Instrukcja obsługi Barefoot Sound MicroMain 45

Barefoot Sound Speaker MicroMain 45

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Barefoot Sound MicroMain 45 (18 stron) w kategorii Speaker. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/18
Manual
Contents Section start page
Description 1.0 01
Warnings! (please read carefully) 2.0 02
Inputs and Controls 3.0 03
Startup 4.0 03
Signal Flow Diagram 5.0 04
Protection 6.0 05
Positioning 7.0 05
Equalization 8.0 09
Maintenance 9.0 10
Frequency Response 10.0 11
Specifications 11.0 13
Drawings 12.0 14
Warranty 13.0 16
1
1.0 Descripon
The MicroMain45 is a 3 way acve loudspeaker capable of neareld, and mid eld operaon. The four drive - -
units are all housed in sealed enclosures. The DSP controlled three way power amplier module can deliver 350 -
Was connuously.
2.0
The Mains Voltage Select switch (VAC Select) on the rear panel must be in the 230V posion for AC
power line voltages over 132 VAC. Connecng the power cord to AC power line voltages over 132 VAC
while the VAC Select switch is in the 115V posion will damage the amplier. Such damage is NOT
covered under warranty.
Rear panel VAC Select switch locaon
2
Please read and follow the safety informaon below:
Do not remove the rear amplier panel. There is a risk of electric shock. No user serviceable parts
are inside. Please refer service issues to a qualied technician.
Do not operate this device with an ungrounded mains power cable or a mains connecon that is
ungrounded. This may result in personal injury.
Do not place open ames such as lighted candles on or near this device .
Do not expose this device to water, rain or high humidity. Do not place objects lled with liquids,
such as vases, on or near this device.
This speaker requires adequate airow to maintain proper cooling. Do not obstruct airow
around the speaker. Do not run the speaker upside down (mains power connector on top).
Do not operate this device in ambient temperatures above 30°C (85°F). Over temperature may -
cause device failure.
Cauon! This speaker is capable of producing sound pressure levels in excess of 85dB which may
cause permanent hearing damage. Always verify that input signal levels are aenuated before
powering on the speaker.

Specyfikacje produktu

Marka: Barefoot Sound
Kategoria: Speaker
Model: MicroMain 45

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Barefoot Sound MicroMain 45, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Speaker Barefoot Sound

Instrukcje Speaker

Najnowsze instrukcje dla Speaker

Mission

Mission ZX-5 Instrukcja

1 Października 2024
Audibax

Audibax Party 12 Instrukcja

1 Października 2024
Audibax

Audibax Ground 6T Instrukcja

1 Października 2024
Meridian

Meridian DSP7200 S Instrukcja

1 Października 2024
DAP-Audio

DAP-Audio CS-36 Instrukcja

1 Października 2024
Mission

Mission ZX-1 Instrukcja

1 Października 2024
Audibax

Audibax PR42T Instrukcja

1 Października 2024