Instrukcja obsługi Autel MaxiSys Ultra S2

Autel Nie skategoryzowane MaxiSys Ultra S2

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Autel MaxiSys Ultra S2 (4 stron) w kategorii Nie skategoryzowane. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/4
All information, specifications and illustrations in this manual are
based on the latest information available at the time of printing.
Autel reserves the right to make changes at any time without notice.
No part of this manual may be reproduced, stored in a retrieval
system or transmitted, in any form or by any means, electronic,
mechanical, photocopying, recording, or otherwise, without the
prior written permission of Autel.
Indicates a potentially hazardous situation which,
if not avoided, could result in death or serious injury to the
operator or to bystanders.
The safety messages herein cover situations Autel is aware
of. Autel cannot know, evaluate or advise you as to all of the
possible hazards. You must be certain that any condition or
service procedure encountered does not jeopardize your
personal safety.
When an engine is operating, keep the service
area WELL VENTILATED or attach a building exhaust
removal system to the engine exhaust system. Engines
produce carbon monoxide, an odorless, poisonous gas that
causes slower reaction time and can lead to serious
personal injury or loss of life.
Autel®, MaxiSys®, and MaxiDAS® are trademarks of Autel
Intelligent Technology Corp., Ltd., registered in China, the United
States and other countries. All other marks are trademarks or
registered trademarks of their respective holders.
For technical assistance in all other markets, please contact your
selling agent.
Safety messages are provided to help prevent personal injury and
equipment damage. All safety messages are introduced by a
signal word indicating the hazard level.
For your own safety and the safety of others, and to prevent
damage to the equipment and vehicles upon which it is used, it is
important that the safety instructions presented throughout this
manual be read and understood by all persons operating or
coming into contact with the equipment.
There are various procedures, techniques, tools, and parts for
servicing vehicles, as well as in the skill of the individual doing the
work. Because of the vast number of test applications and
variations in the products that can be tested with this instrument,
we cannot possibly anticipate or provide advice or safety
messages to cover every situation.
It is the automotive technician’s responsibility to be knowledgeable
of the system being tested. It is essential to use proper service
methods and test procedures. It is important to perform tests in
an appropriate and acceptable manner that does not endanger
your safety, the safety of others in the work area, the equipment
being used, or the vehicle being tested.
Before using the equipment, always refer to and follow the safety
messages and applicable test procedures provided by the
manufacturer of the vehicle or equipment being tested. Use the
equipment only as described in this manual. Read, understand,
and follow all safety messages and instructions in this manual.
Always perform automotive testing in a safe environment.
Wear safety eye protection that meets ANSI standards.
Indicates an imminently hazardous situation
which, if not avoided, could result in death or serious injury
to the operator or to bystanders.
Keep clothing, hair, hands, tools, test equipment, etc.
away from all moving or hot engine parts.
Operate the vehicle in a well ventilated work area, for
exhaust gases are poisonous.
Put the transmission in PARK (for automatic transmission)
or NEUTRAL (for manual transmission) and make sure the
parking brake is engaged.
Put blocks in front of the drive wheels and never leave the
vehicle unattended while testing.
Be extra cautious when working around the ignition coil,
distributor cap, ignition wires and spark plugs. These
components create hazardous voltages when the engine is
running.
Keep a fire extinguisher suitable for gasoline, chemical, and
electrical fires nearby.
Do not connect or disconnect any test equipment while the
ignition is on or the engine is running.
Keep the test equipment dry, clean, free from oil, water or
grease. Use a mild detergent in a clean cloth to clean the
outside of the equipment as necessary.
Do not drive the vehicle and operate the test equipment at
