Instrukcja obsługi Baumr-AG HT2 E-FORCE 200

Baumr-AG nożyce do żywopłotu HT2 E-FORCE 200

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Baumr-AG HT2 E-FORCE 200 (13 stron) w kategorii nożyce do żywopłotu. Ta instrukcja była pomocna dla 14 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/13

User Manual

[Revision 2.0 April 2021]

READ THIS MANUAL CAREFULLY BEFORE USE FAILURE TO DO SO MAY RESULT IN INJURY, PROPERTY DAMAGE AND –

MAY VOID WARRANTY. • . • Products covered by this manual may vary in KEEP THIS MANUAL FOR FUTURE REFERENCE

appearance, assembly, inclusions, specifications, description, and packaging.

THE BATTERY MAY A H VE SOME CHARGE ON ARRIVAL, IT IS IMPORTANT

HOWEVER THAT THE BATTERY T IS CHARGED PRIOR O USE.

Cordless Hedge Trimmer

Table of Contents

Safety ............................................................................................................................................................................ 1

General Safety Precautions 1............................................................................................................................

Safety Precautions for Batteries and Chargers ............................................................................................... 2

Safety Precautions for Hedge Trimmers 3.........................................................................................................

Electrical Safety ............................................................................................................................................... 4

Components .................................................................................................................................................................. 5

Set- 6Up ............................................................................................................................................................................

Fitting and Removing the Battery .................................................................................................................... 6

Operation ....................................................................................................................................................................... 7

Intended Use ................................................................................................................................................... 7

Charging the Battery ....................................................................................................................................... 7

Charging Procedure .................................................................................................................................. 8

Important Charging Notes ......................................................................................................................... 8

Switching ON and OFF 9...................................................................................................................................

Switching On ............................................................................................................................................. 9

Switching off .............................................................................................................................................. 9

Maintenance 9................................................................................................................................................................

Technical Specifications ........................................................................................................................................ 10

Cordless Hedge Trimmer

Safety

General Safety Precautions

Know your tool

•

•• WARNING! Carefully observe the instructions in this manual to reduce the risk of personal injury or material

damage.

•

•• Read all of this manual carefully before operating the tool.

•

•• Before operating the tool, make sure that you know how to switch the tool off in an emergency.

•

•• Retain this manual for future reference.

•

•• WARNING! Read all instructions, failure to follow all instructions listed below may result in electric shock, fire

and/or serious injury. The term “power tool” in all of the warnings listed below refers to your battery operated

(cordless) power tool.

•

•• SAVE THESE INSTRUCTIONS.

•

•• Work area

−

−− Keep work area clean and well lit. Cluttered and dark areas invite injuries.

−

−− Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids,

gases or dust. Power tools create sparks which may ignite the dust or fumes.

−

−− Keep children and bystanders away while operating a power tool. Distractions can cause you to lose

control.

•

•• Electrical safety

−

−− Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges and refrigerators.

There is an increased risk of electric shock if your body is earthed or grounded.

−

−− Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of

electric shock.

•

•• Personal safety

−

−− Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a

power tool while you’re tired or under the influence of drugs, alcohol or medication. A moment of

inattention while operating power tools may result in serious personal injury.

−

−− Use safety equipment. Always wear eye protection. Safety equipment such as dust mask, non-skid

safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal

injuries.

−

−− Avoid accidental starting. Ensure the switch is in the off position before plugging in. carrying power tools

with your finger on the switch or plugging in power tools that have the switch on invites accidents.

−

−− Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to

a rotating part of the power tool may result in personal injury.

−

−− Do not overreach. Keep proper footing and balance at all times. This enables better control of the power

tool in unexpected situations.

−

−− Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away from

moving parts. Loose clothes, jewellery or long hair can be caught in moving parts.

−

−− If devices are provided for the connection of dust extraction and collection facilities, ensure these are

connected and properly used. Use devices can reduce dust related hazards.of these

Specyfikacje produktu

Marka:	Baumr-AG
Kategoria:	nożyce do żywopłotu
Model:	HT2 E-FORCE 200

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Baumr-AG HT2 E-FORCE 200, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje nożyce do żywopłotu Baumr-AG

Baumr-AG HT2 E-FORCE 200 Instrukcja

21 Sierpnia 2024

Baumr-AG BCX720 Instrukcja

3 Lipca 2024

Instrukcje nożyce do żywopłotu

Najnowsze instrukcje dla nożyce do żywopłotu

Kibani WPET1206 - XXL Instrukcja

15 Października 2024

Tanaka THT-2000SB Instrukcja

15 Października 2024

Black & Decker BHT518 Instrukcja

14 Października 2024

MacAllister MHTP24EB Instrukcja

13 Października 2024

Husqvarna 226HS99S Instrukcja

12 Października 2024

Husqvarna 122HD60 Instrukcja

11 Października 2024

Florabest FHT 600 B2 Instrukcja

11 Października 2024

Ozito PXCGSS-018 Instrukcja

10 Października 2024

Einhell Royal HEC 551 Instrukcja

9 Października 2024

Dolmar HT-2460 Instrukcja

9 Października 2024