Instrukcja obsługi Bauhn Charge Tower Pro MPP 6000-S

Bauhn Niesklasyfikowane Charge Tower Pro MPP 6000-S

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Bauhn Charge Tower Pro MPP 6000-S (1 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 9 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/1

CAUTION: Read all instructions and warnings prior to using this product. Improper use of this product may result in product damage, excess heat, toxic fumes, ¬ﬁre or explosion.

Product: Charge Tower Pro

Model: 54254/AT799

Input: 100-240V~50/60Hz 0.8A max

Output A & B: 5V 2.1A / RAPID CHARGE

Output C, D, E & F: 5V 1A / TRICKLE CHARGE

Output Current: 7.1A max

IMPORTANT SAFETY INSTRUCTIONS – SAVE THESE INSTRUCTIONS

DANGER – TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, CAREFULLY FOLLOW THESE INSTRUCTIONS

1. Caution: Risk of electric shock. Grounding continuity must be maintained.

2. For connection to a supply not in the U.S.A., use an attachment plug adapter of the proper conﬁguration for the power outlet, if needed.

3. For indoor use only.

4. Please check prior use, if output voltage and current of the power supply is suitable for the product.

5. The plug is used as disconnect device. The socket-outlet shall be installed near the equipment and shall be easily accessible.

6. The cover may under no circumstances be opened. If the cover is damaged, then the power supply may no longer be used.

7. Children should be supervised to ensure that they do not play with the appliance.

Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modiﬁcations to this

unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause

harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the

equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet