Instrukcja obsługi Astar LTV-27HBG

Astar Telewizja LTV-27HBG

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Astar LTV-27HBG (52 stron) w kategorii Telewizja. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/52
Dear ASTAR Customer,
Congratulations on your new ASTAR 27''HDTV High Definition LCD
Television purchase.
Thank you for your support. For maximum benefit of your set, please
read these instructions before making any adjustments, and retain
them for future reference. We hope you will experience years of
enjoyment from your new ASTAR 27''HDTV High Definition
Television.
For assistance, please call 1
To purchase or inquire about accessories and installation services for
your ASTAR LCD TV, please visit our website at
1
We recommend you register your ASTAR 27'' HDTV either at
our website
Write down your Serial Number located on the back of your 27''HDTV.
S/N:
Purchase Date
-877-851-2528.
-877-851-2528.www.astarelectronics.com or call
www.astarelectronics.com or fill in your registration
card and mail it in. For peace of mind and to protect your
investment beyond the standard warranty, ASTAR offers on-site
extended warranty service plans. These plans give you additional
coverage during the standard warranty period. Visit our website
or call us to purchase a plan.
D
D
D
D
D
D
D
D
D
D
www.astarelectronics.com
1
This product is designed and manufactured to operate within defined design limits, and misuse may result
in electric shock or fire. To prevent the product from being damaged, the following rules should be
observed for the installation, use and maintenance of the product. Read the following safety instructions
before operating the display. Keep these instructions in a safe place for future reference.
* To avoid the risk of electric shock or component damage, switch off the power before connecting other components to
the LCD TV.
*Unplug the power cord before cleaning the LCD TV. A damp cloth is sufficient for cleaning the LCD TV. Do not use a
liquid or a spray cleaner for cleaning the product. Do not use abrasive cleaner.
*Always use the accessories recommended by ASTAR to insure compatibility.
*When moving the LCD TV from an area of low temperature to an area of high temperature, condensation may form on
the housing. Do not turn on the LCD TV immediately after this to avoid causing fire, electric shock or component damage.
*Do not place the LCD TV on an unstable cart, stand, or table. If the LCD TV falls, it can injure a person and cause serious
damage to the appliance.
* A distance of at least 3 feet should be maintained between the LCD TV and any heat source, i.e. radiator, heater,
oven, amplifier etc. Do not install the product close to smoke. Operating the product close to smoke or moisture may
cause fire or electric shock.
*Slots and openings in the back and bottom of the cabinet are provided for ventilation. To ensure reliable operation of the
LCD TV and to protect it from overheating, be sure the opening are not blocked or covered. Do no place the LCD TV in a
bookcase or cabinet unless proper ventilation is provided.
*Never push any object into the slot on the LCD TV cabinet. Do not place any objects on the top of the product. It could
short circuit parts causing a fire or electric shock. Never spill liquids on the LCD TV.
*The LCD TV should be operated only from the type of power source indicated on the label. If you are not sure of the type
of power supplied to your home, consult your local power company.
*The power cable must be replaced when using different voltage from that specified in the User Manual. For more
information, contact ASTAR.
*The LCD TV is equipped with a three-pronged grounded plug, a plug with a third (grounding) pin. This plug will fit only
into a grounded power outlet as a safety feature. If your outlet does not accommodate the three-wire plug, have an
electrician install the correct outlet, or use an adapter to ground the appliance safely. Do not defeat the safety purpose
of the grounded plug.
*Do not overload power strips and extension cords. Overloading can result in fore or electric shock.
*The wall socket should be installed near the equipment and should be easily accessible.
*Do not touch the power cord during lightning. To avoid electric shock, avoid handling the power cord during electrical
storms.
*Unplug the unit during a lightening storm or when it will not be used for long period of time. This will protect the LCD TV
from damage due to power surges.
*Do not attempt to repair or service the product yourself. Opening or removing the back cover may expose you to high
voltages, the risk of electric shock, and other hazards. If repair is required, please contact ASTAR and refer all servicing
to qualified service personnel.
*Keep the product away from moisture. Do not expose this appliance to rain or moisture. If water penetrates into the
product, unplug the power cord and contact ASTAR. Continuous use in this case may result in fire or electric shock.
*Do not use the product if any abnormality occurs. IF any smoke or odor becomes apparent, unplug the power cord and
contact ASTAR immediately. Do not try to repair the product yourself.
*Avoid using dropped or damaged appliances. If the product is dropped and the housing is damaged, the internal
components may function abnormally. Unplug the power cord immediately and contact ASTAR for repair. Continued use
of the product may cause fire or electric shock.
*Do not install the product in an area with heavy dust or high humidity. Operating the product in environments with heavy
dust or high humidity may cause fire or electric shock.
*Hold the power connector when removing the power cable. Pulling the power cable itself may damage the wires inside
the cable and cause fire or electric shock. When the product will not be used for an extended period of time, unplug the
power connector.
*To avoid risk of electric shock, do not touch the connector with wet hands.
*Insert batteries in accordance with instructions while using the remote control. Incorrect polarities may cause damage
and leakage of the batteries, operator injury and contamination of the remote control.
*If any of the following occurs, please contact ASTAR:
*The power connector fails or fray.
*Liquid sprays or any object drops into the LCD TV.
*The Display is exposed to rain or other moisture.
*The Display is dropped or damaged in any way.
*The performance of the Display changes substantially.
*Operating environment: Temperature :40°F~95°F,Humidity:10% to 90% non-condensing, Altitude:0~10.000ft.
THIS PRODUCT HAS BEEN TESTED AND FOUND TO COMPLY WITH REGULATORY SAFETY CERTIFICATIONS.
www.astarelectronics.com
2
Note: In some countries or regions, the shape of the power plug and power outlet may sometimes differ
from that shown in the explanatory drawings. However, the method of connecting and operating the unit
is the same.
If an outside antenna/satellite or cable system is to be connected to the LCD TV, make sure that the
antenna/satellite or cable system is electrically grounded to provide some protection against voltage
surges and static charges.
For added protection of your LCD TV during a lightning storm or when it is left unattended or unused for
long periods of time, unplug the LCD TV from the wall outlet and disconnect the antenna/satellite or cable
system.
Do not locate the antenna near overhead light or power circuits, or where it could fall into such power lines
or circuits.
Television Antenna Connection Protection
Article 810 of the National Electrical Code, ANSI/NFPSA 70, provides information with regard to proper
grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit,
size of the grounding conductors, location of antenna discharge unit, connection to grounding electrodes,
and requirements of the grounding electrode.
External Television Antenna Grounding
Lightning Protection
Power Lines
GROUND CLAMP
ELECTRIC SERVICE EQUIPMENT
GROUND CLAMPS
ANTENNA LEAD-IN WIRE
ANTENNA DISCHARGE UNIT(NEC SECTION 810-21)
POWER SERVICE GROUNDING
ELECTRODE SYSTEM (NEC ART 250,PARTH)
GROUNDING CONDUCTOR(NEC SECTION 810-21)
www.astarelectronics.com
3

