Instrukcja obsługi Behringer Instrument/AMP Selector AB100

Behringer system hi-fi Instrument/AMP Selector AB100

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Behringer Instrument/AMP Selector AB100 (2 stron) w kategorii system hi-fi. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/2
Thank you for showing your condence in us by purchasing the BEHRINGER ULTRA METAL UM300.
This high-quality eects pedal comes with a dual-gain circuitry that enables you to produce super thick,
tube-like distortion plus endless sustain. Thanks to its high-performance features you will achieve the
most extreme and sought-after hard rock or heavy metal distortion sounds.
1. Controls
(1) IN 1: this ¼" TS jack is the rst AB100 input. Plug in an instrument here (guitar, bass, etc.).
(2) OUT A: this ¼" TS jack is the rst AB100 output. Plug in an amp or an eect here.
(3) OUT B/IN 2: this ¼" TS jack can be used as a second output or a second input, depending on the
position of selector .(4)
(4) The MODE selector adapts the AB100 to your system: If you play one instrument and two amps,
set MODE in the upper position to get one input for two outputs. In this case, connector serves as (6)
a second output (OUT B). Otherwise, if you play two instruments and one amp, set MODE in the lower
position to get two inputs for one output. In that case, connector serves as a second input (IN 2). (6)
(5) Use the button to set the volume of OUT A. The output is active when the green LED is lit.A LEVEL
(6) When MODE is in the upper position, use the button to set the volume of OUT B. The B LEVEL
output is active when the red LED is lit.
(7) Use the footswitch to noiselessly and instantaneously toggle between two amps (MODE selector in
the upper position) or two instruments (MODE selector in the lower position).
The BATTERY COMPARTMENT is located underneath the pedal cover. To install or replace the 9 V battery,
press the hinges with a ballpen and remove the pedal cover. Be careful not to scratch the unit.
The AB100 has no on/o switch. As soon as you insert the jack into the in connector,
the AB100 begins running. When not using the AB100, remove the jack from the
in connector. This extends the life of the battery.
The is located at the bottom of the unit.SERIAL NUMBER
(6)
(1)
(7)
(5)
(2)
(3)
(4)
INSTRUMENT/AMP SELECTOR AB100
Universal 2-Mode A/B Footswitch
INSTRUMENT/AMP SELECTOR AB100
TECHNICAL SPECIFICATIONS AND APPEARANCES ARE SUBJECT TO CHANGE WITHOUT NOTICE AND ACCURACY IS NOT GUARANTEED. BEHRINGER IS PART OF THE
MUSIC GROUP (MUSIC-GROUP.COM). ALL TRADEMARKS ARE THE PROPERTY OF THEIR RESPECTIVE OWNERS. MUSICGROUP ACCEPTS NO LIABILITY FOR ANY LOSS
WHICH MAY BE SUFFERED BY ANY PERSON WHO RELIES EITHER WHOLLY OR IN PART UPON ANY DESCRIPTION, PHOTOGRAPH OR STATEMENT CONTAINED HEREIN.
COLORS AND SPECIFICATIONS MAY VARY FROM ACTUAL PRODUCT. MUSIC GROUP PRODUCTS ARE SOLD THROUGH AUTHORIZED FULLFILLERS AND RESELLERS
ONLY. FULLFILLERSAND RESELLERS ARE NOT AGENTS OF MUSICGROUP AND HAVE ABSOLUTELY NO AUTHORITY TO BIND MUSICGROUP BY ANY EXPRESS OR
IMPLIED UNDERTAKING OR REPRESENTATION. THIS MANUAL IS COPYRIGHTED. NO PART OF THIS MANUAL MAY BE REPRODUCED OR TRANSMITTED IN ANY FORM
OR BY ANY MEANS, ELECTRONIC OR MECHANICAL, INCLUDING PHOTOCOPYING AND RECORDING OF ANY KIND, FOR ANY PURPOSE, WITHOUT THE EXPRESS
WRITTEN PERMISSION OF MUSICGROUPIPLTD. ALL RIGHTS RESERVED. © 2012 MUSICGroupIPLtd. Trident Chambers, Wickhams Cay, P.O. Box 146, Road Town,
Tortola, British Virgin Islands
2. Safety Instructions
Do not use near water, or install near heat sources. Use only authorized attachments/accessories.
Do not service product yourself. Contact our qualied servicing personnel for servicing or repairs,
especially when power supply cord or plug is damaged.
3. Warranty
Please register your new BEHRINGER equipment right after your purchase by visiting
http://behringer.com and read the terms and conditions of our warranty carefully.
4. Specications
In 1
Connector ¼" TS
Impedance 500 k
Out A
Connector ¼" TS
Impedance 2.2 k
In 2/Out B
Connector ¼" TS
Impedance In 2 500 k
Impedance Out B 2.2 k
Power Supply
9 V, 100 mA DC regulated
PSU-SB-CN 220 VAC adaptor China
BEHRINGER
PSU-SB-EU 230 VAC adaptor Europe
BEHRINGER
PSU-SB-JP 100 VAC adaptor Japan
BEHRINGER
PSU-SB-SAA 240 VAC adaptor Australia
BEHRINGER
PSU-SB-UK 240 VAC adaptor UK
BEHRINGER
PSU-SB-UL 115 VAC adaptor USA
BEHRINGER
Power connector 2 mm DC jack,
negative center
Battery 9 V type 6LR61
Power consumption 25 mA
Physical/Weight
Dimensions approx. 2 ⁄ x 2 ⁄ x 4 ⁄"
(H x W x D) approx. 54 x 70 x 123 mm
Weight approx. 0.73 lbs / 0.33 kg
BEHRINGER is constantly striving to maintain the
highest professional standards. As a result of these efforts,
modifications may be made from time to time to existing
products without prior notice. Specifications and appearance
may therefore differ from those listed or shown.


Specyfikacje produktu

Marka: Behringer
Kategoria: system hi-fi
Model: Instrument/AMP Selector AB100

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Behringer Instrument/AMP Selector AB100, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje system hi-fi Behringer

Instrukcje system hi-fi

Najnowsze instrukcje dla system hi-fi

AKAI

AKAI EIE Pro Instrukcja

13 Października 2024
Sharp

Sharp XL-540H Instrukcja

11 Października 2024
Kenwood

Kenwood M-9000S Instrukcja

10 Października 2024
GoGen

GoGen MSC 472 BTDAB Instrukcja

9 Października 2024
Morel

Morel SUB-10X Instrukcja

9 Października 2024
Morel

Morel USUB 803 Instrukcja

9 Października 2024
Morel

Morel Soundsub PSW8e-w Instrukcja

9 Października 2024
Morel

Morel Sopran 934 Instrukcja

9 Października 2024
NAD

NAD M10 V3 Instrukcja

9 Października 2024
NUVO

NUVO NV-MPS4-E Instrukcja

8 Października 2024