Instrukcja obsługi Axton AXC25IX

Axton głośnik samochodowy AXC25IX

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Axton AXC25IX (16 stron) w kategorii głośnik samochodowy. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/16

EinbauanlEitung/installatiOn guiDE

COMPONENT

SYSTEMS

AXC26IX

AXC25IX

– 2 –

Thank you and congratulations on your purchase of this AXTON AXC 2-way component

system. This loudspeaker system exclusively uses very high quality parts and compon-

ents. As with all high-quality car audio components, professional installation is highly re-

commended. If you plan on installing this component system by yourself, please read the

following installation guide carefully, before you attempt the installation. You should retain

this manual, the packing and the purchasing receipt for future reference. For any further

information about mounting, connecting or adjusting this speaker system, please contact

your authorized AXTON dealer.

UNPACKING THE SYSTEM

Carefully remove the loudspeakers, crossovers and the accessories from the giftbox and

check whether all parts are in good undamaged condition, and match with the set

contents listed below:

n 2 AXC mid/woofers

n 2 grilles

n 2 AXC-T25 tweeters

n 2 inline crossovers with attached wires for tweeter and mid/woofer

n 1 set of tweeter & mid/woofer mounting hardware

n 1 instruction manual with warranty card

Please contact your authorized AXTON dealer if the content of this set is incomplete or

parts of it show signs of transport damage.

BEFORE YOU START

The rst step is to choose the most suitable or best sounding location for the speakers to

be installed. Keep in mind that the best looking spot might not be the one that gives you

best sound. The factory OEM speaker cutouts usually provide space and a stable platform

for fast and convenient mounting of new mid/woofer units. To use the OEM speaker

cutouts is highly advantageous in most cases and it will also prevent you from having to

cut new holes. For the tweeter mounting, some extra care to nd the best spots will

usually pay back in form of improved front staging or/and better resolution.

– 3 –

MOUNTING THE MID/WOOFERS

Remove the factory grilles of the door - or if necessary - the complete door panels. The

13 / 16.5 cm EURO-DIN frame mid/woofer units provide bolt and screw holes to t a great

variety of OEM standard patterns, making them ideal for a direct replacement of factory

installed speakers in European or Asian cars.

n Remove the factory installed mid/woofers or fullrange speakers. Before you attempt

to install the new AXTON mid/woofers, you must check the available installation depth

of the left and right front door. To do this, slide down both windows and hold the AXTON

mid/woofers in place to reassure the available installation depth does sufce. This test is

important, failure to do this may let you end up with an impaired window function!

n Look out for a good location to mount the crossovers. Consider that the x-overs should

remain accessible for tweeter level adjustment after the installation of the speakers is com-

pleted. Potential places to mount your x-overs are under the dashboard, inside the doors,

and so on.

n Connect the crossover wires to the blade connector terminals of the mid/woofer units.

n Check that there are no gaps between the speakers and the mounting surface in the

doors. Note that some (newer) cars will require the use of car-specic mounting adapters

made of pastic material. Without them, the Euro-DIN mid/woofers will not t to the OEM

cutout, or the available installation depth will not be sufcient. Such adapters are usually

available from your authorized AXTON dealer.

n The cone and surround material of the mid/woofers is 100% water proof. However a

direct exposure of the mid/woofer to water inside the doors should be avoided. In most

cases, protection foils are pre-installed to protect the OEM full-range speaker. Do not rip

this foil out of the doors, it is there for a purpose!

n Fix the mid/woofer to the speaker mounting hole using the provided screws. If the mid/

woofers are directly screwed onto the sheetmetal of the door, use the metal clips included

with the mounting hardware. You can now reinstall the factory plastic grilles, but make

sure the surrounds of the mid/woofers do not come in touch with plastic parts standing

off on the backside of the grilles.

n In case you have chosen a new location for your mid/woofers (other than factory

cut-out), use the speaker protection grilles. Just mount them on top of the mid/woofers.

Specyfikacje produktu

Marka:	Axton
Kategoria:	głośnik samochodowy
Model:	AXC25IX

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Axton AXC25IX, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje głośnik samochodowy Axton

Axton AB20A Instrukcja

22 Września 2024

Axton AXC25S Instrukcja

22 Września 2024

Axton AXC26 Instrukcja

20 Września 2024

Axton AC25SX Instrukcja

19 Września 2024

Axton AB25 Instrukcja

18 Września 2024

Axton AE652C Instrukcja

6 Sierpnia 2024

Axton AXC26S Instrukcja

6 Sierpnia 2024

Axton AXC25IX Instrukcja

6 Sierpnia 2024

Axton AB20 Instrukcja

6 Sierpnia 2024

Axton AE502C Instrukcja

6 Sierpnia 2024

Instrukcje głośnik samochodowy

Najnowsze instrukcje dla głośnik samochodowy

Sony XS-W104ES Instrukcja

13 Stycznia 2025

JL Audio C2-650 Instrukcja

11 Stycznia 2025

JBL P963 Instrukcja

31 Grudnia 2025

Hertz HEX 6.5 IC-W Instrukcja

31 Grudnia 2025

JL Audio Stealthbox SB-F-150-SPRCRW/13TW5v2/TN Instrukcja

30 Grudnia 2025

Kicker 51KST2504 Instrukcja

27 Grudnia 2024

Kicker 51KST2004 Instrukcja

27 Grudnia 2024

Infinity Kappa 680.9cs Instrukcja

26 Grudnia 2024

Infinity Kappa 680.7cs Instrukcja

26 Grudnia 2024

Infinity Reference 6830cs Instrukcja

26 Grudnia 2024