Instrukcja obsługi AudioControl ACX-BT1

AudioControl Niesklasyfikowane ACX-BT1

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla AudioControl ACX-BT1 (6 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/6
BLUETOOTH RECEIVER WITH APTX™ HD SUPPORT
Quick Start Guide
Features
• Compact, elegant design with no buttons or switches
• aptX™ HD Support
• BT v4.1 chip set
• All-weather IPX5 rated
• Universal design works with any amplifier or device with line
level (RCA) inputs
• Unique remote turn-on output circuit
• Pacific Northwest freshness built-in!
2
Quick Start Guide
Important Safety Instructions
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not submerge this apparatus in water.
6. Clean only with a dry cloth.
7. Do not block any ventilation openings. Install in accordance with the
manufacturer’s instructions.
8. Do not install near any heat sources such as mufflers, silencers, exhaust
pipes, or other apparatus (including amplifiers) that produce heat.
9. WARNING: Improper installation may lead to permanent injury or death.
Installation of the apparatus must be done with great care by qualified
personnel, to prevent damage to fuel lines, power and other electrical
wiring, hydraulic brake lines, and other systems, that might compromise
vehicle safety.
10. Provide +12v and ground wiring of sufficient size to ensure adequate
current to the receiver. For the ACX-BT1, this means 16-22 gauge wire.
11. Use rubber grommets to protect wiring whenever passing wires through
metal openings or bulkheads.
12. Only use attachments/accessories specified by the manufacturer.
13. Refer all servicing to qualified service personnel. Servicing is required
when the apparatus has been damaged in any way, such as the power in-
put terminals are damaged, liquid has been spilled or objects have fallen
into the apparatus, the apparatus has been exposed to rain or moisture,
does not operate normally, or has been dropped.
14. Fuses shall be replaced only with the correct type and fuse value, and
only when the apparatus is powered off.
15. Exposure to high sound pressure levels may lead to permanent hearing
loss. Take every precaution to protect your hearing.
The lightning flash with arrowhead symbol within an equilateral
triangle is intended to alert the user to the presence of uninsulated
“dangerous voltage” within the product’s enclosure, that may be of
sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to
alert the user of the presence of important operating and mainte-
nance (servicing) instructions in the literature accompanying the
appliance.
Caution: to reduce the risk of electric shock, do not disassemble the appara-
tus, other than to remove the top panel to access the controls. There are no
user-serviceable parts inside. Refer servicing to
qualified personnel.
Recycling notice: If the time comes and this
apparatus has fulfilled its destiny, do not
throw it out into the trash. It has to be
carefully recycled for the good of mankind, by a facility specially
equipped for the safe recycling of electronic apparatii. Please con-
tact your local or state recycling leaders for assistance in locating
a suitable nearby recycling facility. Or, contact us and we might be
able to repair it for you.
3
1. Remote Turn-On Output (Blue) 12v DC/20mA – This remote
output is designed to turn on a connected amplifier. This output
is only active after audio has begun playing and will remain active
for approximately 7 seconds after audio playback has ceased.
2. 12 Volt Power Input (Fused @ 2A) (Red) – Connect this lead
to an accessory (switched) power source from your vehicle. If
no switched power source is available, a rocker or toggle switch
could also be used to turn the unit on/off.
Note: Depending on the vehicle type and application, you may wish
to connect this lead to a constant 12V power source instead. Be aware
that if the unit is connected in this manner that there will be a small
amount of constant current drawn from the connected power source.
3. Ground Input (Black) – Connect this lead to a solid ground con-
nection from your vehicle.
4. Left RCA line level output (Gray) – This RCA lead connects to the
LEFT low-level input of your amplifier or source unit.
5. Right RCA line level output (Blue) – This RCA lead connects to
the RIGHT low-level input of your amplifier or source unit.
Remote, Power, and Output Connections
q
w
e
r
t

Specyfikacje produktu

Marka: AudioControl
Kategoria: Niesklasyfikowane
Model: ACX-BT1

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z AudioControl ACX-BT1, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Niesklasyfikowane AudioControl

AudioControl

AudioControl TXGM19D10 Instrukcja

9 Października 2024
AudioControl

AudioControl TXFF15D10 Instrukcja

9 Października 2024
AudioControl

AudioControl BLX-1K Instrukcja

5 Października 2024
AudioControl

AudioControl The Epicenter InDash Instrukcja

22 Września 2024
AudioControl

AudioControl ACX-BT1 Instrukcja

14 Września 2024
AudioControl

AudioControl SA-4140i Instrukcja

14 Września 2024
AudioControl

AudioControl Three.2 InDash Instrukcja

14 Września 2024

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane

Black Diamond

Black Diamond BD1121530000ALL1 Instrukcja

15 Października 2024
Husqvarna

Husqvarna K 970 SmartGuard Instrukcja

15 Października 2024
Stihl

Stihl HT 70 Instrukcja

15 Października 2024
Ernesto

Ernesto H14270 Instrukcja

15 Października 2024
Uniden

Uniden BT MIC KIT Instrukcja

15 Października 2024
Vaude

Vaude Omnis Bike 26 Instrukcja

15 Października 2024
ART

ART ProChannel II Instrukcja

15 Października 2024
Aukey

Aukey DR02J Instrukcja

15 Października 2024
Master Lock

Master Lock 653EURD Instrukcja

15 Października 2024
Roland

Roland FR-18 Diatonic Instrukcja

15 Października 2024