Instrukcja obsługi Bauknecht GSF star

Bauknecht zmywarka GSF star

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Bauknecht GSF star (4 stron) w kategorii zmywarka. Ta instrukcja była pomocna dla 6 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/4

Further indications are given in the pages to follow and in the user instructions.

Rinse aid level indicator

Add rinse aid.

Salt level indicator

Add regeneration salt; only add

regeneration salt immediately before

starting a wash programme.

Programme progress indicator Option

Delayed start button

The wash cycle can be programmed to start after 3-6-9 hours.

Then press the Start button.

The dishwasher will start at the set time.

Start button

Indicator lamp lit while the dishwasher is operating.

Flashes when a fault occurs.

Switches off at the end of the programme.

On / Off Button

Pre-rinse /

Pre-wash

Washing

Drying

Programme end

Programme Symbol

and Temperature

Programme selection and

recommended load type

Place the detergent in the:

Consumption 1)

Normal load

small

compartment

large

compartment

Water

(Litres)

Energy

(kWh)

Time

(Min.)

Pre-wash Crockery to be washed later. - - 95.0 0.02

Rapid 40° C Lightly soiled crockery with no dried-on food. - X 13.0 0.85 30

Bio-Normal 50° C 2) Normally or heavily soiled crockery with dried-on food. X X 16.0 1.05 120

Normal 65° C 3) Normally or heavily soiled crockery with dried-on food. X X 16.0 1.60 86

Intensive 70° C Heavily soiled pans and saucepans. X X 21.5 1.70 93

Quick Reference Guide

5019 100 90355

(We reserve the right to make technical modifications)

1) Values may vary in relation to usage, e.g.: different loads, water temperatures -

above or below 15° C - as well as water hardness and power supply voltage.

2) Programme recommended when using detergents of type B (enzyme-based detergents).

Reference programme for energy label.

3) Programme recommended when using detergents of type A (non enzyme-based detergents).

GSF STAR

1. After loading the dishwasher, close the

door properly and open the water

supply tap.

2. Press the On/Off button to switch the

dishwasher on.

One of the programme

indicator lamps will switch on.

3. Select the desired programme by

pressing the corresponding button.

The corresponding indicator lamp

lights up. If required, select options (if

supplied).

4. Press the Start button to start the

selected programme. The Start

indicator lamp will light up. Once set,

the programmed data cannot be

altered by pressing the programme

selector buttons.

Note: once the Start button has been

pressed, the dishwasher memorises

the last programme selected. This

information remains in the memory

even during interruption of the power

supply.

To change the selected

programme, press the Start button

for about 5 seconds, until the Start

indicator lamp switches off.

Select a new programme and press

the Start button.

Note: if the dishwasher is switched off

during a wash programme, when

switched on again it will resume the wash

cycle from where it was interrupted.

Only open the dishwasher door if

strictly necessary during a wash

cycle and exercise maximum

caution. Danger of scalding from

steam.

5. To indicate the end of the programme,

the Start indicator lamp switches off

and the End indicator lamp (if fitted)

lights up (for about 30 min.).

6. Once the Start indicator lamp has

switched off press the On/Off button to

switch the dishwasher off. All the

indicator lamps switch off.

7. Open the door (warning: beware of hot

steam). Unload the lower rack before

the upper one. Close the water tap.

Upper rack

Rack height adjustment:

(The dishwasher is delivered with the

upper rack in the top position).

The rack height can also be changed

when loaded.

• To lower: pull out the two side

handles and gently lower the rack.

• To raise: pull up the two side handles

until the rack clicks into place.

•The rack must be level on both sides.

Crockery holders:

• Down: cups and long-stemmed

glasses.

•Up: plates.

Glass holder:

Lower rack

Plate holders:

• May be lowered to increase

available space (A).

Cutlery basket:

• The cutlery basket can be removed to

increase (C) available space.

• Some models are provided with a

grid (D) that can be fitted onto the

cutlery basket.

How to use the dishwasher

Please read the user instructions carefully.

Upper and lower rack

Tips and advice

•Arrange crockery so that items do not

touch each other. Arrange large

crockery in the lower rack and smaller

crockery in the upper rack.

•Load cups at an angle to facilitate

water drainage.

•Generally speaking, place cutlery in the

basket with the handles positioned

downwards, but ensure that any sharp

knives and forks that might cause

injury are placed in the basket with the

handles positioned upwards.

•Make sure the water jet can reach all

loaded items and that the spray arms

turn freely.

Important

•Fill the detergent dispenser and check

the salt and rinse aid level.

•Do not use the appliance for items not

suitable for washing in a dishwasher,

for example: wooden items, aluminium,

plastic utensils, tin, hand-decorated

crockery (unglazed), silver cutlery.

•Do not put liquid fat in the dishwasher

(e.g. oil used for frying) or candle wax.

•If a fault occurs or you wish to change

the current programme, press the

“ ”START button for about 5 seconds

until the Start indicator lamp switches

off.

