Instrukcja obsługi Aurora ShredSafe AU1050XE

Aurora niszczarka ShredSafe AU1050XE

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Aurora ShredSafe AU1050XE (15 stron) w kategorii niszczarka. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/15
PATENTED
P R O F E S S I O N A L G R A D E
AU1050XE
Model No. • Modéle No. • Modelo No.
Please read these operating instructions before using the unit.
Avant d’utiliser cet appareil, veuillez lire toutes les instructions.
Antes de operar esta unida, por favor lea todas las instrucciones.
1-800-327-8508
USA ONLY • ETATS SEULEMENT • LOS ESTADOS UNIDOS SOLOMENTE
310-793-5650
INTERNATIONAL • INTERNATIONAL • INTERNACIONAL
Email: info@auroracorp.com
For more information, please visit us at:
www.auroracorp.com
3
INSTALLATION
Mount the shredder securely to the rim of the waste basket. (FIGURE 1)
A socket-outlet should be near the equipment and be easily accessible.
Connect the power cord to any standard 120 volt AC outlet.
ATTENTION:
This model includes a built-in safety interlock mechanism, which requires the shredder to be correctly
mounted on to the included wastebasket. Located on the back center of the shredder, next to the
power cord, there is a curved flap-like shape that must FIT OVER THE OUTSIDE matching ridge of
the wastebasket. (FIGURE #1) THE SHREDDER WILL NOT OPERATE UNLESS IT IS PROPERLY
MOUNTED AS PICTURED!
It is not designed to operate with any other wastebaskets. An activation switch located on the head unit
automatically shuts off the shredder when it is lifted or removed. The supplied wastebasket activates this
switch, which allows the shredder to be operable. Lining the wastebasket with a plastic bag will interfere
and may keep the shredder from functioning.
Caution: Crosscut shredders have very sharp exposed blades on the underside.
Use care when mounting the shredder on the wastebasket.
FIGURE 1
Paper Shredder
Operating Instructions
Installation
Operation
Maintenance
Troubleshooting
Service Center
Warning
Limited Warranty
Sheet Capacity
Paper Shred Size
Paper Entry Width
Credit Card Capacity
Voltage
10 Sheets of 20lb. bond paper*
7/32 in. x 2 in. pieces
(0.56 cm x 5.1 cm pieces)
8.7 in / 22.0 cm
1 at a time
120V~60Hz / 3.0 A
* ONE FOLDED SHEET OF PAPER EQUATES TO 2 SHEETS OF PAPER
Heavier paper, humidity or other than rated voltage may reduce shredding capacity.
54 CONTINUED NEXT PAGE
OPERATION
READY: The shredder is currently on STANDBY and ready to operate when paper is inserted. With the
feed slot now exposed, you can shred sheets of paper or 1 credit card per pass (FIGURE 5).
DISABLED: The safety feature has been activated. SHREDDER IS All power to the
CURRENTLY SHUT OFF AND WILL NOT OPERATE until the cover is returned to the
“READY” setting. The cover has been completely tilted beyond the safe position (FIGURE 5).
When shredding is completed, you can press the designated “PUSH CLOSE” area on the cover to tilt
shut the paper feed slot (FIGURE 4). It is recommended to have the paper feed slot closed when shredder
is not in use to prevent any objects from accidentally getting into the feed slot.
*Be sure to not tilt open the cover completely beyond the preset position, otherwise
the ShredSafe™ power cut off feature will be activated and the shredder will be
inoperable.
Shredding of any of the following materials is considered misuse and will completely
void the product warranty:
Never shred large paper clips, window or insulated envelopes, continuous forms,
newsprint, bound pages (in example: notepads, checkbooks, magazines, etc...),
transparencies, laminated documents, cardboard, any items with adhesives, hard
materials or plastic (except Credit Cards).
This shredder will shred staples and small paperclips. It is recommended that you remove paper clips
whenever possible to extend the lifespan of your shredder.
Only shred credit cards by feeding them vertically into the middle of the entry,
releasing when shredding begins. Never feed more than one credit card at a time.
DO NOT ACTIVATE REVERSE FUNCTION WHILE SHREDDING CREDIT CARDS.
Overfeeding the shredder: Shredding beyond the specified sheet capacity can result in extensive
damage to the shredder. Overfeeding will strain the machine and quickly wear and break the cutting
blades and internal components.
Overheating with extended use: In the event that the shredder has shred continuously beyond
the maximum running time and overheating, the unit will automatically shut off. If this happens, switch
the shredder Off for 30 minutes or longer before resuming normal operation.
FIGURE 5
OPERATION
AUTO / ON:
This setting allows the shredder to be automatically started by inserting paper into the
shred opening. Always feed the paper in as straight as possible. When the paper has
passed through, the shredder will automatically stop. (FIGURE 2)
OFF:
This setting turns off all features of the shredder. For safety reasons, we recommend that
you leave the shredder in the "Off" position whenever the shredder is unattended or not
in use. (FIGURE 2)
REV (REVERSE):
In the unlikely event of a paper jam, the reverse setting can be used to help clear the cutters
of paper that has not passed through. Never attempt to clear a jam by using the reverse
function until you have emptied the wastebasket. (FIGURE 2)
READY:The green LED light indicates the shredder in “On” and ready for use.
I
O
R
FIGURE 3
FIGURE 4
FIGURE 2
ShredSafe™ technology is an added safety feature incorporated in this
particular model. It is a new technology where the shredder is able to detect
forced entry and automatically cuts the power off, preventing further shredding.
To begin shredding, locate the switch on the unit and select the “Auto” mode (FIGURE 2). The Green
LED light indicates the shredder is “On” and ready to use. Press the designated “PUSH OPEN” area
on the handle of the cover to tilt open and expose the paper feed slot (FIGURE 3). The cover will
click into a preset position where the “SHREDDER STATUS” indication line must align
with the “READY” setting.

Specyfikacje produktu

Marka: Aurora
Kategoria: niszczarka
Model: ShredSafe AU1050XE

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Aurora ShredSafe AU1050XE, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje niszczarka Aurora

Aurora

Aurora ShredSafe AU1050XE Instrukcja

20 Maja 2024

Instrukcje niszczarka

Najnowsze instrukcje dla niszczarka

Heinner

Heinner HMC-3B500BK Instrukcja

12 Stycznia 2025
Anova

Anova BIO50V Instrukcja

5 Stycznia 2025
Budget

Budget BGH 2401 Instrukcja

29 Grudnia 2024
Gardenline

Gardenline GLLH 2541 Instrukcja

29 Grudnia 2024
Prowork

Prowork PEH 2135 Instrukcja

26 Grudnia 2024
Fieldmann

Fieldmann FZD 4015-E Instrukcja

17 Grudnia 2024
Fieldmann

Fieldmann FZD 4014-E Instrukcja

17 Grudnia 2024
Fieldmann

Fieldmann FZD 4020-E Instrukcja

13 Grudnia 2024
Pyrex

Pyrex Multi 700 Inox SB-223 Instrukcja

10 Grudnia 2024
Pyrex

Pyrex Multi SB-224 Instrukcja

10 Grudnia 2024