Instrukcja obsługi Barska BA12198

Barska Flesz BA12198

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Barska BA12198 (1 stron) w kategorii Flesz. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/1

· 3 levels of brightness

· Strobe mode

· S.O.S. light pattern

- Three 18650 rechargeable batteries

- Dual battery charger

- Extension tube

- Holster

Features Includes

1 YEAR LIMITED WARRANTY

BARSKA® Optics, as manufacturer, warrants this new precision optical product to

be free of original defects in materials and/or workmanship for the length of time

specified by this warranty. This warranty does not include damage caused by

abuse, improper handling, installation, maintenance, normal wear-and-tear,

unauthorized repairs or modifications and tampering in anyway.

This warranty is limited to the original purchaser and is not transferable. This

warranty applies only to products purchased in the United States of America and

Canada.

In the event of a defect within 30 days, the consumer must return the defective unit

to the BARSKA dealer (the place of purchase) at his/her own expense.

Beyond 30 days, BARSKA products should be sent to the following address for

warranty repairs. Products must be packed carefully and sturdily to prevent

damage in transit, and returned freight prepaid to:

BARSKA® OPTICS

855 Towne Center Drive

Pomona, CA 91767

For additional and updated information please visit our website at www.barska.com

Please email info@barska.com or call 1-888-666-6769 for Return Merchandise

Number (RMA#) before any returns.

NOTE: All merchandise received without a valid RMA # will be returned to shipper

at his/her own expense.

Please include all of the following when returning BARSKA products for service

and/or replacement:

1. Please write your complete details (Name, Address, Telephone #, E-mail

address, RMA#, etc.)

2. Purchase receipt or Proof of Purchase. (Original/Copy)

3. A brief explanation of the defect.

4. A Check/Money Order of $25.00 to cover inspection, shipping and handling.

*Please allow 6-8 weeks for delivery.

This product will either be replaced or repaired at the discretion of the warrantor. If

it's a discontinued item, we will replace the product with an equivalent product.

Should the repair not be covered by this warranty, an estimate will be sent for your

approval. Non-warranty repairs or refurbishing of your optical products are always

provided at a reasonable cost.

BARSKA® Optics shall not be liable for any consequential, incidental and/or

contingent damages whatsoever. We will not pay shipping, insurance or

transportation charges from you to us, or any import fees, duties and or taxes. This

warranty supersedes all previous BARSKA® Optics warranties.

FLX High Powered Flashlight

Battery Continuous Run Times

High Power: 60 Minutes

Med Power: 3 Hours

Low Power: 7 Hours

2000 LUMEN

CHARGING BATTERIES

1. Remove batteries and charger from packaging

2. Plug the charger into an electrical outlet and insert the

batteries into the battery slots and be sure to note the polarity

of each of the batteries

3. Batteries will be fully charged when both indicator lights are

blue. Disconnect the charger from the electrical socket and

remove batteries

NOTE

- Recharge batteries after

continuous use of flashlight,

see chart

- Recharge batteries if

flashlight turns off by itself

after a short time period

before using the flashlight again

- Charge time of depleted battery: approximately 4 hours to

fully charge

- Batteries have 800 rechargeable cycles

- DO NOT charge any other batteries other than 18650

type batteries

- 3 month warranty on rechargeable batteries

OPERATION

1. Once batteries have been fully charged insert batteries into

flashlight by unscrewing tail cap of flashlight light with the

batteries positive end first. Screw tail cap back onto

the flashlight.

2. To turn flashlight on, press and hold button firmly. You will

hear a click. Flashlight is on and is at the highest setting

3. To switch through the various lighting modes gently press

the button. Lighting modes are as follows;

- Tap once Medium Lighting Mode

- Tap once Low Lighting Mode

- Tap once more Strobe Mode

- Tap once more S.O.S. Light Pattern Mode

(3 short bursts, 3 long flashes, 3 short bursts)

- Tap once more High Lighting Mode

4. To turn flashlight off at any of the lighting modes press and

hold button firmly. You will hear a click and flashlight

is now off

NOTE

- Once flashlight is off, and turned back on it retains memory

from previously used mode

- When adding the extension to the flashlight, an additional

battery is required to operate the flashlight

- When not in use store flashlight and accessories in a cool

dry environment away from moisture

WARNING: USE OF

FLASHLIGHT FOR AN

EXTENSIVE PERIOD OF

TIME WILL CAUSE

OVERHEATING. IF

OVERHEATING OCCURS, TURN

FLASHLIGHT OFF AND ALLOW IT TO

COOL BEFORE RE-USING.

Specyfikacje produktu

Marka:	Barska
Kategoria:	Flesz
Model:	BA12198

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Barska BA12198, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje Flesz Barska

Barska BA11403 Instrukcja

26 Września 2024

Barska BA12198 Instrukcja

26 Września 2024

Instrukcje Flesz

Najnowsze instrukcje dla Flesz

Ledlenser P9R Core LEP Instrukcja

15 Października 2024

LED Lenser P5R Instrukcja

11 Października 2024

Brennenstuhl TL 1201 AF Instrukcja

9 Października 2024

Brennenstuhl TL 601 AF Instrukcja

9 Października 2024

Klein Tools KHH56308 Instrukcja

9 Października 2024

Brennenstuhl HL 400 AC Instrukcja

9 Października 2024

Nitecore MH40 Pro Instrukcja

8 Października 2024

Nitecore HU2000 Instrukcja

8 Października 2024

AccuLux UniLux PRO Instrukcja

8 Października 2024

AccuLux SL6 LED Instrukcja

8 Października 2024