Instrukcja obsługi Atlas ALS-LFI220

Atlas głośnik ALS-LFI220

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Atlas ALS-LFI220 (40 stron) w kategorii głośnik. Ta instrukcja była pomocna dla 9 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/40

Linea Focus

Electronically Steerable Line Source Systems

User Manual

LFI-120

LFI-220

LFI-350

LFI-450

Important informaon:

Linea Focus Fohhn Audio So series models can only be congured using . For soware handling see

separate user instrucons.

For connecon to a PC, Fohhn-Net Adapter -NA 11 is required.

Before using your Linea Focus system, please read this manual carefully and keep it for future

reference.

0. Important Safety Informaon

Please read the following safety informaon carefully before operang the loudspeaker system(s).

Keep this informaon for future reference.

A lightning ash with arrowhead symbol within an equilateral triangle alerts the user to the

presence of uninsulated, dangerous voltage within the system enclosure that may be of

sucient magnitude to constute risk of electric shock.

An exclamaon mark within an equilateral triangle alerts the user to important informaon

regarding to safety, maintenance or service.

Compliance with safety provisions against re hazard risk of electronic shock d injury to , an

personnel.

WARNING While Linea Focus systems are in operaon, the following safety requirements must ! –

be strictly adhered to:

System Installaon and Set- up

• To reduce risk of injury, extreme care should be taken when operang the systems near

children.

• Make sure that the systems are rmly secured, especially when used with tripod stands.

Avoid sloping or unstable surfaces at all mes.

• Do not use the systems near water (e.g. sinks, swimming pools, or on wet ground).

• Keep the systems free from moisture, dust, lengthy or intensive exposure to sunlight and

vibraon.

• The systems should not be used near ovens, heaters or other heat-producing equipment, nor

should they be exposed to extremely low temperatures.

• The systems should be installed in such a way that opmum venlaon is guaranteed and

power outlets are within easy reach.

• Make sure that the systems cannot be tampered with, or fall over, and that no liquids can get

into the venlaon slots thus damaging internal components.

• Containers with liquid (i.e. glasses) should never be placed on top of the systems

Operaon

• Never go below the minimal load impedance of the connected amplier .

• When used in conjuncon with headphones or an external amplier, these systems can

produce volume levels that may potenally damage your hearing. Do not listen at high

volume levels for long periods. If you noce any deterioraon in your hearing, or whistling in

your ears, please consult your doctor.

• While in use, loudspeakers can be damaged through:

a) feedback from microphones

b) connuous high level, high frequency signals from electronic musical instruments

c) distorted, high level signals

d) popping noises that can occur if a device in the set-up is switched on, connected or

disconnected while the amplier is on

Connecon and cabling

• Cabling provides the vital link between all the components in an audio installaon, from

microphones and instruments to loudspeakers eir funcon is oen underesmated! . Th

• Please ensure that your cabling funcons faultlessly .

• When buying cables, please choose tread-resistant cabling with good quality connectors If .

required, we can supply appropriate cabling for your loudspeakers.

• Make sure that the distribuon for the mains voltage is intact.

• Using isolated or inadequately earthed distributors or power cables is forbidden!

• Care should also be taken when laying cables: For example, an unbalanced cable should not

be placed next to a lighng cable, but if necessary it can be laid at right angles in order to

minimize the risk of interference.

• All cables should be rmly xed to the oor using gaer tape.

• WARNING: No objects should be placed on the system’s power cable. Only use intact

power cables!

• The system must only be connected to a mains voltage supply that is compable with the

system itself .

• The power cable should be removed if the system is not going to be used for a while. Remove

holding the plug, not the actual cable.

Service und Guarantee

• The system should be referred to a qualied service engineer immediately if :

a) The power cable or connector is damaged.

b) A foreign body or liquid has go into the system interior. ne

c) The system has been exposed to rain.

d) The system is not working as normal, for instance if signicant changes in

performance are noceable.

e) The system has fallen over, or the housing is damaged.

• Do not perform any kind of servicing on the system outside of normal daily maintenance. Any

addional servicing must be carried out by suitably qualied service personnel.

• Keep all packaging in case the system needs to be returned for whatever reason. Using the

original packaging will minimize any potenal risk of damage during transportaon.

Specyfikacje produktu

Marka:	Atlas
Kategoria:	głośnik
Model:	ALS-LFI220
Kolor produktu:	Czarny
Rodzaj zasilania:	Prąd przemienny
Materiał obudowy:	Aluminium
Częstotliwość wejściowa AC:	50/60 Hz
Napięcie wejściowe AC:	100 - 240 V
Wysokość produktu:	2250 mm
Szerokość produktu:	130 mm
Głębokość produktu:	120 mm
Waga produktu:	15000 g
Rekomendowane użycie:	Uniwersalne
Technologia łączności:	Przewodowa
Bluetooth:	Nie
Moc wyjściowa (RMS):	1600 W
Pobór mocy w trybie czuwania:	5 W
Kanały wyjścia audio:	- kan.
Klasa wzmacniacza:	D
Stosunek sygnału do szumu:	130 dB
Zasięg częstotliwości:	60 - 17000 Hz
Rozmieszczenie głośników:	Stand-mountable, Wall-mountable
Ilość przetworników:	16
Średnica sterownika:	101 mm
Wzmacniacz:	Wbudowany
Czułość:	112 dB
Moc RMS głośników:	1600 W
Kąt promieniowania:	90 - 110 °
Moc wyjściowa wzmacniacza:	100 W
Liczba wzmacniaczy:	16