Instrukcja obsługi Axler CS-CF-30

Axler statyw CS-CF-30

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Axler CS-CF-30 (2 stron) w kategorii statyw. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/2

www.AxlerSupports.com

CS-CF-30

ONE-YEAR LIMITED WARRANTY

This Axler product is warranted to the original purchaser to be free

from defects in materials and workmanship under normal consumer

use for a period of one (1) year from the original purchase date or thirty

(30) days after replacement, whichever occurs later. The warranty

provider’s responsibility with respect to this limited warranty shall be

limited solely to repair or replacement, at the provider’s discretion, of

any product that fails during normal use of this product in its intended

manner and in its intended environment. Inoperability of the product or

part(s) shall be determined by the warranty provider. If the product has

been discontinued, the warranty provider reserves the right to replace

it with a model of equivalent quality and function.

This warranty does not cover damage or defect caused by misuse,

neglect, accident, alteration, abuse, improper installation or

maintenance. EXCEPT AS PROVIDED HEREIN, THE WARRANTY

PROVIDER MAKES NEITHER ANY EXPRESS WARRANTIES NOR ANY

IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO ANY IMPLIED

WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR

PURPOSE. This warranty provides you with speciﬁc legal rights, and

you may also have additional rights that vary from state to state.

To obtain warranty coverage, contact the Axler Customer Service

Department to obtain a return merchandise authorization (˝RMA˝)

number, and return the defective product to Axler along with the RMA

number and proof of purchase. Shipment of the defective product is at

the purchaser’s own risk and expense.

For more information or to arrange service, visit www.axlersupports.com

or call Customer Service at 212-594-2353.

Product warranty is provided by the Gradus Group.

www.gradusgroup.com

Axler is a registered trademark of the Gradus Group.

• Please read and follow these instructions, and keep this manual in a safe place.

• Keep this product away from children.

• Make sure everything is secure before proceeding.

• Make sure that this product is intact and that there are no missing parts.

• To avoid damage to this product, be careful not to overtighten or improperly

thread any of the threaded ﬁttings.

• Do not exceed the maximum load capacity.

• Be careful not to catch your ﬁngers in any of the moving parts.

• All images are for illustrative purposes only.

S l i d e r :

1. Feet (x6)

2. Light-stand mounting sockets (5/8")

3. Mounting cheese plate

(1/4"-20 and 3/8"-16 sockets)

4. Brake

5. Camera base

6. Bubble level

7. 3/8"-16 threaded mount

8. Wheels

9. Tripod mounting sockets

(1/4"-20 and 3/8"-16)

A l s o I n c l u d e d :

• Carry case

• User manual

O V E R V I E W

P R E C A U T I O N S

QUICK-START

GU IDE

GG1

M o un t i n g o n Tw o Tr i p o d s

1. Align the tripods’ threaded posts with the

corresponding 1/4˝-20 and 3/8˝-16 sockets

on each end of the slider (Fig. 3).

2. Screw in each tripod until secure.

Tip: It may be easier to turn the slider upside

down to screw in the tripods.

3. Using the bubble level on the camera base,

adjust the tripods to align the slider with

the horizon.

Note: The slider’s center feet can be removed for this

operation if they interfere with tripod mounting (Fig. 2).

M o un t i n g o n Tw o L i g h t S t a n d s

1. Locate the 5/8˝ mounting sockets

for standard light-stand spigots on

either end of the slider (Fig. 4).

2. Use a 4 mm hex key (not included)

to loosen the set screws on each

socket, and place the slider onto

the spigots.

3. Tighten the set screws until

secure.

4. Using the bubble level on the camera base, adjust

the light stands to align the slider with the

horizon.

M O U N T I N G Y O UR C A M E R A T O T H E S L ID E R

Important!

Before mounting your camera, lock down the camera

base by securing the brake.

1. Secure the slider on a stable, level surface or make

sure that the slider is securely mounted on the tripod.

2. Tighten the brake on the camera base.

M o u n t i n g o n O n e Tr i p o d

1. Center the camera base on the slider,

and lock it down with the brake (Fig. 1).

2. Align the appropriate mounting hole

on the bottom of the camera base

with the mounting post of the tripod,

and screw the tripod in (Fig. 2).

Tip: It may be easier to turn the slider

upside down to screw in the tripod.

