Instrukcja obsługi Behringer Europower PMP3000
Behringer
blender ręczny
Europower PMP3000
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Behringer Europower PMP3000 (17 stron) w kategorii blender ręczny. Ta instrukcja była pomocna dla 24 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/17
Version 1.0 November 2006
User Manual
EUROPOWER
PMP1000/PMP3000/PMP5000
2
EUROPOWER PMP1000/PMP3000/PMP5000
This symbol, wherever it appears, alerts you to the
presence of uninsulated dangerous voltage inside
the enclosure—voltage that may be sufficient to
constitute a risk of shock.
This symbol, wherever it appears, alerts you to
important operating and maintenance instructions
in the accompanying literature. Please read the
manual.
IMPORTANT SAFETY INSTRUCTIONS
CAUTION: To reduce the risk of electric shock, do not remove
the top cover (or the rear section). No user
serviceable parts inside; refer servicing to qualified
personnel.
WARNING: To reduce the risk of fire or electric shock, do not
expose this appliance to rain and moisture. The
apparatus shall not be exposed to dripping or
splashing and no objects filled with liquids, such
as vases, shall be placed on the apparatus.
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions.
8) Do not install near any heat sources such as radiators,
heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
9) Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades
with one wider than the other. A grounding type plug
has two blades and a third grounding prong. The wide
blade or the third prong are provided for your safety. If
the provided plug does not fit into your outlet, consult
an electrician for replacement of the obsolete outlet.
10) Protect the power cord from being walked on or
pinched particularly at plugs, convenience receptacles,
and the point where they exit from the apparatus.
11) The apparatus shall be connected to a MAINS socket
outlet with a protective earthing connection.
12) Where the MAINS plug or an appliance coupler is
used as the disconnect device, the disconnect device
shall remain readily operable.
13) Only use attachments/accessories specified by the
manufacturer.
14) Use only with the cart, stand, tripod, bracket, or table
specified by the manufacturer, or sold with the
apparatus. When a cart is used, use caution when moving
the cart/apparatus combination to avoid injury from
tip-over.
15) Unplug this apparatus during lightning storms or
when unused for long periods of time.
16) Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as power supply cord or plug
is damaged, liquid has been spilled or objects have fallen
into the apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally, or has been
dropped.
17) CAUTION - These service instructions are for use by
qualified service personnel only. To reduce the risk of
electric shock do not perform any servicing other than
that contained in the operation instructions unless you
are qualified to do so.
3
EUROPOWER PMP1000/PMP3000/PMP5000
FOREWORD
Dear Customer,
Welcome to the team of
EUROPOWER users
and thank you very much
for expressing your confi-
dence in BEHRINGER
products by purchasing
this power mixer.
It is one of my most
pleasant tasks to write
this letter to you, because
it is the culmination of
many months of hard
work delivered by our
engineering team to reach
a very ambitious goal:
to present you three
outstanding power
mixers that give you
maximum flexibility and
performance with a unique sound character and broad range of
striking functions. The task to design the new PMP series certainly
meant a great deal of responsibility, which we assumed by
focusing on you, the discerning user and musician. It also meant
a lot of work and night shifts to accomplish this goal. But it was
fun, too. Developing a product usually brings a lot of people
together, and what a great feeling it is when everybody who
participated in such a project can be proud of what we’ve
achieved.
It is our philosophy to share our joy with you, because you
are the most important member of the BEHRINGER team. With
your highly competent suggestions for new products you’ve
greatly contributed to shaping our company and making it
successful. In return, we guarantee you uncompromising quality
as well as excellent technical and audio properties at an extremely
favorable price. All of this will enable you to fully unfold your
creativity without being hampered by budget constraints.
We are often asked how we can make it to produce such high-
grade devices at such unbelievably low prices. The answer is
quite simple: it’s you, our customers! Many satisfied customers
means large sales volumes enabling us to get better conditions
of purchase for components, etc. Isn’t it only fair to pass this
benefit back to you? Because we know that your success is our
success, too!
I would like to thank all people whose help on “Project PMP”
has made it all possible. Everybody has made very personal
contributions, starting from the designers of the unit to the many
staff members in our company and finally to you, the user of
BEHRINGER products.
My friends, it’s been worth the trouble!
Thank you very much,
Uli Behringer CAUTION!
We would like to point out that high volume levels may
damage your hearing and/or your headphones. Please
move down all faders in the MAIN section before turning
on the device. Always make sure that the appropriate
volume is set.
TABLE OF CONTENTS
1 INTRODUCTION ......................................................... 4
1.1 Before you get started ................................................... 4
1.1.1 Shipment ............................................................... 4
1.1.2 Initial operation ...................................................... 4
1.1.3 Online registration ................................................ 4
1.2 The manual ..................................................................... 4
2 CONTROL ELEMENTS ............................................... 5
2.1 Mono and stereo channels ............................................ 5
2.1.1 Input section ......................................................... 5
2.2 Equalizer and FBQ .......................................................... 6
2.3 Effects section ............................................................... 7
2.4 Main and monitor section ................................................ 7
2.4.1 Connectors ........................................................... 8
2.5 Rear panel ...................................................................... 8
3 DIGITAL EFFECTS PROCESSOR ................................ 8
4 INSTALLATION ........................................................... 9
4.1 Mains connection ........................................................... 9
4.2 Audio connections ......................................................... 9
4.3 Loudspeaker connections ........................................... 10
5 WIRING EXAMPLES ................................................. 11
6 SPECIFICATIONS ..................................................... 14
7 WARRANTY .............................................................. 16
FCC— FEDERAL COMMUNICATIONS COMMISSION
COMPLIANCE INFORMATION .................................. 17
Specyfikacje produktu
| Marka: | Behringer |
| Kategoria: | blender ręczny |
| Model: | Europower PMP3000 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Behringer Europower PMP3000, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje blender ręczny Behringer
26 Maja 2024
17 Maja 2024
Instrukcje blender ręczny
- blender ręczny Electrolux
- blender ręczny Smeg
- blender ręczny Gorenje
- blender ręczny Braun
- blender ręczny Severin
- blender ręczny Nedis
- blender ręczny Black & Decker
- blender ręczny Westinghouse
- blender ręczny Taurus
- blender ręczny Blaupunkt
- blender ręczny Siemens
- blender ręczny Concept
- blender ręczny Kenwood
- blender ręczny Moulinex
- blender ręczny Beper
- blender ręczny Morphy Richards
- blender ręczny Instant
- blender ręczny Pyle
- blender ręczny Cecotec
- blender ręczny KitchenAid
- blender ręczny AFK
- blender ręczny Scarlett
- blender ręczny Gastroback
- blender ręczny TC Helicon
- blender ręczny Soundcraft
- blender ręczny Clatronic
- blender ręczny Klark Teknik
- blender ręczny Ariete
- blender ręczny Princess
- blender ręczny Duronic
- blender ręczny TOA
- blender ręczny Becken
- blender ręczny Dualit
- blender ręczny Vitek
- blender ręczny Flama
- blender ręczny OBH Nordica
- blender ręczny Bass Polska
- blender ręczny Bestron
- blender ręczny Optimum
- blender ręczny Rotel
- blender ręczny Midas
- blender ręczny Swan
- blender ręczny Eldom
- blender ręczny Sammic
- blender ręczny Kambrook
- blender ręczny Drawmer
Najnowsze instrukcje dla blender ręczny
28 Września 2024
24 Września 2024
21 Września 2024
21 Września 2024
18 Września 2024
16 Września 2024
16 Września 2024
16 Września 2024
15 Września 2024
15 Września 2024