Specyfikacje produktu

Marka: Astar
Kategoria: Telewizja
Model: LTV-27HBG

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Astar LTV-27HBG, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Telewizja Astar

Astar

Astar LTV-27HBG Instrukcja

25 Września 2024
Astar

Astar LTV-19BG Instrukcja

25 Września 2024
Astar

Astar LTV-40HBG Instrukcja

25 Września 2024
Astar

Astar LTV-26HBG Instrukcja

25 Września 2024

Instrukcje Telewizja

Najnowsze instrukcje dla Telewizja

Samsung

Samsung QN85QN800AF Instrukcja

15 Października 2024
Thomson

Thomson 24TM2490 Instrukcja

15 Października 2024
Daewoo

Daewoo DSJ-5520 Instrukcja

15 Października 2024
Sharp

Sharp LC-52D65U Instrukcja

15 Października 2024
Medion

Medion MD30348 Instrukcja

15 Października 2024
Hisense

Hisense 50A7100FTUK Instrukcja

15 Października 2024
Bauhn

Bauhn ATV24HDW-0224 Instrukcja

15 Października 2024
Bauhn

Bauhn ATV32HDW-0824 Instrukcja

15 Października 2024
Bauhn

Bauhn ATV75UHDW-0324 Instrukcja

15 Października 2024
Bauhn

Bauhn ATV70UHDW-0624 Instrukcja

15 Października 2024