Note: It is recommended to use the center

3/8˝-16 socket for the greatest balance

and stability. If your tripod has a 1/4˝-20

mounting post, use a 1/4˝ to 3/8˝ bushing

adapter (available separately) to attach the

slider.

3. Using the bubble level on the camera

base, adjust the tripod legs to align the

slider with the horizon.

Note: The slider’s center feet can be

removed for this operation if they interfere

with tripod mounting (Fig. 2).

U S I N G T H E S L I D E R

Once your camera is mounted, loosen

the brake and manually move your

camera along the slider. If the slider

is positioned at an incline, keep one

hand on the camera base before

loosening the brake (Fig. 6).

M O U N T I N G T HE C S - C F - 3 0

The CS-CF-30 can be mounted on a single tripod. For added stability, the

slider can be supported by two tripods or light stands.

Note: To avoid wobbling and camera shake, use sand bags or other weights

to stabilize your tripods or light stands.

T H A N K Y O U F O R C H O O S I N G A X L E R .

The Axler CS-CF-30 Camera Slider is a portable solution for capturing

tracking shots and push-ins that can add artistic and cinematic elements

to your video productions. With sturdy 15 mm carbon-ﬁber rods that

support up to 50 pounds, the slider is capable of accommodating large

video cameras and lenses as well as DSLR cameras. Precision-machined

aluminum wheels assure quiet and smooth tracking along the rails for

ﬂuid camera motion that a microphone won’t pick up. A brake lever is

conveniently located on the side of the base.

The aluminum camera base employs a 3/8˝-16 mounting stud for a video

head or ball head. A mounting cheese plate on the bottom of the base has

many 1/4˝ and 3/8˝ mounting sockets for adding lights, microphones, and

other accessories to your rig.

Fig. 1

Fig. 3

Fig. 6

Fig. 4

Fig. 2

Fig. 5

S P E C I F I C AT I O N S :

• Slide length: 3˝ (76.2 cm)

• Maximum load capacity (Freestanding): 50lbs (22.7 kg)

Note: When mounted on a tripod, the maximum load capacity

will depend on the weight capacity of the tripod.

• Mounting post: 3/8˝-16

• Tripod and accessory sockets: 1/4 -20 and 3/8˝ ˝-16

• Light stand mounting sockets: 5/8˝ (16 mm)

• Rod construction: Carbon ﬁber

• Dimensions (H ¬ W ¬ L): 2.75 ¬ 7 (7 ¬ 17.8 ¬ 80 cm)˝ ˝ ¬ 31.5˝

• Weight: 3.55 lb. (1.6 kg)

3. Rotate the tripod head clockwise

until it is ﬂush with the camera

platform and secure (Fig. 5).

Important!

DO NOT MOUNT THE TRIPOD

HEAD WHEN THE CAMERA IS

ATTACHED!

Mount the camera only once the tripod

head is secure on the camera platform.

Specyfikacje produktu

Marka:	Axler
Kategoria:	statyw
Model:	CS-CF-30

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Axler CS-CF-30, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje statyw Axler

Axler VM-2370CF/VH-12 Instrukcja

19 Grudnia 2024

Axler CS-CF-30LW Instrukcja

19 Grudnia 2024

Axler FCS-1428 Instrukcja

19 Grudnia 2024

Axler Robin 20S Instrukcja

19 Grudnia 2024

Axler Robin 05R V2 Instrukcja

19 Grudnia 2024

Axler CS-CPS-20A Instrukcja

19 Grudnia 2024

Axler CS-CF-30 Instrukcja

19 Grudnia 2024

Instrukcje statyw

Najnowsze instrukcje dla statyw

Magnus VPH-10 Instrukcja

19 Grudnia 2024

Ready Rig GS Instrukcja

18 Grudnia 2024

Rollei Rock Solid Beta 180 Carbon Instrukcja

14 Grudnia 2024

Omnitronic GBE-1 Instrukcja

14 Grudnia 2024

Robus Vantage Series 3 RCM-633 Instrukcja

13 Grudnia 2024

Oben CQL-13 Instrukcja

13 Grudnia 2024

Oben IBH-05 Instrukcja

13 Grudnia 2024

Robus RCMTT-1113 Instrukcja

13 Grudnia 2024

Oben GH3W-15 Instrukcja

13 Grudnia 2024

Robus RCTT-200 Instrukcja

13 Grudnia 2024