Instrukcja obsługi Asus PL-N12

Asus adapter sieciowy PL-N12

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Asus PL-N12 (2 stron) w kategorii adapter sieciowy. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/2
Router
W
AN LAN
Powerline
Internet
PL-E41
PL-N12
Quick Start Guide
PL-N12 Kit
300Mbps AV500 Wi-Fi PowerLine Extender
¨
Applicable to PL-N12 and its multiple-pack kits.
This QSG uses PL-E41 powerline adapter to work with PL-N12 powerline extender.
NOTE: Use the same steps to set up more
Wi-Fi powerline devices.
Plug-n-Play
Setting up your wireless network
PL-N12 Kit includes:
• PL-N12 Wireless-N300 Wi-Fi PowerLine
• PL-E41 Homeplug AV 500Mbps PowerLine Adapter
1. Place your PL-N12 next
to your router, and turn
both devices on.
2. Press the WPS button on
your router.
Wi-Fi Clone (optional)
Use your router’s wireless network name and password to your
PL-N12 settings.
3. Press the Clone
button on your
PL-N12.
Your extender blinks
slowly for a few seconds
4. Your PL-N12 and your router
now have the same wireless
network name and password.
NOTE: If Wi-Fi Clone succeeds, move your PL-N12 to your preferred
location. If it fails, follow the steps in PL-N12 Wireless Settings.
Have fun!
Model No. PL-N12 Your Configuration
Customized Wireless Network Name
Customized Wireless Password
NOTE: Wait until the powerline and
power LEDs turn on.
To connect devices to your PL-N12 Wi-Fi powerline,
refer to the Wi-Fi information sticker for the default
network name (SSID) and password.
To customize your PL-N12 network name (SSID)
and password, refer to the section PL-N12 Wireless
Settings.
Pair button (optional)
Pairing devices via the Pair button
Use the Pair button to create a secure powerline network, and add up to 16 powerline devices to this network.
Creating a secure powerline network
1. Press the Pair/Reset button on your
PL-E14.
2. Press the Pair button on your PL-N12.
WaituntilthepowerlineLEDlights
up,indicatingthatasecurepowerline
network has been created.
Joining a secure powerline network
1. Press the Pair button on a powerline device in the powerline network. 2. Press the Pair button on another extend-
er.WaituntilthepowerlineLEDlightsup,
indicatingthatpairingissuccessful.
PL-N12 Wireless Settings (optional)
1. Set up your PL-N12 via wired or wireless connection. For details, refer to the section
Plug-n-Playonthepreviouspage.
2. Go to http://ap.asus.com
3. Use admin as both the username and password.
4. Go to Wireless General > and set the SSID (network name) and password.
5. When done, click .Apply
Frequently Asked Questions (FAQs)
Q1: How do I reset my PL-N12?
With your PL-N12 switched on, use a pin to press and hold the Reset button until the
Wi-FiLEDstartsblinking.WhenthepowerLEDturnsgreenandtheWi-FiLEDison,the
reset process is completed.
Q2: My devices cannot connect to the Internet.
• CheckyourInternetconnection.
• EnsurethatthepowerlineLEDlightsuponallyourpowerlinedevicesinthe
network.Iftheydonot,trypairingthedevicesagain.
• Ensurethatallyourdevicesareinthesamenetwork.
• Ensurethatalltheextendersandadaptersareinthesameelectricalcircuit.
Q3: My successfully-paired PL-N12 does not work after I moved it to a new
location.
• Ensurethatalltheextendersandadaptersareinthesameelectricalcircuit.
• Trytopairyourextenderwithyouradapteragain.Fordetails,seePairing devices
via the Pair button.
• Checkforanypossibleinterferencesthatmaybetooclosetoyourextenders
oradapterssuchasairconditioners,washingmachines,andotherelectrical
appliances.
• Ensurethatallyourdevicesareinthesamenetwork.
LEDs and buttons
Ethernet port
Pair/Reset
button
Power LED
Ethernet LED
Powerline LED
Reset button
Pair button
Clone button
Power switch
Ethernet ports
Power LED
Ethernet LED
Powerline LED
Wi-Fi LED
PL-E41 Adapter PL-N12 Extender
IMPORTANT!EnsurethatyouplugPL-N12/PL-E41to
wall outlets in the same electrical circuit.
LED STATUS DESCRIPTION
Power On/Off Your PL-N12 is on/off.
Whenswitchedon,thepowerLEDturnsfromredtogreen
inaboutoneminute,indicatingthatitisreadytouse.
Blinking Blinkingeverysecond:Pairingisinprogress.
Powerline On The device is connected to one or more powerline devices.
Off The device is not connected to any powerline devices.
Blinking InPower-Savingmode,thepowerlineLEDblinksevery15
seconds.
Ethernet On/Off A device is connected or not connected to the Ethernet
port.
Blinking ThepowerlineadapteristransferringdataviatheEthernet
port.
Wi-Fi Blinkingrapidly YourPL-N12iscloningtheparentAP’sSSIDandpassword.
Blinkingeveryve
seconds
YourPL-N12isresettingtothefactorydefaultsettings.
BUTTON DESCRIPTION
Clone PressandholdthebuttonforaboutonesecondtostartcloningtheparentAP’sSSID
and password.
Pair Pressandholdthebuttonforaboutonesecondtostartthepairingprocess.
Reset Press and hold the button for about five seconds to restore the PL-N12 to the factory
defaultsettings.
Blinking
On
Blinking
Blinking
On

Specyfikacje produktu

Marka: Asus
Kategoria: adapter sieciowy
Model: PL-N12

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Asus PL-N12, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje adapter sieciowy Asus

Asus

Asus PL-AC56 Kit Instrukcja

23 Sierpnia 2024
Asus

Asus PL-E52P Duo Instrukcja

21 Sierpnia 2024
Asus

Asus PL-X52P Instrukcja

15 Sierpnia 2024
Asus

Asus PL-N12 Instrukcja

14 Sierpnia 2024

Instrukcje adapter sieciowy

Najnowsze instrukcje dla adapter sieciowy

Planet

Planet PL-104U-EU Instrukcja

14 Stycznia 2025
Devolo

Devolo DdLAN 650+ Instrukcja

13 Stycznia 2025
Netgear

Netgear XAV5601 Instrukcja

12 Stycznia 2025
AVM

AVM FRITZ!Powerline 1000E Instrukcja

30 Grudnia 2025
AVM

AVM FRITZ!Powerline 510E Set Instrukcja

30 Grudnia 2025
AVM

AVM FRITZ!Powerline 1220 Set Instrukcja

30 Grudnia 2025
D-Link

D-Link DHP-329AV Instrukcja

29 Grudnia 2024
D-Link

D-Link DHP-P307AV Instrukcja

23 Grudnia 2024
D-Link

D-Link DHP-W307AV Instrukcja

23 Grudnia 2024
D-Link

D-Link DHP-310AV Instrukcja

19 Grudnia 2024