Instrukcja obsługi Azden SGM-250H

Azden mikrofon SGM-250H

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Azden SGM-250H (2 stron) w kategorii mikrofon. Ta instrukcja była pomocna dla 10 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/2
Azden Two Year Limited Warranty
Azden Corporation warrants, to the first purchaser, that the Azden brand product purchased is free from
defects in material and workmanship. Azden’s sole obligation under this warranty shall be to provide,
without charge, repair or replacement (at Azden’s sole discretion), within two years from the date of
purchase. A dated receipt is required to establish the date of purchase and no registration is necessary to
receive warranty service under this two year limited warranty. The cost to ship a failed product to and from
Azden or to its dealer shall not be covered by this warranty.
This warranty is the sole and exclusive express warranty given with respect to the product and all other
warranties, expressed or implied, are herby excluded. Neither Azden, nor the dealer who sells this
product, is responsible for indirect, incidental or consequential damages.
This warranty does not extend to any defect, malfunction or failure caused by misuse, abuse, accident,
act of God, faulty hookup, unauthorized modification, connecting this product to equipment for which this
product is not intended or defective associated equipment.
Congratulations on your purchase of the
Azden SGM-250H Professional
Hypercardioid Shotgun Microphone.
All Azden products come with a two (2)
year limited warranty. The warranty for the
SGM-250H may be extended to ten (10)
years.
To obtain the 10 year warranty, please
register your microphone online at
warranty.azden.com/register* within 90
days from the date of purchase.
*Azden’s 10 year warranty is not available in all
countries and not all Azden products are eligible.
See www.azden.com for details.
REGISTER FOR THE
10 YEAR WARRANTY
Customers in the Asia and Oceania markets contact:
Azden Corp., 1-12-17 Kamirenjaku Mitaka-shi, Tokyo, 181-8533 Japan
Tel: +81-422-55-5115 (Japan) • Fax: +81-422-55-0131 (Japan)
www.azden.co.jp • email: sales@azden.co.jp
Customers in the North/South America and European markets contact:
Azden Corp., 200 Valley Road, Suite 101, Mt. Arlington, NJ 07856
Tel: +1-973-810-3070 • Fax: +1-973-810-3076
www.azden.com • email: sales@azden.com
Product Highlights
• Hypercardioid microphone element for maximum side rejection
• 50% longer interference tube further narrows directional pickup
• High sensitivity, low-noise condenser microphone element
• Wide frequency response for accurate audio capture
• Powered by 48 V phantom power
• Switchable low-cut filter at 75 Hz
• All-metal case for resistance to RF and durability
• Handcrafted in Japan with 10-year warranty after online registration
Included Accessories
English
CAUTION
Do not attempt to open the casing or make any modification to the internal electrical
components. Electric shock or injury may result. Any unauthorized modification to this
product will void all applicable warranties.
Do not store or operate this product near a heat source or in an environment of extreme
temperatures. Avoid exposure to rain or any other source of moisture. Do not submerge
in water. If exterior is exposed to water, wipe dry before use.
Please take the time to read this manual carefully and keep it for your reference.
High-quality foam windscreen
Microphone Clip
Owner’s Manual
SGM-250H
Leatherette zippered carrying pouch
Specifications
Freq. Response 20 Hz - 20 kHz
Low-Cut Filter Selectable @ 75 Hz / 3 dB per Octave
Polar Pattern Hypercardioid
Dynamic Range 114 dB
Sensitivity -35 dB
Impedance 100 Ohms
Max Input SPL 132 dB SPL (1 kHz @ 1% T.H.D.)
S/N Ratio 76 dB (1 kHz @ 1 Pa)
Power Requirement 11 - 50 V Phantom
Output Gold-plated 3-pin XLR
Dimensions 250 mm x Φ21 mm (9.84" x 0.83") (L x D)
Weight 110 g (3.9 oz)
Accessories mic clip, foam windscreen, carrying pouch
Polar Pattern
Frequency Response
Overview
The SGM-250H is a professional hypercardioid condenser shotgun
microphone intended for video production applications. As part of
Azden’s Ni-Go-Maru Series (250) microphones, you can expect
high-level performance, natural sound quality and excellent build
quality, all backed by one of the best product warranties in the industry:
a limited 10-Year Warranty against manufacturer defect (online
registration required).
The characteristics that set the SGM-250H apart from the rest of the
Ni-Go-Maru Series are its hypercardioid mic element and 50% longer
interference tube. Together, these design elements combine to create
a highly focused pick up pattern that’s more sensitive to on-axis sounds
and better at rejecting sound approaching from the sides.
This makes the SGM-250H well suited for recording in challenging
acoustic environments. Whether the space you’re in has a lot of
unavoidable background noise, or produces significant reverberation,
the SGM-250H will do a better job at isolating your speaking subject
and recording clear audio.
Low-Cut Filter Switch
When engaged, the low-cut filter switch (a.k.a. high-pass filter) will
attenuate frequencies below 75 Hz at the rate of -3 dB per octave. The
switch has two positions:
Low-Cut (ON)
Flat (OFF)
It is not recommended that you adjust the low-cut filter switch while
recording as doing so may produce an audible noise in your recording.
When to engage the Low-Cut Filter Switch?
It’s most likely best to leave the low-cut filter switch OFF unless your
recording environment is plagued with an unavoidable, low-frequency
noise. Fans, electric motors, HVAC systems, cars on a busy road and
wind are some examples of what can produce unwanted noise in the
lower frequency range. Bear in mind that a low-cut filter cannot totally
eliminate noise, but merely reduce it, which in turn can improve the
intelligibility of recorded speech.
Power
Phantom power is a DC voltage supplied through a balanced
microphone cable and used to power the electronics of the connected
microphone. Most professional cameras, mixers and audio interfaces
with microphone XLR preamps have the ability to supply phantom
power. If the equipment you use does not, you will have to utilize a
separate external phantom power supply.
Most commonly, phantom power is supplied at 48 volts. This is the
optimum voltage for the SGM-250H. It is possible that your connecting
equipment supplies a different voltage. This microphone is rated to
work on a voltage between 11 and 50 volts, however, performance will
degrade with lower voltages and damage to the electronics could result
when using voltages in excess of this range. It is recommended that
you consult the manuals of any equipment you intend to use with the
microphone beforehand. Please note that the warranty does not cover
damage caused by using phantom power beyond what the microphone
is rated for.
Connecting to Camera or Audio Recorder
To connect the SGM-250H to a camera or audio recording device, use
a high-quality, balanced XLR microphone cable (sold separately). Be
sure that phantom power is switched on for your mic input and be
aware that you may also need to adjust your camera’s or audio
device’s settings before signal from the microphone can be recorded.
XLR pin assignments
SGM-250H Professional Hypercardioid Shotgun Microphone
English
3 Pin XLR Male
Hot
Cold
Shield
21
3
+0
+20
+10
-10
-20
-30
100 1k 10k
-40
0°
90°
180°
［ ］ dB
［ Hz ］

