Instrukcja obsługi Bauhn APVK-1224

Bauhn głośnik APVK-1224

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Bauhn APVK-1224 (2 stron) w kategorii głośnik. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/2
Control and Buttons
Have you got everything?
A. Switch between phone/camera mode
B. USB-C charging port
C. Button: increase brightness
D. Charging LED Indicator
E. Button: decrease brightness
F. On/Off Switch: slide to switch the LED
video light unit on/off
Condenser
Microphone LED Video Light Bluetooth®
Remote
A. Foldable Tripod
B. Condenser Microphone
C. LED Video Light
D. Bluetooth® Remote
E. AAA Activ Energy Battery
F. Phone Holder
G. USB-C Charging Cable
H. User Guide
I. Warranty Certicate
User Guide
Model: APVK-1224
Portable Phone Vlogging Kit
A B C D E F G H I J K L
G. Mode Button: change brightness setting
H. Power LED Indicator
I. Power Button: press to turn the light on/off
J. LED Light Indicator
K. Capture Button
L. On/Off Switch: slide to turn the remote on/off
Operation
Setting Up
• Set up the tripod to the desired height using the
adjustment locks.
• Screw the phone holder onto the tripod as illustrated,
ensuring it is securely screwed in.
• Extend the phone holder and slide your phone in. The
phone holder will automatically lock and hold you phone
in place.
• Slide the condenser microphone into the LED video light
to securely lock it in place.
• Once the condenser microphone and LED video light are
connected, slide it onto the phone holder as illustrated,
ensuring it is securely locked in.
• Use the handle on the tripod to adjust the angle of your
photo/video.
Using The Condenser Microphone
• Connect the condenser microphones 3.5mm audio cable
to your phones earphone port.
• Slide to switch up for phone mode. Slide the switch down
for camera mode (you camera must support the 3.5mm
MIC input.
• Note: you will need to buy a lighting to 3.5mm adaptor for
iOS smart phones that do not have an earphone port.
Using The LED Video Light
• Slide the On/Off switch to On to turn the LED video light
unit on. The power LED indicator will light up blue.
• Press the Power button to turn the light on/off. The power
LED indicator will turn off once the video light is on. Press
again to turn off the light and the power LED indicator will
light up blue again.
• Use the / buttons to adjust the brightness level.
• Press the Mode button to change brightness settings.
• Slide the On/Off switch to Off to turn the LED video light
unit off. The power LED indicator will also turn off.
Using The Remote
• Slide the On/Off switch to turn the remote on until the LED
indicator starts ashing.
• Turn on your phones Bluetooth
® and select “SeleCom” from
the list of found devices. Once connected, the LED indicator
will stop ashing. (The remote will automatically turn off after 5
minutes if not paired).
• Press the capture button to remotely take a picture.
• Slide the On/Off switch again to turn the remote off.
Charging
• LED Video Light: Connect the supplied USB-C charging cable to
the USB-C port on the LED video light. The charging LED indicator
will light up red. Once fully charged, the charging LED indicator will
light up green.
• Remote: Connect the supplied USB-C charging cable to the USB-C
port on the remote. The charging LED indicator will light up red.
Once fully charged, the charging LED indicator will turn off.
ABC
DE
FG
I
H
Specications
Input 5V, 7W
Battery Li-ion 3.7V, 2000mAh
Dimensions 88 x 75 x 30 mm
Weight 102g
Input 5V, 0.5A
Battery Li-ion 3.7V, 55mAh
Height 102cm (approx.)
Weight 325g (approx.)
Dimensions 135 x 53 x 35 mm
Weight 40g
General Safety Warnings
For the safety of yourself and others, follow all instructions and take notice of all the warnings. When
adhered to, these safety precautions can reduce the risk of fire, electric shock and injury.
This product complies with Australian Safety standard AS/NZS 62368.1 to ensure the safety of the product.
The RCM is a visible indication of a product’s compliance with all applicable ACMA
regulatory arrangements, including all technical and record-keeping requirements.
IMPORTANT
Plastic wrapping can be a suffocation hazard for
babies and young children, so ensure all packaging
materials are out of their reach.
To prevent environmental factors (dampness, dust,
food, liquid etc.) harming the power bank, only use it
in a well-ventilated, clean and dry environment, away
from excessive heat or moisture.
Keep the product away from direct sunlight or heat
sources.
In case of damage, do not disassemble, repair or
modify the product yourself. Contact After Sales
Support for advice on repair or replacement, or refer
servicing to qualified personnel only.
Children should be supervised to ensure they do not
play with the product.
Do not put any object on top of the product.
Do not place or store appliance where it can fall or
be pulled into a bath or sink.
This product is not intended for use by persons
(including children) with reduced physical, sensory
or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision
or instruction concerning use of the product by a
person responsible for their safety.
Do not expose the product to microwaves.
Clean using a dry cloth only.
Do not use water or chemicals.
Keep the product away from oils, chemicals or any
other organic liquids.
Use this appliance only for its intended purpose as
described in this guide.
Responsible disposal of the packaging
The packaging of your product has been selected
from environmentally friendly materials and can
usually be recycled. Please ensure these are disposed
of correctly. Plastic wrapping can be a suffocation
hazard for babies and young children, please ensure
all packaging materials are out of reach and are
safely disposed of. Please recycle these materials
rather than throwing them away.
Responsible disposal of the product
At the end of its working life, do not throw this
product out with your household rubbish. An
environmentally friendly method of disposal will
ensure that valuable raw materials can be recycled.
Electrical and electronic items contain materials
and substances which, if handled or disposed of
incorrectly, could potentially be hazardous to the
environment and human health.
Enjoy using your product!
Well done, you made it.
Now sit back and relax... your product is automatically covered by a 1-year warranty.
How nice!
Give us a call
What? You mean this User Guide didn’t have ALL the answers? Speak to us!
We’d love to help you get up and running as quickly as possible.
Call our on . After Sales Support 1300 002 534
Operating hours: Monday-Friday, 8:30am-6pm; Saturday, 9am-6pm AEST
Troubleshooting
Remote is not
working
• Check that the smart phone is paired with the remote.
• For Android devices, go to your camera settings and set your volume
key as the capture function.
• The remote control will automatically power off after 10 minutes of
inactivity. Press and hold the capture button to turn the remote on again.
• Charge the remote using the supplied USB-C cable for 2 hours.
Condenser
Microphone not
working
• Check that the switch is on the appropriate mode (phone/camera).
• Check whether your smart phone/camera supports the microphone
power. Insert the supplied AAA battery inside the Microphone battery
slot if your smart phone/camera does not support.
• For iOS smart phones that do not have earphones, you will need a
lightning to 3.5mm adaptor (not included).
LED video light
not working
• Charge the LED video light using the supplied USB-C cable for 4 hours.
• Slide the On/Off switch to On to turn the power on.
• Press the Power button to turn the video light on.
LED Video Light
Remote
Tripod Stand
Condenser Microphone

