Instrukcja obsługi Audio-Technica ATW-CHG3

Audio-Technica Ładowarka baterii ATW-CHG3

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Audio-Technica ATW-CHG3 (15 stron) w kategorii Ładowarka baterii. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/15
User Manual
TWO-BAY CHARGING STATION
ATW-CHG3 / ATW-CHG3N
1
Introduction
Thank you for purchasing this Audio-Technica product.
Before using the product, read through this user manual to ensure that you will use the product correctly. Please keep this manual for future
reference.
Supported models
This product supports the following models. *
• 3000 Digital Series (ATW-DT3101, ATW-DT3102)
• 3000 Series (ATW-T3201, ATW-T3202)
*There are differences in the handled products depending on the country where they are sold.
Recommended batteries
The following batteries can be charged with this product.
Name Manufacturer Capacity
eneloop Panasonic 1900 mAh
eneloop pro Panasonic 2500 mAh
Duracell Rechargeable 1950 mAhDuracell
Energizer Energizer 2300 mAh
Ansmann Ansmann 2850 mAh
VARTA VARTA 2100 mAh
GP ReCyko+ 2700 Series GP Batteries 2600 mAh
• All other company and product names that appear in this document are trademarks or registered trademarks of their respective owners.
Important information
Warning:
• To prevent fire or shock hazard, do not expose this apparatus to rain or
moisture.
Caution:
• Do not expose this apparatus to drips or splashes.
• To avoid electric shock, do not open the cabinet.
• Refer servicing to qualified personnel only.
• Do not expose this apparatus to excessive heat such as that generated
by sunshine, fire or other heat sources.
• Do not subject this apparatus to strong impact.
• This apparatus should be located close enough to the AC outlet so
that you can easily grasp the AC adapter at any time.
• In case of emergency, disconnect the AC adapter quickly.
• Do not place any objects filled with liquids, such as vases, on this
apparatus.
• To prevent fire, do not place any naked flame sources (such as
lighted candles) on this apparatus.
• Do not install this apparatus in a confined space such as a bookcase
or similar unit.
• Install this apparatus only in the places with good ventilation.
• The rating label is put on the bottom of this apparatus.
Battery caution:
• Do not expose the battery to excessive heat such as sunshine, fire or
the like.
• Always consider the environment issues and follow local
regulations when disposing of batteries.
For customers in the USA
FCC Notice
Warning:
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Caution:
You are cautioned that any changes or modifications not expressly
approved in this manual could void your authority to operate this
equipment.
Note: This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
For customers in Canada
IC statement
CAN ICES-3(B)/NMB-3(B)
2
Notes on use
• Be sure to read the user manual for any device that you attach to the product.
• Disconnect the AC adapter from the outlet when this product is not in use.
• Be sure to use this product in combination with components specified by our company.
• When connecting cables, make sure they are inserted all the way up to the plug.
• Over time, discoloration may occur due to ultraviolet rays (especially direct sunlight) and friction.
• Charge on flat areas. Devices will not be charged when the product is tilted.
• If you repeatedly charge rechargeable batteries without completely exhausting them, a phenomenon called the memory effect occurs, where the
power capacity of the batteries is reduced. To prevent this, completely exhaust rechargeable batteries before charging them. If you continue to
have problems recharging the batteries, you may need to replace them with new rechargeable batteries.
• When using the product as a stand without charging, unplug the AC adapter.
• Heat is generated from the AC adapter while charging. Do not place the product near the AC adapter or in places of high temperature.
Rechargeable batteries may not fully charge.
• The capacity of the rechargeable batteries decreases as you repeatedly charge them. If the operation time becomes shorter, we recommend
replacing the batteries with new ones as soon as possible.
• If the product or the charging terminals of charging devices are dirty, the devices may not be able to charge sufficiently. Remove the dirt from the
charging terminals before inserting devices into the product.
• When charging for the first time or when not using the product for long periods, the power capacity of rechargeable batteries may decrease. In
such cases, the batteries will recharge normally (to full capacity) after they have been charged and discharged several times.
• Charge rechargeable batteries every six months even if you have not used them much during that time. Excessive discharging may decrease the
capacity of rechargeable batteries or cause them to no longer be rechargeable.
Maintenance
• If the product becomes stained or covered with dust, be sure to disconnect the power plug before wiping it off with a dry and soft cloth.
• Do not use benzine, thinner or electrical contact cleaner, etc. They may deform or otherwise damage the product, or cause operational failure.

Specyfikacje produktu

Marka: Audio-Technica
Kategoria: Ładowarka baterii
Model: ATW-CHG3

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Audio-Technica ATW-CHG3, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Ładowarka baterii Audio-Technica

Audio-Technica

Audio-Technica ATW-CHG3 Instrukcja

9 Września 2024

Instrukcje Ładowarka baterii

Najnowsze instrukcje dla Ładowarka baterii

MSW

MSW S-CHARGER-20A.2 Instrukcja

15 Października 2024
MSW

MSW S-CHARGER-10A.2 Instrukcja

15 Października 2024
Intenso

Intenso Powerbank 10400 Instrukcja

14 Października 2024
Gembird

Gembird CHM-03 Instrukcja

10 Października 2024
Kostal

Kostal IQ 8.5 Instrukcja

9 Października 2024
Venom

Venom VS5007 Instrukcja

9 Października 2024
Venom

Venom VS5010 Instrukcja

9 Października 2024
Venom

Venom VS2891 Instrukcja

9 Października 2024
Venom

Venom VS2881 Instrukcja

9 Października 2024
Venom

Venom VS2883 Instrukcja

9 Października 2024