Instrukcja obsługi Audio-Technica AE5400

Audio-Technica mikrofon AE5400

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Audio-Technica AE5400 (2 stron) w kategorii mikrofon. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/2
User Manual
Cardioid Condenser Handheld Microphone AE5400
■Features
■Notes on use
■Connection procedure
This product requires 48 V
DC phantom power.
Outp n sut termi al
PIN1 (ground)
PIN3
(cold)
PIN2 (hot)
■Specifications
Externally polarized (DC Bias) condenser
Cardioid
20 - 20,000 Hz
80 Hz, 12 dB/octave
-40 dB (10.0 mV) re 1V at 1 Pa
150 ohms
147 dB SPL, 1 kHz at 1% T.H.D.
157 dB SPL, with 10 dB pad (normal)
14 dB SPL
133 dB, 1 kHz at Max SPL
80 dB, 1 kHz at 1 Pa
11-52 V DC, 3 mA typical
High-pass filter,
10 dB pad (normal)
Integral 3-pin XLRM-type
• 1 Pascal = 10 dynes/cm2 = 10 microbars = 94 dB SPL
* Typical, A-weighted, using Audio Precision System One.
■P r atternola p
■Fr r o eequency esp ns
180°
150°
120°
30°
0°
330°
300°
270°
240°
210°
Audio-Technica Corporation
2-46-1 Nishi-naruse, Machida, Tokyo 194-8666, Japan
©2017 Audio-Technica Corporation
Global Support Contact: www.at-globalsupport.com
11-DEC--2020 Form No.ATGC-L0389-20
LEGEND
0°, 50cm
SCALE IS 5 DECIBELS PER DIVISION
LEGEND
200 Hz
1 kHz
5 kHz
8 kHz
Thank you for purchasing this product. Before using the product, read through the user
manual to ensure that you will use the product correctly.
Please keep this manual for future reference.
Offering exceptional sound quality, the AE5400 uses the same condenser element as the
classic AT4050 studio microphone. This large diaphragm element ensures an accurate,
natural response. With a 80 Hz HPF switch and 10 dB pad, the sound can be perfectly
tailored to suit your voice. With a hardened steel body and grille and multi-stage internal
windshield, the AE5400 is rugged and durable, with exceptionally low handling noise and
protection against plosives and sibilance, making it a fantastic on stage microphone.
Output from the microphone’s XLRM-type connector is low impedance (Lo-Z) balanced. The
signal appears across Pins 2 and 3; Pin 1 is ground (shield). Output phase is “Pin 2 hot” –
positive acoustic pressure produces positive voltage at Pin 2.
When using the AE540 in settings with a stage monitor speaker, the speaker should be
located 180° off axis (at rear of the microphone). This placement, in conjunction with the
microphone's uniform cardioid pickup pattern, will virtually eliminate the possibility of
undesired audio feedback.
Avoid leaving the microphone in the open sun or in areas where temperatures exceed 43°C
for extended periods. Extremely high humidity should also be avoided.
Connect e as a microphone the output terminals of the microphone to a d vice that h
input (balanced input) compatible with a phantom p er supply. The output connector ow
is an XLRM-type with polarity as shown in the figure below.
For product improvement, the product is sublect to modification without notice.
• Same element as the renowned AT4050 studio condenser
• Condenser element gives pristine natural sound quality
• Hardened steel body and grille for rugged durability
• Cardioid polar pattern gives improved sound isolation
• Multi-stage grille for reduced plosives and sibilance
• Integral 80 Hz HPF switch and 10 dB pad
• Ergonomic design for easy handling
■Safety precaution
■Cautions for the product
Although this product was designed to be used safely, failing to use it correctly may result in
an accident. To ensure safety, observe all warnings and cautions while using the product.
• Do not subject the product to strong impact to avoid malfunction.
• Do not disassemble, modify or attempt to repair the product.
• Do not handle the product with wet hands to avoid electric shock or injury.
• Do not store the product under direct sunlight, near heating devices or in a hot, humid or
dusty place.
Element
Polar pattern
Frequency response
Low Frequency response
Open circuit sensitivity
Impedance
Maximum input sound level
Noise
Dynamic range (typical)
Signal-to-noise ratio
Phantom power requirements
Switch
Output connector
Roll-off
330 g
179.0 mm long, 50.0 mm head diameter,
33.0 mm to 22.0 mm tapered body diameter
Weight (less accessories)
Dimensions
Included accessories AT8470 Quiet-Flex stand clamp for 5/8"-27 threaded stands;
soft protective pouch
60°
90°
Response in dB
Frequency in Hertz
10
0
-10
-20
-30
20
50010050 200 10k5k1k 2k 20k
10 dB
大振膜心形指向手持电容话筒 AE5400
本产品使用直流 48V 幻象电源。
输出端子
针脚1（接地）
针脚3
（负）
针脚2（正）
■规格
直流偏压型大振动膜电容膜片
心形指向性
20 - 20,000 Hz
80 Hz，12 dB/octave
-40 dB（10.0mV) 以 1V 于 1Pa
150 欧姆
直流 11-52V，3mA 典型
低截滤波，10 dB 衰减
元件
指向性
频率响应
高通滤波
开路灵敏度
输出阻抗
147 dB 声压, 1 kHz 于 1% T.H.D.
157 dB 声压, 于 10 dB 衰减 (正常)
14 dB 声压
最大承受声压
噪声
幻象供电
开关
• 1 帕＝ 10 达 平方厘米＝ 10 微巴＝ 94 dB SPL因 /
* 典型，A 计权，使用 Audio Precision System One
因产品改进，本产品会随时改装，恕不另行通知。
■指向性
■频率响应
Audio-Technica Corporation
2-46-1 Nishi-naruse, Machida, Tokyo 194-8666, Japan
©2017 Audio-Technica Corporation
全球支持联系：www.at-globalsupport.com
响应单位是 dB
频率单位是赫兹
图例
0°， 厘米50
比例是每分隔线 5 分贝
图例
200 赫兹
1 千赫兹
5 千赫兹
8 千赫兹
用戶手冊
感谢您购买本产品。在使用产品之前，请全文浏览本用户手册以确保您将正确地
使用本产品。请妥善保存本手册，以供将来参考。
■产品特点
• 与著名的 AT4050 录音棚话筒使用相同的收音元件
• 电容元件能提供原有的自然音色
• 强化的钢制主体和保护网格栅，坚固耐用
• 心形指向性设计，能提高收音目标的隔离度
• 多层式保护网格栅，减少爆破音和噪音干扰
• 内置 80Hz 高通滤波器及 10dB 衰减
• 人体工程学设计，易于手持
■使用注意事项
AE5400提供卓越的音质，与经典的AT4050录音棚话筒采用相同的电容收音元件
，这大型振膜元件可确保有准确、自然的响应。藉着 80Hz 高通滤波器及 10dB 衰
减，能更好地定制声音以适合收音需要。AE5400具有强化的钢制机体和保护网格
栅以及多层式内部挡风棉，坚固耐用，能防止破声，并具有更低的手持噪声，使
其成为舞台话筒的理想之选。
话筒的XLRM卡农输出端为低阻抗平衡输出，话筒音频信号最终以卡农公头的2号
及3号针脚输出，而1号针脚则为地线(屏蔽)连接。输出相位将以正相位电平设于2
号针脚上。
在设置有监听音箱的舞台中使用 AE5400 时，音箱应位于话筒偏离轴180°的位置
（即话筒的后方）。这种放置方式与话筒的心形指向收音方式相结合，能在无形
中消除不希望有的音频反馈声。
把话筒暴露于高温中可能导致输出电平逐渐及永久性减弱，应避免将话筒留在日
晒的地方或长时间置于温度超过43°C的地方，而极高湿度也应避免。
■连接步骤
将话筒的输出端子连接到具有兼容幻象电源的话筒输入（平衡输入）的设备。输
出接口是XLRM型接口，其极性如下图所示。
11-DEC-2020 Form No.ATGC-L0389-20
■安全预防措施
■本产品注意事项
虽然本产品采用安全设计，但使用不当仍可能发生事故。为了确保安全，使用本
产品时请注意全部警告和提醒。
• 切勿让本产品遭受强烈冲击，以避免发生故障。
• 切勿拆开、改装或尝试维修本产品。
• 切勿用湿手握持本产品，以免触电或受伤。
• 切勿将本产品存放在阳光直射的地方、加热装置附近或者炎热、潮湿或多尘的
地方。
高通滤波
133 dB, 1 kHz 于最高声压
80 dB, 1 kHz 于 1 Pa
动态范围 (典型)
信噪比
内置式 3 针卡农公头输出端子
330 克
长度 179.0 mm, 保护网直径 50.0 mm
锥形话筒身直径 33.0 mm 至 22.0 mm
重量
(不含配件)
尺寸
附带配件 AT8470 Quiet-Flex 防震式 5/ -27 接头话筒夹;8＂
保護袋
10 dB
10
0
-10
-20
-30
20
50010050 200 10k5k1k 2k 20k
180°
150°
120°
30°
0°
330°
300°
270°
240°
210°
60°
90°

Specyfikacje produktu

Marka: Audio-Technica
Kategoria: mikrofon
Model: AE5400

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Audio-Technica AE5400, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje mikrofon Audio-Technica

Audio-Technica

Audio-Technica BP892xCW Instrukcja

13 Stycznia 2025
Audio-Technica

Audio-Technica ATGM2 Instrukcja

6 Grudnia 2024
Audio-Technica

Audio-Technica Creator Pack Instrukcja

6 Grudnia 2024
Audio-Technica

Audio-Technica AT2040 Instrukcja

6 Grudnia 2024
Audio-Technica

Audio-Technica AE2500 Instrukcja

6 Grudnia 2024
Audio-Technica

Audio-Technica AT881TH/RC Instrukcja

6 Grudnia 2024
Audio-Technica

Audio-Technica AT882TH Instrukcja

6 Grudnia 2024
Audio-Technica

Audio-Technica AT882TH/D3RC5 Instrukcja

6 Grudnia 2024
Audio-Technica

Audio-Technica AT4033a Instrukcja

6 Grudnia 2024
Audio-Technica

Audio-Technica AT2020USB+V Instrukcja

6 Grudnia 2024

Instrukcje mikrofon

Najnowsze instrukcje dla mikrofon

Countryman

Countryman B6 Instrukcja

15 Stycznia 2025
Pyle

Pyle PMKSHUSB04 Instrukcja

15 Stycznia 2025
DJI

DJI Mic Mini Instrukcja

15 Stycznia 2025
Vonyx

Vonyx CMS320B Instrukcja

15 Stycznia 2025
BOYA

BOYA BY-PM700 Instrukcja

14 Stycznia 2025
Sound Devices

Sound Devices Astral A20-HH Instrukcja

13 Stycznia 2025
HyperX

HyperX QuadCast S Instrukcja

12 Stycznia 2025
Schertler

Schertler STAT-C Instrukcja

11 Stycznia 2025
Shure

Shure SBC210LM Instrukcja

10 Stycznia 2025
AKG

AKG GN50 M Instrukcja

10 Stycznia 2025