Instrukcja obsługi Barska BA12196

Barska Niesklasyfikowane BA12196

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Barska BA12196 (1 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/1

· 3 levels of brightness

· Strobe mode

· S.O.S. light pattern

- One 18650

rechargeable battery

- Battery charger

- Holster

Features Includes

800 LUMEN

Battery Continuous Run Times

High Power: 3 Hours

Med Power: 7 Hours

Low Power: 10 Hours

BC360

WARNING: USE OF FLASHLIGHT FOR AN EXTENSIVE

PERIOD OF TIME WILL CAUSE OVERHEATING. IF

OVERHEATING OCCURS, TURN FLASHLIGHT OFF

AND ALLOW IT TO COOL BEFORE RE-USING.

- Flashlight Clip

- Flashlight Strap

- Pressure Switch

- Mounting Ring

CHARGING BATTERY

1. Remove battery and charger from packaging

2. Plug the charger into an electrical outlet and insert the battery into the

battery slot and be sure to note the polarity

3. Battery will be fully charged when indicator light is green. Disconnect the

charger from the electrical socket and remove battery

NOTE

- Recharge battery after continuous use

of flashlight, see chart

- Recharge battery if flashlight turns off by

itself after a short time period before

using the flashlight again

- Charge time of depleted battery: approximately 4 hours to fully charge

- Battery has 800 rechargeable cycles

- DO NOT charge any other battery other than 18650 type battery

- 3 month warranty on rechargeable battery

OPERATION

1. Once battery has been fully charged insert battery into flashlight by

unscrewing tail cap of flashlight light with the battery positive end first.

Screw tail cap back onto the flashlight.

2. To turn flashlight on, press and hold button firmly. You will hear a click.

Flashlight is on and is at the Highest setting.

3. To switch through the various lighting modes gently press the button.

Lighting modes are as follows;

- Tap once Medium Lighting Mode

- Tap once more Low Lighting Mode

- Tap once more Rapid Strobe Mode

- Tap once more S.O.S. Light Pattern Mode

(3 short bursts, 3 long flashes, 3 short bursts)

- Tap once more High Lighting Mode

4. To turn flashlight off at any of the lighting modes press and hold button firmly.

You will hear a click. Flashlight is now off.

USING THE MOMENTARY CABLE SWITCH

1. To add the momentary on/off long cable switch onto flashlight, unscrew

the tail cap of flashlight and set aside.

2. While keeping the battery in the flashlight, screw the momentary on/off

long cable switch on to the flashlight.

3. To switch through the various lighting modes hold down the button of the

cable switch. Lighting modes are as follows;

- Hold down cable button flashlight is at the Highest Lighting Mode

- Hold down cable button again for Medium Lighting Mode

- Hold down cable button again for Low Lighting Mode

- Hold down cable button again for Rapid Strobe Mode

- Hold down cable button again for S.O.S. Light Pattern Mode

- Hold down cable button again for High Lighting Mode

4. To turn flashlight off at any of the lighting modes, release the cable

switch button.

5. To remove the momentary on/off long cable switch, unscrew the long cable

switch from flashlight and set aside. While keeping battery in the flashlight,

screw the tail cap on to the flashlight.

MOUNTING FLASHLIGHT

1. With an Allen wrench loosen the top screws of the ring and carefully separate

the top piece of ring from the bottom half.

2. Position the tube of the flashlight in the groove of the bottom half of the ring.

3. Place the top piece of ring with screws over the top of the flashlight and

bottom half of flashlight.

4. With an Allen wrench tighten screws to join the top and bottom halves of the

ring together. Your flashlight is ready to be mounted to a firearm.

5. Loosen the lock nut located on the side of the ring, mount ring with flashlight

using the grooves of the ring to the rail of the firearm and tighten the lock nut

in place.

6. To dismantle mounted flashlight, loosen lock nut and remove mounted

flashlight from the rail of firearm. Using an Allen wrench unscrew the screws

from the top of the ring and remove flashlight from ring. Place top half of ring

on top of the bottom half of the ring and screw pieces back together.

1 YEAR LIMITED WARRANTY

BARSKA® Optics, as manufacturer, warrants this new precision optical product to be free of original

defects in materials and/or workmanship for the length of time specified by this warranty. This

warranty does not include damage caused by abuse, improper handling, installation, maintenance,

normal wear-and-tear, unauthorized repairs or modifications and tampering in anyway.

This warranty is limited to the original purchaser and is not transferable. This warranty applies only to

products purchased in the United States of America and Canada.

In the event of a defect within 30 days, the consumer must return the defective unit to the BARSKA

dealer (the place of purchase) at his/her own expense.

Beyond 30 days, BARSKA products should be sent to the following address for warranty repairs.

Products must be packed carefully and sturdily to prevent damage in transit, and returned freight

prepaid to:

BARSKA® OPTICS

855 Towne Center Drive

Pomona, CA 91767

For additional and updated information please visit our website at www.barska.com

Please email info@barska.com or call 1-888-666-6769 for Return Merchandise Number (RMA#)

before any returns.

NOTE: All merchandise received without a valid RMA # will be returned to shipper at his/her own

expense.

Please include all of the following when returning BARSKA products for service and/or replacement:

1. Please write your complete details (Name, Address, Telephone #, E-mail address, RMA#, etc.)

2. Purchase receipt or Proof of Purchase. (Original/Copy)

3. A brief explanation of the defect.

4. A Check/Money Order of $25.00 to cover inspection, shipping and handling.

*Please allow 6-8 weeks for delivery.

This product will either be replaced or repaired at the discretion of the warrantor. If it's a discontinued

item, we will replace the product with an equivalent product. Should the repair not be covered by this

warranty, an estimate will be sent for your approval. Non-warranty repairs or refurbishing of your

optical products are always provided at a reasonable cost.

BARSKA® Optics shall not be liable for any consequential, incidental and/or contingent damages

whatsoever. We will not pay shipping, insurance or transportation charges from you to us, or any

import fees, duties and or taxes. This warranty supersedes all previous BARSKA® Optics

warranties.

FLX High Powered Flashlight

Specyfikacje produktu

Marka:	Barska
Kategoria:	Niesklasyfikowane
Model:	BA12196

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Barska BA12196, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje Niesklasyfikowane Barska

Barska BA11497 Instrukcja

26 Września 2024

Barska BA12196 Instrukcja

26 Września 2024

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane

Black Diamond BD1121530000ALL1 Instrukcja

15 Października 2024

Husqvarna K 970 SmartGuard Instrukcja

15 Października 2024

Stihl HT 70 Instrukcja

15 Października 2024

Ernesto H14270 Instrukcja

15 Października 2024

Uniden BT MIC KIT Instrukcja

15 Października 2024

Vaude Omnis Bike 26 Instrukcja

15 Października 2024

ART ProChannel II Instrukcja

15 Października 2024

Aukey DR02J Instrukcja

15 Października 2024

Master Lock 653EURD Instrukcja

15 Października 2024

Roland FR-18 Diatonic Instrukcja

15 Października 2024