Instrukcja obsługi BDI Avion 8925

BDI szafka pod telewizor Avion 8925

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla BDI Avion 8925 (4 stron) w kategorii szafka pod telewizor. Ta instrukcja była pomocna dla 7 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/4
1
Your Avion® Home Theater Furniture is engineered for easy assembly.
Carefully follow this procedure to prevent any damage.
Placement and Maintenance
Avion® Home Theater Furniture is designed for indoor use on level floors.
Clean glass with glass cleaner, and steel parts and wood veneer with a
moist cloth.
Step 1
Unpack and identify the components at left. Note that some components
are shipped inside the cabinet. The assembly workspace should be a non-
marring surface such as carpet. For missing hardware pieces, please
contact BDI Customer Service at customerservice@bdiusa.com. For all
other concerns, please contact your BDI Retailer.
Step 2
Build and Install Base Assembly
First, remove all internal components from the cabinet including shelves,
hardware box and legs. Carefully lay Assembled Cabinet (F) back-side
down. Using the Hollow Bolt Wrench (C), remove the four (4) pre-installed
Hollow Bolts (D) Metal Leg (H).from Screw the Metal Rail (G) to the top
of with Metal Leg (H) Hollow Bolts (D).
Component List
Designed by BDI Design Studio.
These distinctive product configurations are protected by US and international
patents, trade dress, and/or copyright laws. “Avion” and BDI are trademarks of
Becker Designed, Inc. All Rights reserved. ©2009, BDI
Made in China. 102909v289225REV
Av i o n
®
8925
a s s e m b l y i n s t r u c t i o n s
bdiusa bdiusa.com customerservice@ .com
D - Hollow Bolts x 4
Pre-installed on
Metal Legs (H)
A - Phillips Screwdriver
x 1
C - Hollow Bolt Wrench
x 1
F - Assembled Cabinet
x 1
E - 1/4”-20 x 2”
Machine Screw x 6
G - Metal Rail x 2
I - M4 x 25mm Screws
x 4
J - Handle x 2
K - Adjustable Shelf
x 2
M - Back Panel x 1
H - Metal Leg x 2
B - 4mm Hex Driver
x 2
H
D
G
I
Completed base assembly
Detail view of Hollow Bolts (D)
connecting the to Metal Rail (G)
the top of .Metal Leg (H)
D
H
H
G
NOTE: Make sure
that the larger bolt
opening on Metal Rail
(G) faces toward the
floor.
2
assembly instructions
bdiusa bdiusa.com customerservice@ .com
Step 4
Install on the doors and drawers using theHandles (J) M4 x
25mm Screws (I) Phillips Screwdriver (A) and the supplied.
Step 3
Carefully lay Assembled Cabinet (F) back-side down. Using
one of , attach the completed base 4mm Hex Drivers (B)
assembly to the bottom of the Assembled Cabinet (F) with
1/4”-20 x 2” Machine Screws (E). *Note: Each of the
metal legs has levelers that can be adjusted from inside the
cabinet using one of the 4mm Hex Drivers (B).
J
Adjustable shelf pins (pre-installed) may be repositioned,
allowing you to raise or lower the adjustable shelf to the
desired level. Install Adjustable Shelf (K) inside the left and
right cabinet area. *Note: To place the adjustable shelf
inside the cabinet, the shelf must be tilted sideways to clear
the door opening.
F
Completed base
assembly
I
E x 6
3
assembly instructions
bdiusa bdiusa.com customerservice@ .com
Step 6
Optional fabric speaker or glass insert panel
Avion’s drawer and door fronts feature removable/replaceable
panel inserts to permit customization of your cabinet’s appearance
and utility. (Contact BDI Customer Service at customerservice@
bdiusa.com)
Installing optional panel inserts is quick and easy:
1. From the inside of the door, and starting at one corner of
the pre-installed Glass or Speaker panel insert, carefully pull away
all four sections of the panel retention trim, running along the
perimeter of the insert. (Use a blunt, tapered object or your finger
to start removing the rubber material.)
2. Once the trim material is completely pulled away, remove the
pre-installed panel insert and replace it with the desired panel
insert.
3. Re-install the trim, pressing it carefully back into the groove
around the new panel insert, section by section, to complete the
panel insert installation.
Step 5
Install both to the backside of the cabinet. Back Panels (M)
*Note: Velcro straps are included as wire management for your
convenience.
a. Remove rubber trim and
glass panel.
b. Replace insert panel

Specyfikacje produktu

Marka: BDI
Kategoria: szafka pod telewizor
Model: Avion 8925

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z BDI Avion 8925, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje szafka pod telewizor BDI

BDI

BDI Corridor 8109 Instrukcja

7 Października 2024
BDI

BDI Profile 8479 Instrukcja

7 Października 2024
BDI

BDI Profile 8477 Instrukcja

7 Października 2024
BDI

BDI Valera 9724ES Instrukcja

30 Września 2024
BDI

BDI Avion 8925 Instrukcja

30 Września 2024
BDI

BDI Avion 8927 Instrukcja

30 Września 2024
BDI

BDI Valera 9729ES Instrukcja

30 Września 2024

Instrukcje szafka pod telewizor

Najnowsze instrukcje dla szafka pod telewizor

JYSK

JYSK Aakirkeby (120x37x45) Instrukcja

11 Października 2024
Ikea

Ikea SPIKSMED 705.655.09 Instrukcja

9 Października 2024
One For All

One For All WM 7431 Instrukcja

9 Października 2024
Ikea

Ikea FRYKSÅS 805.793.27 Instrukcja

8 Października 2024
Hama

Hama 220874 Instrukcja

8 Października 2024
Hama

Hama 220875 Instrukcja

8 Października 2024
Ikea

Ikea LAPPLAND 803.525.69 Instrukcja

7 Października 2024
Ikea

Ikea LAPPLAND 802.851.55 Instrukcja

7 Października 2024
Ikea

Ikea LAPPLAND 302.851.53 Instrukcja

7 Października 2024
Ikea

Ikea HEMNES 303.529.01 Instrukcja

7 Października 2024