Instrukcja obsługi Bauknecht B0U D641A X

Bauknecht Pomywaczka B0U D641A X

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Bauknecht B0U D641A X (12 stron) w kategorii Pomywaczka. Ta instrukcja była pomocna dla 7 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/12

ENQuick Guide

THANK YOU FOR BUYING A BAUKNECHT PRODUCT.

In order to receive a more complete assistance, please

CONTROL PANEL

FIRST TIME USE

PROGRAMS TABLE

Before using the appliance carefully read the Safety Instruction.

PLEASE SCAN THE QR CODE ON YOUR

APPLIANCE IN ORDER TO HAVE MORE

DETAILED INFORMATION

1454 6 7 9 1210 11

FILLING THE SALT RESERVOIR

The use of salt prevents the formation of LIMESCALE on the dishes and on

the machine’s functional components.

• It is mandatory that the salt reservoir never be empty.

• It is important to set the water hardness.

The salt reservoir is located in the lower part of the dishwasher and must be

lled when the SALT REFILL indicator light in the control panel is lit.

1. Remove the lower rack and unscrew the reservoir cap

(anticlockwise).

2. Only the rst time you do this: ll the salt reservoir

with water.

3. Position the funnel and ll the salt reservoir (see gure)

right up to its edge (approximately 1 kg); it is not unu-

sual for a little water to leak out.

4. Remove the funnel and wipe any salt residue away from the opening.

Make sure the cap is screwed on tightly, so that no detergent can get into

the container during the wash program (this could damage the water

softener beyond repair).

Whenever you need to add salt, it is mandatory to complete the proce-

dure before the beginning of the washing cycle to avoid corrosion.

FILLING THE RINSE AID DISPENSER

Rinse aid makes dish DRYING easier. The rinse

aid dispenser should be lled when the A RINSE

AID REFILL indicator light in the control pan-

el is lit.

NEVER pour the rinse aid directly into the ap-

pliance tub.

FILLING THE DETERGENT DISPENSER

To open the detergent dispenser use the opening device C. Introduce the

detergent into the dry dispenser only. Place the amount of detergent for D

pre-washing directly inside the tub.

If all-in-one detergents are used, we recommend using the TABLET button,

because it adjusts the program so that the best washing and drying results

are always achieved.

Usage of detergent not designed for dishwashers may cause

malfunction or damage to the appliance.

WATER SOFTENING SYSTEM

Water softener automatically reduces water hardness, consequently

preventing scale buildup on heater, contributing also to better cleaning

eciency. This system regenerates itself with salt, therefore it is

required to rell salt container when empty.

Frequency of regeneration depends on water hardness level setting -

regeneration takes place once per Eco cycles with water hardness level 6

set to . 3

Regeneration process starts in nal rinse and nishes in drying phase,

before cycle ends.

• Single regeneration consumes: ~3.5L of water;

• Takes up to 5 additional minutes for the cycle;

• Consumes below 0.005kWh of energy.

Pro-

gram Programs description

Drying

phase

ActiveDry

Available

options *)

Duration

of wash

program

(h:min)**)

Water

consumption

(litres/cycle)

Energy

consumption

(kWh/cycle)

