Instrukcja obsługi Bauknecht BRIE 2B19 A

Bauknecht zmywarka BRIE 2B19 A

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Bauknecht BRIE 2B19 A (8 stron) w kategorii zmywarka. Ta instrukcja była pomocna dla 10 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/8
1
EN
DAILY REFERENCE
GUIDE
THANK YOU FOR BUYING A BAUKNECHTPRODUCT.
In order to receive a more complete assistance, please
register your appliance on:
www.bauknecht.eu/register
You can download the Safety Instructions and the Use
and Care Guide, by visiting our website
http://docs.bauknecht.eu and following the
Instructions on the back of this booklet.
Before using the appliance carefully read Health and Safety guide.
PRODUCT DESCRIPTION
APPLIANCE
1.Upper rack
2. Foldable flaps
3.Upper rack height adjuster
4.Upper spray arm
5.Lower rack
6.Cutlery basket
7.Lower spray arm
8.Filter Assembly
9.Salt reservoir
10.Detergent and Rinse Aid dispensers
11.Rating plate
12.Control panel
0000 000 00000
Service:
1
2
3
4
5
6
10
12
7
11
9
8
CONTROL PANEL
1. On-Off/Reset button with indicator light
2. Program selection button
3. Salt refill indicator light
4. Rinse Aid refill indicator light
5. Program indicator lights
1 2 3 4 5
2
FIRST TIME USE
SALT, RINSE AID AND DETERGENT
ADVICE REGARDING THE FIRST TIME USE
After installation, remove the stoppers from the racks and the retaining
elastic elements from the upper rack.
FILLING THE SALT RESERVOIR
The use of salt prevents the formation of LIMESCALE on the dishes and
on the machine’s functional components.
It is important that the salt reservoir be never empty.
It is important to set the water hardness.
The salt reservoir is located in the lower part of the dishwasher (see
PROGRAMS DESCRIPTION) and should be filled when the SALT REFILL
indicator light in the control panel is lit.
1.Remove the lower rack and unscrew the
reservoir cap (anticlockwise).
2.Position the funnel
(see figure)
and fill the salt
reservoir right up to its edge (approximately 1 kg);
it is not unusual for a little water to leak out.
3.Remove the funnel and wipe any salt residue
away from the opening.
Make sure the cap is screwed on tightly, so that no detergent can get
into the container during the wash program (this could damage the
water softener beyond repair).
Whenever you need to add salt, we recommend carrying out the
procedure before the washing cycle is started.
SETTING THE WATER HARDNESS
To allow the water softener to work in a perfect way, it is essential that
the water hardness setting is based on the actual water hardness in
your house. This information can be obtained from your local water
supplier.
The factory setting is for average (3) water hardness.
1. Switch on the appliance by pressing the
ON/OFF
button.
2. Switch off the appliance by pressing the
ON/OFF
button.
3. Hold down button
P
for 5 seconds, until you hear a beep.
4. Switch on the appliance by pressing the
ON/OFF
button.
5. The current selection level number and the salt indicator light both
flash. The program indicator light of the current set level flashes.
6. Press button
P
to select the desired hardness level
(see Water
Hardness Table).
7. Switch off the appliance by pressing the
ON/OFF
button.
Setting is complete!
As soon as this procedure is complete, run a program without loading.
Only use salt that has been specifically designed for dishwashers.
After the salt has been poured into the machine, the SALT REFILL
indicator light switches off.
If the salt container is not filled, the water softener and the heating
element may be damaged as a result.
FILLING THE RINSE AID DISPENSER
Rinse aid makes dish DRYING easier. The rinse aid dispenser AB should
be filled when the RINSE AID REFILL indicator light in the control
panel is lit.
1. Open the dispenser by turning the cap
A
in an anticlockwise
direction. Open the dispenser
B
by pressing and pulling up the tab
on the lid.
2. Carefully introduce the rinse aid as far as the maximum (110 ml)
reference notch of the filling space - avoid spilling it. If this happens,
clean the spill immediately with a dry cloth.
3. Screw the cap back on. Press the lid down until you hear a click to
close it.
NEVER pour the rinse aid directly into the tub.
ADJUSTING THE DOSAGE OF RINSE AID
If you are not completely satisfied with the drying results, you can ad-
just the quantity of rinse aid used.
Switch the dishwasher on using the ON/OFF button.
