Instrukcja obsługi Bebob BS2

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Bebob BS2 (2 stron) w kategorii Batterij-oplader. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/2
bebob factory GmbH Höglwörtherstr. 350 Tel.: +49 89 27818282 – D-81379 München –
www.bebob.de
April 2020
B P -S2 ortable simultaneous li ion battery
charger
User Manual
WE STRONGLY RECOMMEND THAT YOU
READ THIS INSTRUCTION BEFORE USING
YOUR BEBOB BS2 CHARGER ! PLEASE
KEEP THIS MANUAL FOR FUTURE
REFERENCE
Features
B- - . 2 Channel Mount simultaneous Li Ion Charger
- Built in AC Adapter. 16,5V 5.0A DC XLR4 Output
14,4V Powerbase Mode.
Charging
Never leave batteries unattended while charging
All Channel Status indicator show green when the charger is turned on with no battery
connected
The Channel Status indicator turns red when a battery is placed on the corresponding channel
and the charging process has begun
The Channel Status indicator turns back green when the battery is fully charged
The Channel Status indicator turns Yellow when a battery is placed on the corresponding
channel and the charging process fails for damage or safety reason.
Cooling fan will be activated during the charging process
AC Adapter
s You can use your BS2 either as an AC Adapter or as a charger. Both function aren´t
possible simultaneously
The charging functions always has priority
V The AC adapter delivers up to 5,0A under 16,5
bebob factory GmbH Höglwörtherstr. 350 Tel.: +49 89 27818282 – D-81379 München –
www.bebob.de
April 2020
Powerbase
f Plug of the AC Cord from the charger
Place one or two full batteries on the charger
Battery Power will be available over the XLR 4 DC Output.
Maximum Load depends on the batteries
Safety instructions
t Only for professional use! Keep Charger out of reach of children and personnel tha has
not been instructed in the use!
U . se only with recommended batteries
Keep the charger dry and do not immerse in water.
Do not cover the charger under use
A standard three pin AC plug must be used and earth pole must be connected to the earth line.-
Do not keep in contact with any part of the body while the charger is in working status.
Do not use or store the charger in unstable, dusty or damp environments.
Remove the battery from the charger after the charging process is complete.
Do not attempt to open or repair the charger. Contact your dealer for help if it becomes
defective.
Handle with care! Do not throw! Do not drop!
Warranty
The BS2 is covered by a 2 years unconditional warranty on all parts.
For warranty issues or if you have any additional questions, please contact the appropriate
bebob distributor listed at www.bebob.de.
S pecifications
Model
BS2
Mount
B- Mount
Channel
2 simultaneous
Charging current
16,8V 2.5A
DC Output
16.5V 5.0A
DC Port
XLR4 1 minus 4 plus
AC In
90 264V/47 63Hz 100W- -
Weight
1,0 Kg
Dimensions (WXHXD)
110 x 231x 141mm
Batteries
bebob, idx, sony
Charging time (bebob VS2/VS4)
d epends on the battery capacity
Operating Temp. Range
- 10°C ~ + 35°C

Specyfikacje produktu

Marka: Bebob
Kategoria: Batterij-oplader
Model: BS2

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Bebob BS2, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Batterij-oplader Bebob

Bebob

Bebob VS2-RL Instrukcja

6 Października 2024
Bebob

Bebob BS2 Instrukcja

6 Października 2024

Instrukcje Batterij-oplader

Najnowsze instrukcje dla Batterij-oplader

Monster

Monster Power Grid 300 Instrukcja

7 Października 2024
Voltcraft

Voltcraft VC-BC4-PB1 Instrukcja

7 Października 2024
Voltcraft

Voltcraft IPC-3 Instrukcja

7 Października 2024
Voltcraft

Voltcraft IPC-4 Instrukcja

7 Października 2024
Voltcraft

Voltcraft BC4 Instrukcja

7 Października 2024
Voltcraft

Voltcraft P4-9 Instrukcja

7 Października 2024
Hive

Hive Bridge Instrukcja

7 Października 2024
AVer

AVer C36i Instrukcja

6 Października 2024
HQ Power

HQ Power PSS6EUSB52 Instrukcja

5 Października 2024