Specyfikacje produktu

Marka: Bauhn
Kategoria: głośnik
Model: APVK-1224

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Bauhn APVK-1224, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje głośnik Bauhn

Bauhn

Bauhn APMP-1224 Instrukcja

7 Stycznia 2025
Bauhn

Bauhn APVK-1224 Instrukcja

7 Stycznia 2025
Bauhn

Bauhn ABGSS-1223 Instrukcja

3 Stycznia 2025
Bauhn

Bauhn APPS-0724 Instrukcja

15 Października 2024

Instrukcje głośnik

Najnowsze instrukcje dla głośnik

Lamax

Lamax CyberWave1 Instrukcja

8 Stycznia 2025
Lamax

Lamax PartyKing1 Play Instrukcja

8 Stycznia 2025
Lamax

Lamax StarCube1 Instrukcja

8 Stycznia 2025
Lamax

Lamax Waver1 Instrukcja

8 Stycznia 2025
Majority

Majority P500 Instrukcja

8 Stycznia 2025
GMB Audio

GMB Audio SPK-BT-LED-01 Instrukcja

8 Stycznia 2025
GMB Audio

GMB Audio SPK-BTOD-01 Instrukcja

8 Stycznia 2025
MB

MB PS61 Instrukcja

8 Stycznia 2025
Definitive Technology

Definitive Technology Dymension LS-400 Instrukcja

8 Stycznia 2025
Definitive Technology

Definitive Technology Dymension Outdoor LS- Instrukcja

8 Stycznia 2025