Instrukcja obsługi AV:link HQO201


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla AV:link HQO201 (2 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/2
HQO201
Single Arm Adjustable TV/Monitor Wall Mount Bracket
Item ref: 129.511UK
User Manual
Thank you for choosing the HQO201 bracket. This bracket is constructed from reinforced steel for mounting screen from 13” to 40” up to 15kg.
Designed to be easily installed and supplied with all required installation hardware.
Caution:
Please read this manual thoroughly to avoid damage to property or personnel. If unsure of any part of this manual please refer to professional installer
for help:
This product contains small components that could pose a choking hazard if swallowed, please keep out of reach of children.
This product is designed for mounting on wall studs or concrete wall. Always ensure the mounting surface will be capable of withstanding the
combined weight of the TV bracket and TV, reinforcement may be required for aged or weak walls.
Safety gear such as gloves and safety goggles must be worn during the installation. A minimum of two people are required throughout the
installation, failure to do so may result in injury or damage.
This product is design for indoor use only. The bracket must be inspected at least every two months for loose joints or aged parts.
Contents:
Please check all contents list below are included inside the box. If anything is missing please return to the retailer or dealer. ed
For this installation you will also require a pencil, tape measurer, electric drill, stud finder and a Philips (cross) screw driver.
Step 1 Fixing wall bracket
For concrete wall installation first of all work out the height of the installation and ensure it is level using the spirit level. Use a pencil to mark where the
mounting holes will be and use an electric drill to drill a hole that is around 10.5mm in diameter and 50mm deep. Insert the wall plugs into the holes
and install the wall bracket as follows.
129.511UK User Manual
For plaster wall installation first of all find out where the wood stud is behind the wall using a stud finder. Then work out the height of the installation
and ensure it is level using the spirit level. Use a pencil to mark where the mounting holes will be and use an electric drill to drill a hole that is around
4.5mm in diameter and 50mm deep. Install the wall bracket as follows.
Step 2 Fixing TV bracket to the screen, please use plastic spacer if the back of the screen is uneven.
For VESA sizes bigger than 100x100, the supplied adaptors may be used. Attach the VESA extension arms as shown below using M5 12mm screws and
nuts supplied.
Step 3 slide the TV with attached mount onto the wall bracket. Clip the secure latch on and screw down the locking screw using the supplied Allen
key. The tension of the pan can be adjusted with the Allen key as show below. Tuck all cables into the cable management hook at the bottom of the
bracket to finish the installation.
Errors and omissions excepted.
Copyrigh 2015. AVSL Group Ltd.


Specyfikacje produktu

Marka: AV:link
Kategoria: Niesklasyfikowane
Model: HQO201

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z AV:link HQO201, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Niesklasyfikowane AV:link

AV:link

AV:link TabC-L Instrukcja

4 Grudnia 2024
AV:link

AV:link HQS201 Instrukcja

17 Września 2024
AV:link

AV:link PS601 Instrukcja

16 Września 2024
AV:link

AV:link LPT1 Instrukcja

14 Września 2024
AV:link

AV:link USC601 Instrukcja

5 Września 2024
AV:link

AV:link TSL600 Instrukcja

1 Września 2024
AV:link

AV:link 180.265UK Instrukcja

1 Września 2024
AV:link

AV:link USC401 Instrukcja

1 Września 2024
AV:link

AV:link HQO201 Instrukcja

28 Sierpnia 2024
AV:link

AV:link ST201 Instrukcja

28 Sierpnia 2024

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane