Instrukcja obsługi Audio-Technica AT2020 USB

Audio-Technica mikrofon AT2020 USB

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Audio-Technica AT2020 USB (2 stron) w kategorii mikrofon. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/2
20 series studio microphones
AT2020
Cardioid Condenser Side-Address Microphone
Features
• Designed for project/home-studio applications
• High SPL handling and wide dynamic range provide unmatched
versatility
• Custom-engineered low-mass diaphragm provides extended
frequency response and superior transient response
• Cardioid polar pattern reduces pickup of sounds from the sides
and rear, improving isolation of desired sound source
• Rugged design and construction for reliable performance
• Pivoting, threaded stand mount attaches securely for easy and
precise placement of the microphone
Description
The AT2020 is a side-address xed-charge condenser microphone with a
cardioid polar pattern. It is designed for project/home studio applications.
The microphone requires 48V phantom power for operation.
The cardioid polar pattern of the microphone is more sensitive to sound
originating directly in front of the element, making it useful in controlling
feedback, reducing pickup of unwanted sounds and providing isolation
between performers.
The output of the microphone is a 3-pin XLRM-type connector.
The microphone is enclosed in a rugged housing. The included stand mount
permits mounting on any microphone stand with 5/8"-27 threads. A soft
protective pouch is also included.
Operation and Maintenance
The AT2020 requires 48V phantom power for operation.
Output is low impedance (Lo-Z) balanced. The signal appears across Pins
2 and 3; Pin 1 is ground (shield). Output phase is “Pin 2 hot”— positive
acoustic pressure produces positive voltage at Pin 2.
To avoid phase cancellation and poor sound, all mic cables must be wired
consistently: Pin 1-to-Pin 1, etc.
An Audio-Technica emblem is on the front of the microphone. Position
this side of the microphone toward the sound source.
In use, secure the cable to the mic stand or boom, leaving a slack loop
at the mic. This will ensure the most effective shock isolation and reduce
the possibility of accidentally pulling the microphone out of its mount.
Avoid leaving the microphone in the open sun or in areas where
temperatures exceed 110° F (43° C) for extended periods. Extremely high
humidity should also be avoided.
Architect’s and Engineer’s Specications
The microphone shall be a side-address xed-charge condenser. It shall
have a cardioid polar pattern with a uniform 120° angle of acceptance
and a frequency response of 20 Hz to 20,000 Hz. The microphone shall
operate from an external 48V DC phantom power source. It shall be
capable of handling sound input levels up to 144 dB with a dynamic range
of 124 dB. Nominal open-circuit output voltage shall be 14.1 mV at 1V, 1
Pascal. Output shall be low impedance balanced (100 ohms).
The output of the microphone shall be a 3-pin XLRM-type connector.
The microphone shall be 162.0 mm (6.38") long and have a maximum body
diameter of 52.0 mm (2.05"). Weight shall be 345 grams (12.1 oz). The
microphone shall include a stand mount and a soft protective pouch.
The Audio-Technica AT2020 is specied.
AT2020
Audio-Technica U.S., Inc., 1221 Commerce Drive, Stow, Ohio 44224
Audio-Technica Limited, Old Lane, Leeds LS11 8AG England
©2010 Audio-Technica U.S., Inc. audio-technica.com 0001-0204-01
Specications
LEGEND
200 Hz
1 kHz
5 kHz
8 kHzSCALE IS 5 DECIBELS PER DIVISION
240˚
180˚
210˚
270˚
300˚
330˚ 0˚
150˚
120˚
90˚
30˚
60˚
12" or more on axisLEGEND
Frequency in Hertz
Response in dB
10 dB
100
50 200 10k5k1k500 2k 20k
frequency response: 20 –20,000 Hz
polar pattern
Fixed-charge back plate, permanently
polarized condenser
Cardioid
20-20,000 Hz
–37 dB (14.1 mV) re 1V at 1 Pa
100 ohms
144 dB SPL, 1 kHz at 1% T.H.D.
20 dB SPL
124 dB, 1 kHz at Max SPL
74 dB, 1 kHz at 1 Pa
48V DC, 2 mA typical
345 g (12.1 oz)
162.0 mm (6.38") long,
52.0 mm (2.05") maximum body diameter
Integral 3-pin XLRM-type
R7
Stand mount for 5/8"-27 threaded stands;
5/8"-27 to 3/8"-16 threaded adapter; soft
protective pouch
Element
Polar pattern
Frequency response
Open circuit sensitivity
Impedance
Maximum input sound level
Noise1
Dynamic range (typical)
Signal-to-noise ratio1
Phantom power requirements
Weight
Dimensions
Output connector
Audio-Technica case style
Accessories furnished
In the interest of standards development, A.T.U.S.
offers full details on its test methods to other industry
professionals on request.
1 Pascal = 10 dynes/cm2 = 10 microbars = 94 dB SPL
1 Typical, A-weighted, using Audio Precision System One.
Specications are subject to change without notice.
465

Specyfikacje produktu

Marka: Audio-Technica
Kategoria: mikrofon
Model: AT2020 USB

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Audio-Technica AT2020 USB, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje mikrofon Audio-Technica

Audio-Technica

Audio-Technica BP892xCW Instrukcja

13 Stycznia 2025
Audio-Technica

Audio-Technica ATGM2 Instrukcja

6 Grudnia 2024
Audio-Technica

Audio-Technica Creator Pack Instrukcja

6 Grudnia 2024
Audio-Technica

Audio-Technica AT2040 Instrukcja

6 Grudnia 2024
Audio-Technica

Audio-Technica AE2500 Instrukcja

6 Grudnia 2024
Audio-Technica

Audio-Technica AT881TH/RC Instrukcja

6 Grudnia 2024
Audio-Technica

Audio-Technica AT882TH Instrukcja

6 Grudnia 2024
Audio-Technica

Audio-Technica AT882TH/D3RC5 Instrukcja

6 Grudnia 2024
Audio-Technica

Audio-Technica AT4033a Instrukcja

6 Grudnia 2024
Audio-Technica

Audio-Technica AT2020USB+V Instrukcja

6 Grudnia 2024

Instrukcje mikrofon

Najnowsze instrukcje dla mikrofon

Comica

Comica Vimo C2 Instrukcja

12 Marca 2025
Countryman

Countryman B6 Instrukcja

15 Stycznia 2025
Pyle

Pyle PMKSHUSB04 Instrukcja

15 Stycznia 2025
DJI

DJI Mic Mini Instrukcja

15 Stycznia 2025
Vonyx

Vonyx CMS320B Instrukcja

15 Stycznia 2025
BOYA

BOYA BY-PM700 Instrukcja

14 Stycznia 2025
Sound Devices

Sound Devices Astral A20-HH Instrukcja

13 Stycznia 2025
HyperX

HyperX QuadCast S Instrukcja

12 Stycznia 2025
Schertler

Schertler STAT-C Instrukcja

11 Stycznia 2025
Shure

Shure SBC210LM Instrukcja

10 Stycznia 2025