•If regeneration salt is to be added,

immediately start a wash programme

in order to eliminate any residual salt

(rinsing alone is not sufficient).

•Sometimes even though the

regeneration salt container has been

filled, the corresponding indicator lamp

(if fitted) will light up during the first

wash cycle after filling with salt.

•Before starting a wash programme,

make sure that the spray arms can turn

freely and are not impeded by crockery

or cutlery.

•Only switch off the dishwasher once

the “Start” indicator lamp has switched

off. If the dishwasher is switched off

during a wash cycle, when switched on

again it will resume the cycle from

where it was interrupted without having

to start it again.

If a fault occurs, before contacting our

After-Sales Service, make the following

checks to try and remedy the problem:

The dishwasher is not working:

•Is the plug properly inserted in the wall

socket?

•Is there a power failure?

•Is the dishwasher switched on?

•Has the Start button been pressed?

•Has the delayed start timer been set

(if fitted)?

•Is the water supply tap on?

•Is the flow of water obstructed by

impurities? If so, close the water supply

tap, detach the water hose and clean the

filter. Then re-connect the water hose to

the tap and open the water tap once again.

•Are the filters clogged? (See

“Care and maintenance” chapter in the

user instructions).

•Is the door closed properly?

•Is a fault indicated?

(The Start indicator lamp flashes).

Start the programme again from the

beginning: press the Start button for

about 5 seconds, until the Start indicator

lamp switches off.

Select a new programme and press the

Start button.

Crockery still dirty after washing:

•Was the crockery loaded properly?

•Crockery must be loaded facing

downwards; this is important, especially

for large items of crockery.

•The water jets must spray the entire

surface of all items.

•Make sure that crockery and cutlery are

arranged properly.

•Have you selected the correct programme?

•Did you use too much or too little

detergent? (The use of poor quality

detergents may result in less effective

washing).

•Are the filters clogged or incorrectly

assembled? (See “Care and Maintenance”

chapter in the user instructions).

•Are the spray arms blocked or the nozzles

clogged? (See “Care and Maintenance”

chapter in the user instructions).

•Is the lower spray arm correctly fitted?

•Is the salt container cap (water softening

system) screwed down?

Marked crockery:

•Is the water hardness level selector not

properly adjusted? See (“Filling the salt

container” in the user instructions).

• “Is the salt container empty? (See Filling

the salt container” in the user instructions).

•Was insufficient detergent used? (See

“Filling the detergent dispenser” in the

user instructions).

Marked glasses and cutlery:

•Was too much rinse aid used? (See

“Filling the rinse aid dispenser” in the user

instructions).

Note: with some models, when the Start

button is pressed a pre-wash cycle precedes

the actual wash programme; this

regenerates the water softening system.

If after carrying out the above checks the

malfunction persists or appears again,

turn the appliance off and turn off the

water supply tap, then call our After-Sales

Service (see guarantee). Please specify:

•The nature of the fault.

•The appliance type and model.

•The service code (the number after the

word Service on the adhesive rating plate)

inside the door on the right-hand side.

•Your full address and telephone number.

AFTER-SALES

SERVICE

Troubleshooting Guide

Please read the user instructions carefully.

Specyfikacje produktu

Marka:	Bauknecht
Kategoria:	zmywarka
Model:	GSF star

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Bauknecht GSF star, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje zmywarka Bauknecht

Bauknecht B2F HD624 A Instrukcja

21 Września 2024

Bauknecht BK7IPA15BM6L0 Instrukcja

21 Września 2024

Bauknecht BFC 3C26 Instrukcja

20 Czerwca 2024

Bauknecht GSFH Symphony 05 Instrukcja

20 Czerwca 2024

Bauknecht GSIP 6798 in Instrukcja

20 Czerwca 2024

Bauknecht GSIP 6627 2 in Instrukcja

20 Czerwca 2024

Bauknecht GSU 81414 Instrukcja

20 Czerwca 2024

Bauknecht GSU 4591 Instrukcja

20 Czerwca 2024

Bauknecht GSU 5531 Instrukcja

20 Czerwca 2024

Bauknecht GSU 5545 Instrukcja

20 Czerwca 2024

Instrukcje zmywarka

Najnowsze instrukcje dla zmywarka

Gaggenau DF271100 Instrukcja

12 Października 2024

Gaggenau GI 256-161 Instrukcja

11 Października 2024

Miele G5050SCVI Instrukcja

9 Października 2024

Daewoo DA1D5SW0ES-2 Instrukcja

26 Września 2024

Daewoo DA248FI0ES-2 Instrukcja

26 Września 2024

Daewoo DA248FI7ES Instrukcja

26 Września 2024

Daewoo DA1D5SI0ES-2 Instrukcja

26 Września 2024

Daewoo DA134FW1ES Instrukcja

26 Września 2024

Daewoo DA134FI1ES Instrukcja

26 Września 2024

Daewoo DA1D5FW1ES Instrukcja

26 Września 2024