Instrukcja obsługi Atlantic FS3

Atlantic głośnik FS3

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Atlantic FS3 (4 stron) w kategorii głośnik. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/4
FS3
Slim Profile Front Stage Loudspeaker
Specications for the FS3
Specications for the FS3
Specications for the FS3
Specications for the FS3Specications for the FS3
Type Sealed-box, 2-way front stage Le, Center, Right
Drivers: Woofers (2) 31/2˝ CPP per channel
Tweeter (1) 3/4˝ silk dome tweeters per channel
Frequency Response 100Hz - 20kHz (± 3dB)
Nominal Impedance 6 Ohms
Crossover Frequency 3.5kHz
Sensitivity 88dB
Recommended Amplier Power 10-125 Watts
Dimensions 42˝ x 43/4˝ x 3˝ (1068mm x 120mm x 76mm) w/grille
Weight (each, unpacked) 13.5 lbs; 6.1kg
Specications are those in effect at the time of printing. Atlantic Technology reserves the right to change specications or
appearance at any time without notice.
Dolby Digital, AC-3, 5.1, Dolby Stereo and Dolby Pro Logic are trademarks of Dolby Laboratories Licensing Corporation.
DTS is a registered trademark of DTS Inc.
343 Vanderbilt Avenue Norwood, MA 02062
(781) 762-6300
www.atlantictechnology.com
Figure 2: Typical wiring diagram for speakers in a home theater.
Warning: Before turning on the amplier, be certain that no stray wire strands
are touching across the two terminals as this might damage your amplier.
Finally, check the polarity of your front speakers by listening to some music. If the
sound seems hollow, unusually spread out, or has weak bass, recheck your connec-
tions for proper polarity. If necessary, reverse any out of phase connections. Only
one speaker wired out of phase is usually the culprit.
FS3
Slim Profile Front Stage
Loudspeaker
ank you for choosing Atlantic Technology
home theater products. Your new speaker system
is precision craed to give you years of enjoyable,
trouble free service. is manual covers the At-
lantic Technology FS3 Front Stage Loudspeaker.
e FS3 contains the Le, Center and Right
video display either on a shelf, mounted on the
wall or attached to an articulating TV mount.
Each FS3 consists of a low resonance MDF cab-
inet, dual 3.5˝ CPP drivers, 3/4˝ silk dome tweeter
and high quality crossover components for each
of the three front channels. e FS3 is designed
for use with all surround formats such as Dolby
Digital, DTS or Dolby Atmos.
Con
Con
Con
ConConnec
nec
nec
necnecting
ting
ting
ting ting Y
Y
Y
YYour Sy
our Sy
our Sy
our Syour System
stem
stem
stemstem
We recommend that you connect your FS3
speaker systems with high quality dual conduc-
tor stranded wire of 18 gauge or larger, for
lengths up to 25 feet. Use 16 gauge dual conduc-
tor or larger for longer runs of wire. Contact
your local audio/video specialist for specic
cable recommendations and further informa-
tion for special circumstances.
Warning: To prevent risk of electrical shock
or damage to your equipment, always
switch off the amplier or receiver when
making connections to the speaker.
You can connect your FS3 speakers by using a
variety of audio connectors, or you can:
Strip about 1/2˝ (13mm) of insulation from the
connecting insulation from the connecting wires.
Connect them to the appropriate push terminal,
being careful to observe polarity (positive to the
red terminal, negative to the black terminal).
Whether you are connecting a complete FS3
system, or adding a single speaker component
to your present system, the wiring should look
like the diagram in Figure 2.
Figure 1: Gold plated spring binding posts
accept up to 14 gauge bare wire.
You can also
wall mount the
speaker using the
keyhole brackets
built into the back
of the speaker. Be sure
to anchor the speaker
properly to avoid damaging
your walls or the speaker.
e Shelf-2405 is another great
option for the FS3. e Shelf-2405
is a kit that consists of a pair of metal
shelves that t on top of a at panel display.
Check out www.atlantictechnology.com
under “soundbars” for more information.
Pla
Pla
Pla
PlaPlace
ce
ce
cecemen
men
men
menment a
t a
t a
t at and
nd
nd
ndnd
Ope
Ope
Ope
OpeOperati
rati
rati
ratiratio
o
o
oon
n
n
nn
e slim prole design of the FS3 allows it to easily blend in when mounted
above or below a at panel display. e speaker can be mounted most simply by
using the 4 self-adhesive feet included in the accessory bag, and placing the speaker
on a sturdy shelf or table.
FS3 shown on the
Shelf-2405.
Typical arrangement for speakers in a home theater. For best results, place the sur-
round speakers within the shaded area. Note that the surround speakers are marked
Le and Right. It is important that the speakers be placed correctly for proper imaging.
M
M
M
MMoun
oun
oun
ounountin
tin
tin
tinting
g
g
gg
e FS3 speakers can be mounted in a variety of ways:
At
At
At
AtAttaching an
taching an
taching an
taching antaching an FS3 to a at-
FS3 to a at-
FS3 to a at-
FS3 to a at- FS3 to a at-screen mount or ar
screen mount or ar
screen mount or ar
screen mount or arscreen mount or articulating moun
ticulating moun
ticulating moun
ticulating mounticulating mount
t
t
tt:
:
:
::
Check with the manufacturer of your atscreen wall bracket. Most manufacturers
offer an optional hardware kit to allow for mounting a sound bar to the TV mount.
e FS3 features a pair of 1/4-20 threaded inserts in the back of the cabinet. Use
1/4-20 screws to attach the speaker to the bracket.
On the wall:
On the wall:
On the wall:
On the wall:On the wall:
To mount your speakers on a wall, we have installed metal key-hole brackets on the
back of the FS3 speakers. Be sure to use a strong screw whose head and sha will
t within the keyhole opening and slot. Also be sure to drive the screw well into a
stud or use a mounting device (such as a molly-bolt) that is capable of holding the
weight of the speaker. Never simply drive a nail or screw into a sheet rock or other
wall materials. Always follow the above guidelines for safe speaker mounting.
On a table or shelf
On a table or shelf
On a table or shelf
On a table or shelfOn a table or shelf:
:
:
::
Adhesive rubber feet are included.
Liste
Liste
Liste
ListeListening Levels
ning Levels
ning Levels
ning Levelsning Levels and
and
and
and and P
P
P
PPower
ower
ower
ower ower
Handli
Handli
Handli
HandliHandling
ng
ng
ng ng – IMP
– IMP
– IMP
– IMP– IMPORT
ORT
ORT
ORTORTA
A
A
AANT!
NT!
NT!
NT!NT!
e power recommendation for these speaker
components assumes that you will not operate
your amplier/receiver in a way that produces
distortion. Even rugged speakers like FS3 can be
damaged by a moderately powered system driven
beyond its intended capacity. e harsh amplier
clipping that occurs in this situation will cause
damage to the speaker system. is type of dam-
age is easily identiable through examination of
the damaged speaker’s voice coil and is not cov-
ered by the warranty. e FS3 will play very
loudly when provided with enough clean power
to do so. Again, consult your dealer or Atlantic
Technology for additional information.
Car
Car
Car
CarCare and F
e and F
e and F
e and Fe and Feeding
eeding
eeding
eeding eeding of
of
of
of of Y
Y
Y
YYour Speake
our Speake
our Speake
our Speakeour Speakers
rs
rs
rsrs
Clean your speaker cabinets using a so cloth
moistened with a mild, non-abrasive glass cleaner
being careful not to wet the edges of the cabinet.
Also, be careful not to get any cleaning uids on
the driver cones or domes. It may be best to
dampen the cloth with the cleaner and then wipe
the speakers. Use a so cloth, but do not use any
paper products, because no matter how so they
may feel, they will scratch the nish. Aer care-
fully removing the grilles from the speakers, clean
them with a quick pass from a vacuum cleaner
with a brush attachment. is should remove any
dust accumulation. Avoid placing your speakers
in direct sunlight or near a source of heat that
may, over time, damage thenish.
Impor
Impor
Impor
ImporImportant:
tant:
tant:
tant: tant: Sav
Sav
Sav
SavSave Y
e Y
e Y
e Ye Your Bo
our Bo
our Bo
our Boour Boxes!
xes!
xes!
xes!xes!
If possible, save the cartons, packing pieces,
and plastic bags that came with your speak-
ers. ey will be useful in case you move or
have to ship your loudspeakers for any rea-
son. In any case, save all packing materials
until you are certain that the systems have
suffered no damage in shipment. If you nd
such damage, either visible or internal, con-
tact your dealer immediately for the proper
return procedure.
Figure 3

