Instrukcja obsługi Atlona AT-OME-EX-KIT-LT

Atlona Wzmacniacz sygnału WiFi AT-OME-EX-KIT-LT

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Atlona AT-OME-EX-KIT-LT (16 stron) w kategorii Wzmacniacz sygnału WiFi. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/16
1
Installation Guide
AT-OME-EX-KIT-LT
Omega™ 4K/UHD
HDMI Over HDBaseT TX/RX with USB
AT-OME-EX-KIT-LT
The Atlona AT-OME-EX-KIT-LT is an HDBaseT extender for video up to 4K/60 4:2:0, plus
embedded audio, control, and USB over distances up to 130 feet (40 meters) for 4K/UHD, and up
to 230 feet (70 meters) for 1080p/60 video. Part of the Omega™ Series of integration products for
modern AV communications and collaboration, the OME-EX-KIT-LT is HDCP 2.2 compliant and
extends IR and RS-232 control signals. The integrated USB extension addresses the challenge
of connecting between USB devices at remote locations, and is ideal for software video
conferencing and touch or interactive displays. The transmitter includes a USB 2.0 host interface
for a PC, plus two peripheral devices such as a speakerphone, microphone, or keyboard and
mouse. The receiver provides two USB interfaces for devices such as a camera, soundbar, or
display.*
* Both the AT-OME-EX-TX-LT and AT-OME-EX-RX-LT are not compatible with the AT-UHD-
HDVS-300 system for extending USB.
IMPORTANT: Visit http://www.atlona.com/product/AT-OME-EX-KIT-LT for the
latest rmware updates.
1 x AT-OME-EX-TX-LT
1 x AT-OME-EX-RX-LT
2 x Captive screw connectors, 4-pin
1 x Captive screw connector, 2-pin
1 x AT-IR-CS-TX
4 x Mounting plates
8 x Mounting screws
1 x 48 V DC power supply
1 x Installation Guide
Package Contents
2
Installation Guide
AT-OME-EX-KIT-LT
FWHOST
OMEGATM
DEVICE
PWR
LINK
HDMI INHDBaseT OUT
RX RXTX
RS-232 IRTEST
AT-OME-EX-TX-LT
1 DEVICE
Connect up to two USB devices (e.g. mouse, keyboard, etc.) to these ports. These ports
provide 2.5 W per USB device interface.
2 HOST
Connect a USB cable from this port to the host computer.
3 FW
Connect a micro-USB to USB-A cable from this port, to a computer, to update the rmware.
Refer to for more information.Updating the Firmware (page 10)
4 PWR / LINK
The LED indicator will glow green when the AT-OME-EX-TX-LT is powered. The AT-PWR
OME-EX-RX-LT supplies power to the AT-OME-EX-TX-LT over HDBaseT. The LED LINK
indicator glows yellow when a solid link is established between the AT-OME-EX-TX-LT and
AT-OME-EX-RX-LT. Refer to for more information.LED Indicators (page 6)
5 TEST
Press and release this button to test the integrity of the HDBaseT connection, between
the transmitter and the receiver. If the connection is good, then the TEST LED indicator
will glow bright green. Refer to Testing the HDBaseT Connection (page 7) for more
information.
6 RS-232 / IR
Connect the included 4-pin captive screw block to this receptacle. Refer to RS-232 and IR
(page 4) for more information.
7 HDBaseT OUT
Connect a category cable from this port to the port of the AT-OME-EX-RX-LT HDBaseT IN
or other PoE-compatible receiver.
8 HDMI IN
Connect an HDMI cable from this port to the source device.
Front
Rear
8
65 7
12 3 4
AT-OME-EX-TX-LT
3
Installation Guide
AT-OME-EX-KIT-LT
FW
OMEGATM
DEVICE
PWR
LINK
HDMI OUTHDBaseT IN
RX TXT X
RS-232 IR
AT-OME-EX-RX-LT
DC 48VDC 48V
-
+
1 DEVICE
Connect up to two USB 2.0 devices (e.g. mouse, keyboard, etc.) to these ports.
These ports provide 2.5 W per USB device.
2 FW
Connect a micro-USB to USB-A cable from this port, to a computer, to update the rmware.
Refer to for more information.Updating the Firmware (page 10)
3 PWR / LINK
The LED indicator will glow green when the AT-OME-EX-RX-LT is powered. The PWR LINK
LED indicator glows yellow when a solid link is established between the AT-OME-EX-TX-LT
and AT-OME-EX-RX-LT. Refer to for more information.LED Indicators (page 6)
4 DC 48V
Connect the included 2-pin captive screw block from this receptacle to the power supply.
This connection supplies power to the AT-OME-EX-TX-LT. Refer to Power (page 4) for
more information.
5 RS-232 / IR
Connect the included 4-pin captive screw block to this receptacle. Refer to RS-232 and IR
(page 4) for more information.
6 HDBaseT IN
Connect a category cable from this port to the port of the AT-OME-EX-TX-HDBaseT OUT
LT. The AT-OME-EX-TX-LT is powered by the AT-OME-EX-RX-LT over HDBaseT.
7 HDMI OUT
Connect an HDMI cable from this port to the display (sink) device.
AT-OME-EX-RX-LT
Front
Rear
7
54 6
12 3

Specyfikacje produktu

Marka: Atlona
Kategoria: Wzmacniacz sygnału WiFi
Model: AT-OME-EX-KIT-LT

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Atlona AT-OME-EX-KIT-LT, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Wzmacniacz sygnału WiFi Atlona

Atlona

Atlona AT-OME-EX-TX Instrukcja

23 Września 2024
Atlona

Atlona AT-OME-EX-KIT Instrukcja

23 Września 2024
Atlona

Atlona AT-PS-POE Instrukcja

23 Września 2024
Atlona

Atlona AT-AVA-EX70C-KIT Instrukcja

23 Września 2024
Atlona

Atlona AT-OME-EX-KIT-LT Instrukcja

23 Września 2024

Instrukcje Wzmacniacz sygnału WiFi

Najnowsze instrukcje dla Wzmacniacz sygnału WiFi

Hawking Technologies

Hawking Technologies HOW2R1 Instrukcja

14 Października 2024
Planet

Planet WNAP-1110 Instrukcja

10 Października 2024
Netgear

Netgear WN2000RPTv2 Instrukcja

10 Października 2024
Xiaomi

Xiaomi RA75 Instrukcja

9 Października 2024
Cudy

Cudy RE3000 Instrukcja

8 Października 2024
Cudy

Cudy RE1200 Instrukcja

8 Października 2024
Netgear

Netgear EX6170 Instrukcja

8 Października 2024
Extron

Extron FOX 3G HD-SDI SM Instrukcja

8 Października 2024
Extron

Extron FOXBOX Rx VGA MM Instrukcja

8 Października 2024
Extron

Extron FOX 3G HD-SDI P SM Instrukcja

8 Października 2024