Switch it off using the ON/OFF button.
Press button
P
three times - a beep will be heard.
Switch it on using the ON/OFF button.
The current selection level number and rinse aid indicator light
flash.
The program indicator light of the current set level flashes.
Press button P to select the level of rinse aid quantity to be
supplied.
Switch it off using the ON/OFF button
Setting is complete!
If the rinse aid level is set to ZERO 1 (ECO), no rinse aid will be supplied.
The LOW RINSE AID indicator light will not be lit if you run out of rinse
aid.
A maximum of 4 levels can be set according to the dishwasher model.
The factory setting is for a medium level.
If you see bluish streaks on the dishes, set a low number (1-2)(2-3).
If there are drops of water or limescale marks on the dishes, set a
high number (3-4)(4-5).
Water Hardness Table
Level °dH
German degrees
°fH
French degrees
1 Soft 0 - 6 0 - 10
2 Medium 7 - 11 11 - 20
3 Average 12 - 17 21 - 30
4 Hard 17 - 34 31 - 60
5 Very hard 35 - 50 61 - 90
M
A
X
A
B
35
25
3
EN
FILLING THE DETERGENT DISPENSER
To open the detergent
dispenser use the opening
device A.
Introduce the detergent into
the dry dispenser B only.
Place the amount of
detergent for pre-washing
directly inside the tub.
1. When measuring out the detergent refer to the
(see PROGRAMS
TABLE)
to add the proper quantity. Compartment
B
comprises a
level showing the maximum quantity of liquid or powder detergent
that can be added to each cycle.
2. Remove detergent residues from the edges of the dispenser and
close the cover until it clicks.
3. Close the lid of the detergent dispenser by pulling it up until the
closing device is secured in place.
The detergent dispenser automatically opens up at the right time
according to the program.
A
B
PROGRAMS TABLE
ECO program data is measured under laboratory conditions according to European Standard EN 50242.
*) Not all options can be used simultaneously.
**) The duration of the program shown on the display or in the booklet is an estimate calculated on standard conditions. The actual time may vary
depending on many factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of load,
load balancing, additional selected options and sensor calibration. The sensor calibration can increase program duration up to 20 min.
Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W
PROGRAMS DESCRIPTION
Instructions on wash cycle selection.
ECO
Normally soiled crockery. Standard program, the most efficient in terms
of its combined energy and water consumption.
INTENSIVE
Program recommended for heavily soiled crockery, especially suitable
for pans and saucepans (not to be used for delicate items).
NORMAL
Normally soiled crockery. Everyday cycle, that ensures optimal cleaning
performance in shorter time.
RAPID40’
Program to be used for lightly-soiled dishes with no dried food
residues. Ideal for 2 place settings.
HALF LOAD
Ideal for washing a half load of lightly or normally soiled crockery.
PRE-WASH
Crockery to be washed later. No detergent to be used with this
program.
Notes:
Optimum performance levels when using the “Rapid” program can be
achieved by observing the maximum amounts of specified place
settings.
To reduce consumption even further, only run the dishwasher
when it is full.
Program
Drying
phase
Detergent container Duration of wash program
(h:min)**) Water consumption
(litres/cycle)
Energy consumption
(kWh/cycle)
Tub B
1. Eco 50°C 3:10 11.0 1.04
2. Intensive 65°C 2:30 16.5 1.65
3. Normal 55°C - 2:00 16.0 1.35
4. Rapid 40’ 50°C - - 0:40 9.0 0.90
5. Half Load 50°C - 1:20 12.0 1.10
6. PreWash - - - - 0:10 4.0 0.04


Specyfikacje produktu

Marka: Bauknecht
Kategoria: zmywarka
Model: BRIE 2B19 A

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Bauknecht BRIE 2B19 A, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje zmywarka Bauknecht

Instrukcje zmywarka

Najnowsze instrukcje dla zmywarka

Asko

Asko DBI 644 MIB.S Instrukcja

28 Października 2024
Asko

Asko DFI675XXL Instrukcja

28 Października 2024
Kenmore

Kenmore 12413 Instrukcja

21 Października 2024
Kenmore

Kenmore 13223 Instrukcja

21 Października 2024
Gaggenau

Gaggenau DA045060 Instrukcja

12 Października 2024
Gaggenau

Gaggenau DA045061 Instrukcja

12 Października 2024
Gaggenau

Gaggenau DF271100 Instrukcja

12 Października 2024
Gaggenau

Gaggenau GI 256-161 Instrukcja

11 Października 2024
Miele

Miele G 5132 Selection Instrukcja

10 Października 2024