Eco 50°- Program is suitable to clean normally soiled tableware,

that for this use, it is the most ecient programme in terms of

its combined energy and water consumption, and that it is used

to assess compliance with the EU Ecodesign legislation. 3:10 9.5 0.75

2. Sensor 50°-60° - For normally soiled dishes with dried food re-

sidues. Senses the level of soiling on the dishes and adjusts the

program accordingly. 1:25 - 3:00 7.0 - 14.0 0.90 - 1.40

3. Intensive 65° - Program recommended for heavily soiled croc-

kery, especially suitable for pans and saucepans. 2:50 17.0 1.60

4. Fast Wash&Dry 50° - Normally soiled crockery. Everyday cycle,

that ensures optimal cleaning and drying performance in shor-

ter time. 1:25 11.5 1.10

5. Glass 45° - Program for delicate items, which are more sensitive

to high temperatures, for example glasses and cups. 1:40 12.0 1.20

6. Rapid 30’ 50° - Program to be used for half load of lightly-soiled

dishes with no dried food residues. Without drying. - 0:30 9.0 0.50

7. Silent - 50° Suitable for night-time operation of the appliance.

With the lowest noise. 3:30 16.0 1.15

8. Prewash - Use to refresh crockery planned to be washed later.

No detergent to be used with this program. - - 0:12 4.5 0.01

1. On-O/Reset button with indicator light

2. Program selection button with indicator light

3. Multizone button with indicator light / Key lock

4. Eco program indicator light

5. Key lock indicator light

6. Display

7. Program number and remaining time indicator

8. Tablet (Tab) indicator light

9. Closed water tap indicator light

10. Rinse Aid rell indicator

light

11. Salt rell indicator light

12. Sani Rinse button with

indicator light / Tablet

(Tab)

13. Delay button with

indicator light

14. Start/Pause button with indicator light / Drain out

Quick GuideEN

DELAY -The start of the program may be delayed for a period of time

between and hours.0:30 24

The DELAY function cannot be set once a wash cycle has been started.

TABLET (Tab)- If you use powder or liquid detergent, this option

should be o.

OPTIONS AND FUNCTIONS

OPTIONS can be selected directly by pressing the corresponding button (see CONTROL PANEL). If an option is not compatible with the selected

program (see PROGRAMS TABLE), the corresponding LED ashes rapidly 3 times and beeps will sound. The option will not be enabled.

Please scan on your product in order to have more detailed information. the QR code

ActiveDry

is aconvection drying system which automatically opens the door

during/after drying phase to ensure exceptional drying performance every

day. Door opens at the temperature that is safe to your kitchen furniture, thus

door will not be opened when the option of SANI RINSE is on.

LOADING THE RACKS CAPACITY: 14 standard place-settings

LOWER RACK

For pots, lids, plates, sa-

lad bowls, cutlery etc.

Large plates and lids

should ideally be pla-

ced at the sides to avo-

id interferences with

the spray arm.

The lower rack has tip-

-up supports which

can be used in a verti-

cal position when ar-

ranging plates or in a

horizontal position (lo-

wer) to load pans and

salad bowls easily.

(loading example for the

lower rack)

CUTLERY RACK

(loading example for the cutlery rack)

The third rack was designed to

house the cutlery.

UPPER RACK

(loading example for the upper rack)

Load delicate and light dishes: glasses,

cups, saucers, low salad bowls.

FOLDABLE

FLAPS WITH

ADJUSTABLE

POSITION

More information in the Daily Reference Guide on website.

CLEANING AND MAINTENANCE

CLEANING THE FILTER ASSEMBLY CLEANING THE SPRAY ARMS

In case you nd foreign objects (such as broken glass, porcelain, bones, fruit seeds etc.)

please remove them carefully.

NEVER REMOVE the wash-cycle pump protection (black detail) (Fig 4).

To remove the upper spray arm,

turn the plastic locking ring in a

clockwise direction.

The lower spray arm may

be removed by pulling it

upwards.

ECO program data is measured under laboratory conditions according to European Standard EN 60436:2020.

Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following address: dw_test_support@whirlpool.com

Pre-treatment of the dishes is not needed before any of the programs.

*) Not all options can be used simultaneously.

**) Values given for programs other than the program Eco are indicative only. The actual time may vary depending on many factors such as temperature and

pressure of the incoming water, room temperature, amount of detergent, quantity and type of load, load balancing, additional selected options and sensor

calibration. The sensor calibration can increase program duration up to 20 min.

KEYLOCK - A long press (for 3 seconds) of MULTIZONE button, will ac-

tivate the KEYLOCK function. To deactivate the KEYLOCK, long press again.

SANI RINSE - This option can be used to sanitize washed dishes. It will

increase nal rinse temperature and add antibacterial wash to the se-

lected program. WARNING: the crockery and plates could be extremely

hot at the end of the cycle.

MULTIZONE - If there are not many dishes to be washed, a half loading

may be used in order to save water, electricity and detergent.

Bydefault the appliance washes dishes in all racks.

