Instrukcja obsługi Barska BQ13374

Barska Lornetka BQ13374

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Barska BQ13374 (4 stron) w kategorii Lornetka. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/4
1 YEAR LIMITED WARRANTY
NIGHT VISION BINOCULAR
BARSKA® Optics, as manufacturer, warrants this new precision optical product
to be free of original defects in materials and/or workmanship for the length of
time specied by this warranty. This warranty does not include damage caused
by abuse, improper handling, installation, maintenance, normal wear-and-tear,
unauthorized repairs or modications and tampering in anyway.
This warranty is limited to the original purchaser and is not transferable. This
warranty applies only to products purchased in the United States of America and
Canada.
In the event of a defect within 30 days, the consumer must return the defective unit
to the BARSKA dealer (the place of purchase) at his/her own expense.
Beyond 30 days, BARSKA products should be sent to the following address
for warranty repairs. Products must be packed carefully and sturdily to prevent
damage in transit, and returned freight prepaid to:
BARSKA® OPTICS
Repair Department
855 Towne Center Drive
Pomona, CA 91767
For additional and updated information
please visit our website at www.barska.com
Please email info@barska.com or call 1-888-666-6769 for Return Merchandise
Number (RMA#) before any returns.
NOTE: All merchandise received without a valid RMA # will be returned to shipper
at his/her own expense.
Please include all of the following when returning BARSKA products for service
and/or replacement:
1. Please write your complete details (Name, Address, Telephone #, E-mail
address, RMA#, etc.)
2. Purchase receipt or Proof of Purchase. (Original/Copy)
3. A brief explanation of the defect.
4. A Check/Money Order of $25.00 to cover inspection, shipping and handling.
*Please allow 6-8 weeks for delivery.
This product will either be replaced or repaired at the discretion of the warrantor.
If i’s a discontinued item, we will replace the product with an equivalent product.
Should the repair not be covered by this warranty, an estimate will be sent for your
approval. Non-warranty repairs or refurbishing of your optical products are always
provided at a reasonable cost.
BARSKA® Optics shall not be liable for any consequential, incidental and/
or contingent damages whatsoever. We will not pay shipping, insurance or
transportation charges from you to us, or any import fees, duties and or taxes. This
warranty supersedes all previous BARSKA® Optics warranties.
©2019 BARSKA ® 5/19
www.barska.com
BC609 5/19
NVX300
Night Vision Binocular
2 3
www.barska.comwww.barska.com
General Overview
1. Power: Long press for power on and off
2. Zoom: Under Menu mode: Press Zoom to go up.
Under Photo and Video Mode, press Zoom to zoom in at multiple levels. The
maximum zoom is 2X.
Once reaching 2X, keep pressing to go back to 1X
(1.0->1.07->1.14->1.22->1.30->1.38->1.48->1.58->1.68->1.79->1.92->
2.0->1.0)
3. Mode: Press Mode to change to the next mode.
Press to ick between 4 modes: Photo, Video, Gallery, and Setting
4. IR: Under Menu mode: Press IR to go down.
Under Photo and Video Mode: Press IR for 7 levels of brightness
(0->IR1->IR2->IR3->IR4->IR5->IR6->IR7->0….) when using the
Binocular at night.
5. OK:
- In Photo mode, OK takes a photo
- In Video mode, OK starts and stop the video recording
- In Gallery / Setting mode, press OK to select options – for example, start
playing a recorded video or to select an option from the menu.
6. Intensity. Pop up TFT backlight adjusting bar for easy adjusting the TFT
brightness. Use Zoom and IR button to increase/decrease the TFT brightness.
Press OK to save
6
5
4
1
3
2
8
7
9
10 11
Table Of Contents
General Overview 3
Using The Night Vision Binocular 4
Display Information 5
Taking Pictures And Videos 5
Setting Menu Navigation 5
Downloading Footage To Your PC 6
Viewing Footage On The Night Vision Binocular 7
Troubleshooting 7
Specication 7
4 5
www.barska.comwww.barska.com
7. Focus Adjustment: Focus the picture by turning the focus wheel clockwise
or anti-clockwise
8. IR LED
9. Lens cap: Take off for night-time use. Failure to do so will result in severely
limited performance.
(Note: Uncovering the lid during the day time will NOT damage the lens, but it
will affect the image quality.)
10. TF card and USB slot: These are located just above the eyepiece. First make
sure the power is off. Then push the card into the slot to lock it. To remove
the card, rst turn off device then push it in to release. When the card is
partially ejected, pull it out.
11. Eyepiece
Using The Night Vision Binocular
1. Turn the night vision by press the ON button down for a short period.
2. Pick an infrared power level by pressing the IR button to illuminate at night.
There are 3 brightness setting. A higher setting will provide a brighter picture,
but will deplete the batteries quicker.
3. Focus the picture by turning the focus wheel clockwise or anti-clockwise
4. You can use digital zoom to increase the zoom ratio more by press the Zoom
button to magnify the picture from 1.0x->1.07->1.14…to 2.0x then will go back
to 1x magnication.
5. When need, adjusting the LCD brightness level by press down the INTEN
button. Operating night vision at night may have LCD brightness to bright
issue, use intensity button for adjusting LCD brightness easily.
6. Press the Mode button to switch modes - the night vision four modes are
Photo, Video, Gallery and Setting. These are explained in the next sections.
Display information
1. Photo/Video mode icon
2. IR level Indication
3. No. of photos taken
4. TF card insert indication
5. Zoom Ratio indication
6. Battery level indicator
Taking Pictures And Videos
1. To take a picture: go to Photo mode (this is the default mode when the night
vision is switched on.) A camera icon shows at the bottom of the screen. To
take a photo, press the OK button.
2. To record a video: go to Video mode. A small video icon will appear at the
bottom of the screen. To start recording, press the OK button. To stop
recording, press the OK button again. Video will save automatically onto the
Micro SD memory card.
Setting Menu Navigation


Specyfikacje produktu

Marka: Barska
Kategoria: Lornetka
Model: BQ13374

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Barska BQ13374, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Lornetka Barska

Barska

Barska X-Trail Instrukcja

26 Września 2024
Barska

Barska Crossover Instrukcja

26 Września 2024
Barska

Barska AB12804 Instrukcja

26 Września 2024
Barska

Barska Colorado Instrukcja

26 Września 2024
Barska

Barska Escape Instrukcja

26 Września 2024
Barska

Barska Trend Instrukcja

26 Września 2024
Barska

Barska AB12802 Instrukcja

26 Września 2024
Barska

Barska Level Instrukcja

26 Września 2024
Barska

Barska Blackhawk Instrukcja

26 Września 2024
Barska

Barska Gladiator Instrukcja

26 Września 2024

Instrukcje Lornetka

Najnowsze instrukcje dla Lornetka

Pentax

Pentax 7x20 DCF Instrukcja

15 Października 2024
Auriol

Auriol Z31117 Instrukcja

12 Października 2024
Armasight

Armasight 8x36 Instrukcja

10 Października 2024
Kodak

Kodak BCS400 Instrukcja

9 Października 2024
Kodak

Kodak BCS600 Instrukcja

9 Października 2024
Steiner

Steiner M1050 LRF Instrukcja

8 Października 2024
Steiner

Steiner HX 10x42 Instrukcja

8 Października 2024