Instrukcja obsługi Atlona AT-OME-CS31-SA-HDBT

Atlona przełącznik AT-OME-CS31-SA-HDBT

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Atlona AT-OME-CS31-SA-HDBT (7 stron) w kategorii przełącznik. Ta instrukcja była pomocna dla 10 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/7

Installation Guide

AT-OME-CS31-SA-HDBT

AV Presentation

and Collaboration System

AT-OME-CS31-SA-HDBT

The Atlona AT-OME-CS31-SA-HDBT is an AV presentation and collaboration system for

classrooms and conference rooms. It features AV switching of remote and local sources, a mixer

amplier, and USB hub.

The switcher has one HDBaseT® input supporting extension of HDMI, Ethernet, power, control,

and USB 2.0 data up to 330 feet (100 meters) as well as two HDMI® inputs. Sources connected

to these inputs, such as laptops, computers, and document cameras, are routed to the HDMI

output connected to a projector or display. The amplier of the OME-CS31-SA-HDBT delivers

either two channels of 25 watts or a single channel of 50 watts into 4 or 8 ohms. It features one

balanced stereo audio input and two unbalanced stereo audio inputs with independent level

control for each. A balanced stereo line level output allows the mixed signal to be passed to

an assistive listening system or separate amplier. The OME-CS31-SA-HDBT’s USB system

integrates a USB 2.0 host over HDBaseT with a local USB 3.0 host and connections for four

peripheral devices such as cameras, speakerphones, interactive displays, keyboards, mice, or

storage devices.

IMPORTANT: Visit https://www.atlona.com/product/at-ome-cs31-sa-hdbt for the latest

rmware updates and User Manual.

1 x AT-OME-CS31-SA-HDBT

1 x Envelope of mating connectors for all captive-screw connectors

1 x Surface mount brackets

4 x rubber feet

1 x 24 V / 5 A power supply

1 x AC cord

1 x Insert w/ QR code

Package Contents

Installation Guide

AT-OME-CS31-SA-HDBT

HDBaseT IN

2 3

5V FWINPUT

PWR LAN LINK

IN1

MIC L/R L/R

IN2 IN3

HDMI I N HOST AUDI O INAT- OME-CS31-SA-HDBT

SWIT CH ER WIT H

AUDI O AMPLIFIER

1 LED Indicators

Displays the current state of the unit:

PWR - LED will be red while the unit

is booting and green when operating

normally.

LAN - LED will be green when connected

to a switch or other LAN device.

LINK - LED will be green when connected

to an HDBaseT transmitter.

IN1 IN2 IN3, , - LED will be green when set

to the current input.

2 INPUT

Press and release this button to cycle

between each of the available inputs.

3 HDBaseT IN

Connect a category cable from this port

to a compatible HDBaseT transmitter or

switcher.

4 HDMI IN

Connect an HDMI cable from each of

these ports to an HDMI source.

5 HOST

Connect a USB cable from this port to the

host USB device.

6 MIC

This port is for future use.

7 VOICE L/R

Connect the included 5-pin captive screw

connector from this port to a balanced

analog audio input.

8 L/R

Connect a music player, Bluetooth

™

receiver, or other unbalanced stereo

source to each of these 3.5 mm mini-

stereo ports.

9 5V

Provides +5 V USB power. Can be used

to attach Bluetooth

™ audio adapters or

powered USB hubs.

10 FW

This USB-C port is used to update the

rmware. Refer to the User Manual for

more information.

Front Panel Descriptions

1 3 6 7 92 4 5 8

Installation Guide

AT-OME-CS31-SA-HDBT

HDMI OUTHUBAUDI O OUTAMP OUTPA SENSERS-232T RI GGER I/OLAN

100V

70V

25V

CLASS 2 WIRI NG

T RI GGER R

RXP

LRL

24V 5A

Rear Panel Descriptions

1 24V / 5A

Connect the included 24 V / 5 A power

supply from this port to an available AC

electrical outlet.

2 LAN

Connect an Ethernet cable from either of

these ports to the LAN. The other LAN

port can be used to connect an Ethernet

cable to a display or other device.

3 TRIGGER I/O

Connect the included double-stack 4-pin

connector to this port. This port consists

of two separate ports: TRIGGER I/O 1

(top) and (bottom).TRIGGER I/O 2

4 RS-232

Connect the included double-stack 3-pin

captive screw connector to this port.

This port consists of two separate ports:

RS-232 1 RS-232 2 (top) and (bottom).

5 TRIGGER (PA SENSE)

Connect the included 2-pin captive screw

connector to this port. Supports audio

mute with contact closure or PA sense so

announcements can be heard clearly.

6 GND/25V/75V/100V (PA SENSE)

Connect the included 4-pin captive screw

connector from this port to a PA speaker

system.

7 Potentiometer (PA SENSE)

Adjusts the trigger voltage sensitivity.

8 AMP OUT

Connect the included 4-pin captive screw

connector from this port to a pair of

program / stereo speakers. Supports 2 x

25 watts @ 4/8 ohms amplier (stereo or

dual mono) or 1 x 50 watts @ 4/8 ohms

(bridged).

9 AUDIO OUT

Connect the included 5-pin captive screw

connector from this port to an assistive

listening device or additional amplier.

10 HUB

Connect up to 4 USB devices to these

ports.

11 HDMI OUT

Connect an HDMI cable from this port to

a display.

981 3 6 7 112 4 5 10

Specyfikacje produktu

Marka:	Atlona
Kategoria:	przełącznik
Model:	AT-OME-CS31-SA-HDBT

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Atlona AT-OME-CS31-SA-HDBT, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje przełącznik Atlona

Atlona AT-OME-CS31-SA-HDBT Instrukcja

10 Stycznia 2025

Atlona AT-OME-SW32 Instrukcja

10 Stycznia 2025

Atlona AT-OME-MH21-CP Instrukcja

10 Stycznia 2025

Atlona AT-OME-MS52W Instrukcja

10 Stycznia 2025

Atlona AT-GAIN-M50-LZ Instrukcja

10 Stycznia 2025

Atlona Omega AT-OME-PS62 Instrukcja

27 Grudnia 2024

Atlona AT-OME-SR21 Instrukcja

23 Września 2024

Atlona AT-HDR-H2H-44MA Instrukcja

23 Września 2024

Atlona AT-OME-PS62 Instrukcja

23 Września 2024

Atlona AT-OME-RX11 Instrukcja

27 Maja 2024

Instrukcje przełącznik

Najnowsze instrukcje dla przełącznik

AirLive IG-641RPOE Instrukcja

12 Marca 2025

AirLive IGM-1082RBT Instrukcja

12 Marca 2025

Powerfix PSSS 2 A1 Instrukcja

14 Stycznia 2025

INOGENI CAM230 Instrukcja

14 Stycznia 2025

Schneider CCT15225 Instrukcja

14 Stycznia 2025

Luxul XMS-5248P Instrukcja

14 Stycznia 2025

Luxul AMS-2624P Instrukcja

14 Stycznia 2025

Luxul XGS-1005 Instrukcja

14 Stycznia 2025

Luxul AGS-1008M Instrukcja

14 Stycznia 2025

Luxul XMS-1208P Instrukcja

14 Stycznia 2025