the same time. Any distraction may cause an accident.
Refer to the service manual for the vehicle being serviced
and adhere to all diagnostic procedures and precautions.
Failure to do so may result in personal injury or damage to
the test equipment.
To avoid damaging the test equipment or generating false
data, make sure the vehicle battery is fully charged and the
connection to the vehicle DLC is clean and secure.
Do not place the test equipment on the distributor of the
vehicle. Strong electro-magnetic interference can damage
the equipment.
support@autel.com
1-855-288-3587 (North America)
+86 (0755) 8614-7779 (China)
IMPORTANT SAFETY INSTRUCTION
6. Docking Station Port
7. Speaker
8. Collapsible Stand — extends from the back to
allow hands-free viewing of the tablet
9. Rear Camera
10. Camera Flash
MAXISYS ULTRA S2
1. 13.7-inch TFT-LCD Capacitive Touchscreen
2. Ambient Light Sensor — detects ambient brightness
3. Power LED
4. Front Camera
5. Microphone
11. Headphone Jack
12. USB Port
13. USB Port
14. Mini SD Card Slot
15. HDMI (High-Definition Multimedia Interface) Port
16. Type-C Charging Port
17. DC Power Supply Input Port
18. Power/Lock Button — long press to turn on & off the
tablet, or short press to lock the screen
The MaxiSys system has two main components:
MaxiSys Tablet — the central processor and monitor
for the system
MaxiFlash VCMI2 — the vehicle communication and
measurement interface
18
11 12 13 14 15 16 17
2
3
4
1
5
10
8
6
7
9
MaxiSys Tablet
1. Multimeter Jacks
2. USB Port
3. Hook
4. DC Power Supply Input Port
5. Power Button
6. Power LED refer to Table 1-1 Power LED Description for details—
7. Battery LED refer to Table 1-2 Battery LED Description for details—
8. Waveform Generator LED lights green when operating in the waveform —
generator mode
9. Multimeter LED — lights green when operating in the multimeter mode
Do not disconnect this programming device while the vehicle LED is on! If programming is interrupted while
the vehicle’s ECU is blank or only partially programmed, the module may be unrecoverable.
MAXISYS ULTRA S2
MaxiFlash VCMI2
Lights yellow automatically at power up when VCMI2 is self-testing.
Lights solid green when powered on.
• Lights solid red when system failure occurs.
• Flashes red when VCMI2 is upgrading.
Table 1-1 Power LED Description
LED Color Description
Power
Yellow
Green
Red
• Flashes green when VCMI2 is charging.
• Lights solid green when fully charged or the battery level is above 50%.
Lights yellow when the battery level is above 25% but below 50%.
• Lights red when the battery level is above 10% but below 25%.
• Flashes red when the battery level is below 10%.
Table 1-2 Battery LED Description
LED Color Description
Battery
Green
Yellow
Red
10. Oscilloscope LED flashes green when operating —
in the oscilloscope mode
11. Vehicle LED refer to Table 1-3 Vehicle LED —
Description for details
12. Ethernet Port
13. Vehicle Data Connector (DB26-Pin)
14. Input Channel A
15. Input Channel B
16. Input Channel C
17. Input Channel D
• Lights solid green when connected via USB cable.
• Flashes green when communicating via USB/Ethernet cable.
• Lights solid blue when connected via Ethernet cable/Bluetooth.
• Flashes blue when communicating via Bluetooth.
• Lights solid cyan when connected via Wi-Fi.
• Flashes cyan when communicating via Wi-Fi.
Table 1-3 Vehicle LED Description
LED Color Description
Vehicle
Green
Blue
Cyan
12 13
14
15
16 171 2 3 4 5
6
7
8
10
9
11

Specyfikacje produktu

Marka: Autel
Kategoria: Nie skategoryzowane
Model: MaxiSys Ultra S2

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Autel MaxiSys Ultra S2, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Nie skategoryzowane Autel

Autel

Autel MaxiSys Ultra S2 Instrukcja

24 Marca 2025

Instrukcje Nie skategoryzowane

Najnowsze instrukcje dla Nie skategoryzowane

AirLive

AirLive POE-GSH402-BT Instrukcja

25 Marca 2025
ETON

ETON UG VW T5 F3.2 Instrukcja

25 Marca 2025
Ikan

Ikan PT4500S-TMW Instrukcja

25 Marca 2025
WEG

WEG MPW18-3-D004 Instrukcja

25 Marca 2025
Vello

Vello HGS-2 Instrukcja

24 Marca 2025
Genexis

Genexis FiberBox XGS2120 Instrukcja

24 Marca 2025
Thermador

Thermador VTN2DA Instrukcja

24 Marca 2025
Kanto

Kanto CM-EXT60 Instrukcja

24 Marca 2025
Silver Cross

Silver Cross Geneva Wardrobe Instrukcja

24 Marca 2025
Electrolux

Electrolux EOD6F77WV Instrukcja

22 Marca 2025