Specyfikacje produktu

Marka: Azden
Kategoria: mikrofon
Model: SGM-250H

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Azden SGM-250H, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje mikrofon Azden

Azden

Azden SGM-250CX Instrukcja

6 Października 2024
Azden

Azden WMS-PRO Instrukcja

15 Września 2024
Azden

Azden PRO-XD Instrukcja

10 Września 2024
Azden

Azden 1201URX/SI Instrukcja

9 Września 2024
Azden

Azden WDL-PRO Instrukcja

5 Września 2024
Azden

Azden SMX-10 Instrukcja

3 Września 2024
Azden

Azden SGM-3500L Instrukcja

3 Września 2024
Azden

Azden SGM-3416L Instrukcja

1 Września 2024
Azden

Azden SGM-PII Instrukcja

31 Sierpnia 2024
Azden

Azden 1201XT Instrukcja

31 Sierpnia 2024

Instrukcje mikrofon

Najnowsze instrukcje dla mikrofon

Countryman

Countryman B6 Instrukcja

15 Stycznia 2025
Pyle

Pyle PMKSHUSB04 Instrukcja

15 Stycznia 2025
DJI

DJI Mic Mini Instrukcja

15 Stycznia 2025
Vonyx

Vonyx CMS320B Instrukcja

15 Stycznia 2025
BOYA

BOYA BY-PM700 Instrukcja

14 Stycznia 2025
Audio-Technica

Audio-Technica BP892xCW Instrukcja

13 Stycznia 2025
Sound Devices

Sound Devices Astral A20-HH Instrukcja

13 Stycznia 2025
HyperX

HyperX QuadCast S Instrukcja

12 Stycznia 2025
Schertler

Schertler STAT-C Instrukcja

11 Stycznia 2025
Shure

Shure SBC210LM Instrukcja

10 Stycznia 2025