Instrukcja obsługi Audio-Technica AT808G


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Audio-Technica AT808G (2 stron) w kategorii mikrofon. Ta instrukcja była pomocna dla 16 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/2
SUBCARDIOID DYNAMIC CONSOLE MICROPHONE
FORM No. ATGC-L0127-07-E
10 dB
20k10k5k2k1k50020010050
8 kHz
200 Hz
1 kHz
5 kHz
330°
300°
270°
240°
210°
180°
150°
120°
90°
60°
30°
Polar Pattern
Frequency Response
SCALE IS 5 DECIBELS PER DIVISION
LEGEND
Frequency in Hertz
LEGEND 12” or more on axis
Response in dB
Machida Tokyo Japan
SPECIFICATIONS
ELEMENT Dynamic
POLAR PATTERN Subcardioid
FREQUENCY RESPONSE 200-5,000 Hz
OPEN CIRCUIT SENSITIVITY -60 dB (1.0 mV) re 1V at 1 Pa
IMPEDANCE 800 ohms
WEIGHT 135 g
DIMENSIONS 412.7 mm long,
25.0 mm head diameter
19.0 mm base diameter
OUTPUT CONNECTOR Integral 3-pin XLRM-type
Output from the microphone’s XLRM-type connector is low
impedance (Lo-Z) balanced. The signal appears across
Pins 2 and 3; Pin 1 is ground (shield). Output phase is
“Pin 2 hot positive acoustic pressure produces positive
voltage at Pin 2.
To avoid phase cancellation and poor sound, all mic cables
must be wired consistently: Pin 1-to-Pin 1, etc. For a high-
impedance (Hi-Z) mic input, connect a Lo-Z balanced
cable to a Hi-Z matching transformer (A-T CP8201 or
equal) at the equipment input.
Plug Type Ground Audio “+” Audio “-”
XLR Pin 1 Pin 2 Pin 3
¼" TRS Sleeve Tip Ring
¼" Sleeve Tip Sleeve
The flexible gooseneck is easy to manipulate for proper
positioning. Heavily lubricated, it operates smoothly and
quietly. Should the unit become noisy with prolonged use,
apply a light machine oil directly on the gooseneck area
affected.
Take care to keep foreign particles from entering the
windscreen. An accumulation of iron or steel lings on the
diaphragm, and/or foreign material in the windscreen’s
mesh surface, can degrade performance.
- Designed for use as a quality talk-
back microphone in entertainment,
commercial and industrial
applications.
- Versatile gooseneck design and
dependable performance.
- Custom-tailored frequency
response ensures excellent
intelligibility in environments with
excessive ambient noise.
- Subcardioid polar pattern reduces
pickup of sounds from the sides
and rear, improving isolation of
desired sound source.
- Protective screen reduces wind
noise and “popping” when used
extremely close.
- Plugs directly into an XLRF-type
surface or cable connector.
10 dB
20k10k5k2k1k50020010050
8 kHz
200 Hz
1 kHz
5 kHz
330°
300°
270°
240°
210°
180°
150°
120°
90°
60°
30°
指向特性
频率特性
声压曲线 1刻度5 dB
频率
频率 (赫兹)
电平 平直
响应电平 (dB)
FORM No. ATGC-L0127-07-C
准心形指向性调控台动圈话筒
Machida Tokyo Japan
技术指标
收音头 动圈式
指向特性 准心形指向性
频率响应 200-5,000 Hz
开通灵敏度 -60 dB (1.0 mV) 1V 1 Pa
输出阻抗 800 欧姆
重量 135 g
外形尺寸 412.7 mm 长,
25.0 mm 收音头外径,
19.0 mm 底座外径
输出连接器 内置 XLRM-3针卡农公头
话筒的 卡农输出端为低阻抗平衡输出,XLRM
话筒音频信号最终以卡农公头的23号针脚
1 线 ()
相位将以正相位电平设于2
为避免出现相位相互抵消而失真的情况,所有
线1-12-23-3
把针脚连接。如连接高阻抗的话筒输入,请配
器 。AT8201
插头类 地线 音频“+ 信号 音频“-”信号
XLR 卡农 1号针脚 2号针脚 3号针脚
¼"TRS 大三芯 Sleeve(套) Tip(尖) Ring(环)
¼"TR 大二芯 Sleeve(套) Tip(尖) Sleeve(套)
灵活的鹅颈式结构容易控制到适当位置。非常
润滑灵活,可顺利和安静地操作。如果在长时
间使用后发现话筒鹅颈位置出现噪音,请使用
润滑机油直接加进到鹅颈位置。
小心不要把金属碎或铁屑掉进防风罩内,铁屑
会吸进收音头磁铁中,或贴在防风罩内,将会
-
-
-
-
提高收音目标的隔离度。
-
- XLRF可直接插入连接到 卡
农母头的板面或连接线。


Specyfikacje produktu

Marka: Audio-Technica
Kategoria: mikrofon
Model: AT808G

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Audio-Technica AT808G, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje mikrofon Audio-Technica

Instrukcje mikrofon

Najnowsze instrukcje dla mikrofon

Countryman

Countryman B6 Instrukcja

15 Stycznia 2025
Pyle

Pyle PMKSHUSB04 Instrukcja

15 Stycznia 2025
DJI

DJI Mic Mini Instrukcja

15 Stycznia 2025
Vonyx

Vonyx CMS320B Instrukcja

15 Stycznia 2025
BOYA

BOYA BY-PM700 Instrukcja

14 Stycznia 2025
HyperX

HyperX QuadCast S Instrukcja

12 Stycznia 2025
Schertler

Schertler STAT-C Instrukcja

11 Stycznia 2025
Shure

Shure SBC210LM Instrukcja

10 Stycznia 2025
AKG

AKG GN50 M Instrukcja

10 Stycznia 2025