Specyfikacje produktu

Marka: Atlantic
Kategoria: głośnik
Model: FS3

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Atlantic FS3, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje głośnik Atlantic

Atlantic

Atlantic LCR2 Instrukcja

22 Września 2024
Atlantic

Atlantic H-PAS AT-2 Instrukcja

6 Września 2024
Atlantic

Atlantic 4400 THX Select Instrukcja

6 Września 2024
Atlantic

Atlantic TLC-8.3 Instrukcja

4 Września 2024
Atlantic

Atlantic LCR3 Instrukcja

4 Września 2024
Atlantic

Atlantic 2400 Instrukcja

30 Sierpnia 2024
Atlantic

Atlantic TLC-8.2 Instrukcja

26 Sierpnia 2024
Atlantic

Atlantic FS-7.1 Instrukcja

25 Sierpnia 2024
Atlantic

Atlantic IWTS-10 LCR Instrukcja

25 Sierpnia 2024
Atlantic

Atlantic FS3 Instrukcja

24 Sierpnia 2024

Instrukcje głośnik

Najnowsze instrukcje dla głośnik

Bowers & Wilkins

Bowers & Wilkins LCR3 Instrukcja

15 Stycznia 2025
Hifonics

Hifonics Vulcan VX6.2E Instrukcja

15 Stycznia 2025
Pyle

Pyle PLRGSW64BK Instrukcja

15 Stycznia 2025
ION

ION Insta Sound Instrukcja

15 Stycznia 2025
Pure Acoustics

Pure Acoustics QBT-340 Instrukcja

15 Stycznia 2025
Yamaha

Yamaha WX-010 Instrukcja

15 Stycznia 2025
Polk

Polk REACT SOUND BAR 1 Instrukcja

15 Stycznia 2025
Sennheiser

Sennheiser AMBEO Soundbar Plus SB02M Instrukcja

15 Stycznia 2025
Klipsch

Klipsch Reference RB-25 Instrukcja

15 Stycznia 2025
Klipsch

Klipsch Reference RB-35 Instrukcja

15 Stycznia 2025