CUTLERY BASKET

It is tted with top grids for improved cutlery arrange-

ment. It must only be positioned at the front of the

lower rack.

Knives and other utensils with sharp edges must be

placed in the cutlery basket with the points facing

downwards or they must be positioned horizontally

in the tip-up compartments on the upper rack.

GLASS CARE

2 3

Dedicated accessory that allows you to safely

store dierent types of stem glasses in the

lower rack.

It enables cleaning & drying results by allow-

ing an optimised and stable positioning of the

glasses.

ENQuick Guide

PROBLEMS POSSIBLE CAUSES SOLUTIONS

The dishwasher does

not ll the water. Display

shows: and , both F6

On/O and START/Pause

LEDs are blinking rapidly.

No water in the water supply or the tap

is closed. Make sure there is water in the water supply or the tap running.

The inlet hose is bent. Make sure the inlet hose is not bent (see INSTALLATION) reprogram the dishwash-

er and reboot.

The sieve in the water inlet hose is

clogged; it is necessary to clean it.

After having carried out the verication and cleaning, turn o and turn on the

dishwasher and restart anew program.

Dishwasher nishes the

cycle prematurely. Display

shows: and both On/F15

O and START/Pause LEDs

are blinking rapidly.

Drain hose positioned too low or si-

phoning into home sewage system.

Check if end of drain hose is placed at correct height (see INSTALLATION).Check

for siphoning into home sewage system, install air admittance valve if necessary.

Air in water supply. Check water supply for leaks or other issues letting air inside.

In case your dishwasher doesn’t work properly, check if the problem can be solved by going through the following list. For other errors or issues

please contact authorized After-sales Service which contact details can be found in the warranty booklet. Spare parts will be available for a period

of either up to 7 or up to 10 years, according to the specic Regulation requirements.

TROUBLESHOOTING

Please scan the on your product in order to have more detailed information. QR code

Policies, standard documentation, ordering of spare parts and additional product information can be found by:

• Using QR code on your product.

• Visiting our website docs.bauknecht.eu and parts-selfservice.whirlpool.com

• Alternatively, contact our After-sales Service (See phone number in the warranty booklet). When contacting our After-sales

Service, please state the codes provided on your product’s identication plate.

The model information can be retrieved using the QR-Code indicated on the energy label. The label also includes the model

identier that can be used to consult the https://eprel.ec.europa.eu database portal.

IEC 436

Specyfikacje produktu

Marka:	Bauknecht
Kategoria:	Pomywaczka
Model:	B0U D641A X

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Bauknecht B0U D641A X, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje Pomywaczka Bauknecht

Bauknecht GSXK 5011 A+ Instrukcja

15 Października 2024

Bauknecht B0I D551A S Instrukcja

9 Października 2024

Bauknecht BCIO 3T133 PFETC Instrukcja

9 Października 2024

Bauknecht B0U D651A X Instrukcja

8 Października 2024

Bauknecht B0U D641A X Instrukcja

8 Października 2024

Bauknecht B0F D641A X Instrukcja

8 Października 2024

Bauknecht B0F D651A X Instrukcja

8 Października 2024

Bauknecht B0B D641A X Instrukcja

8 Października 2024

Bauknecht BBC 3C26 X Instrukcja

8 Października 2024

Bauknecht GSF Symphony Active Instrukcja

7 Października 2024

Instrukcje Pomywaczka

Najnowsze instrukcje dla Pomywaczka

Zanussi ZDV14003FA Instrukcja

15 Października 2024

Midea MFD60S230X-IT Instrukcja

15 Października 2024

V-Zug GS60Ni3n Instrukcja

15 Października 2024

Miele G 5051 SCVi Active Instrukcja

15 Października 2024

Freggia DWI4108 Instrukcja

15 Października 2024

Küppersbusch IG 659 1 Instrukcja

14 Października 2024

Whirlpool WDT740SALB Instrukcja

14 Października 2024

Hotpoint LSTA+ 216 A/HA Instrukcja

14 Października 2024

Grundig GNUP4530W Instrukcja

14 Października 2024

Grundig GNLP4620X Instrukcja

14 Października 2024