Instrukcja obsługi Ascent 10FC

Ascent komputer rowerowy 10FC

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Ascent 10FC (2 stron) w kategorii komputer rowerowy. Ta instrukcja była pomocna dla 11 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/2

INTRODUCTION

Congratulations on your purchase of the Ascent

10FC Wireless cycle computer. Packed with all

the features that a professional rider needs to

keep track of a workout, the 10FC Wireless is a

perfect training tool for any cyclist. The added

convenience of wireless transmission makes

installation simple.

BUTTON FUNCTIONS

“A” BUTTON (BOTTOM)

Use this button to progress through the dis-

play screens and set-up screens.

“B” BUTTON

(

TOP)

Use this button to advance the digits while

programming the computer, and to activate

the Freeze Frame Memory feature.

COMPUTER FUNCTIONS

SPEEDOMETER (SPD) (M/hr or KM/hr)

Displays instantaneous speed. Accurate to

0.5m/h or KM/h

AUTOMATIC RIDE TIMER (ATM)

Stopwatch activated by front wheel move-

ment, records true ride time (time spent

actually riding) up to 9:59:59.

SPEED COMPARISON (+ or —)

Compares current speed to average speed.

As you ride, a (+) or (—) will appear in the

upper right hand corner of the display. This

will indicate whether your current speed is

faster (+) or slower (—) than your average

speed. This function is automatic, requires

no programming, and cannot be disabled.

TRIP DISTANCE (DST)

Displays the distance traveled during

current ride up to 999.9 mi. or km.

AVERAGE SPEED (AVS)

Displays average speed calculated using

your true ride time and trip distance.

ODOMETER (ODO)

Displays cumulative ride distance up to

99,999 mi. or km.

MAXIMUM SPEED (MXS)

Displays the fastest speed attained during a ride.

CLOCK

Displays time of day in a 12 hour format.

AUTO SLEEP

To prolong battery life, the 10FC will automatically enter “sleep” mode after 5-10 min-

utes of non-use. The computer will automatically restart itself as soon as it receives

input from the front wheel, or as soon as any of the buttons are pushed.

FREEZE FRAME MEMORY (Flashing Display)

This feature allows you to store a snapshot of the display for an extended period of time.

This feature is useful at the end of a race, allowing you to hold a record of your time, dis-

tance, average speed and maximum speed while continuing to collect data during your

cool-down. While the freeze frame feature is activated, the computer will continue to

receive data, but will not update the display information until the freeze frame feature is

deactivated.

ACTIVATE FREEZE FRAME MEMORY

In any mode, press and hold the top computer key (B) for approximately 1 second. The

entire display will flash, indicating the freeze frame feature is activated. You may now

toggle through the display screens by pressing the bottom computer key (A).

DEACTIVATE FREEZE FRAME MEMORY

Press the top computer key (B) to deactivate freeze frame memory and return to normal

operation. The display screens will automatically be updated.

RESET DISPLAY SCREENS

In the SPD / ATM display screen, press and hold both keys for 2 seconds to clear the

ATM, DST, AVS and MXS displays.

AUTO CLEAR BUTTON

Press the AC button on the back of the unit for total reset of the computer. All stored

data will be erased.

BATTERY INSTALLATION

The head unit of the 10FC Wireless uses a common

2032 3v lithium button cell battery. The transmitter uses

a common 23A 12v battery. Replacement batteries are

available at most camera and electronic shops. Under

normal usage a battery should last approximately one

year. NOTE: Most problems that occur with cycle com-

puters are caused by dead or weak batteries. If you are

having problems with your computer’s operation, check

and replace the battery first.

INSTALLATION OF HEAD UNIT BATTERY

STEP 1

Remove the battery cap from the bottom of the com-

puter using a small flat blade screwdriver.

STEP 2

Install the battery into the battery compartment with

the positive (+) side of the battery facing the battery

cap. Be careful when you are installing the battery

not to bend any of the battery contacts.

STEP 3

Press the battery cap firmly into place making sure that the

rubber o-ring does not get pinched or distorted, as this will

compromise the unit’s watertight seal.

INSTALLATION OF TRANSMITTER BATTERY

The transmitter should come from the factory with the 23A 12v

battery installed.

STEP 1

To replace the battery, first remove the battery cap on the top

of the transmitter with a coin. Remove the old battery and dis-

pose of properly. NOTE: Check the inside of the transmitter for

corrosion. If corrosion is visible replace the transmitter with a

new unit.

STEP 2

Install a new battery with the positive (+) end facing the cap, and reinstall the battery

cap. Make sure that the battery cap is tight to prevent moisture from entering the

transmitter unit. An improperly installed battery can damage the transmitter unit.

NOTE: To prolong the life of the head unit battery and transmitter battery, we recom-

mend removing the head unit from the handlebar bracket between rides.

PROGRAMMING THE COMPUTER

Now that you are familiar with the features of

your Ascent 10FC cycle computer, you are

ready to begin programming the unit specifical-

ly for your bike.

SELECTING MILES OR KILOMETERS

The Ascent 10FC Wireless is capable of dis-

playing speed and distance information in

either miles or kilometers. It is also possible to

change back and forth between miles and kilo-

meters by entering the programming mode at

any time, and changing your selection.

STEP 1

With the computer in the AVS / ODO display

screen, press and hold the bottom key (A)

for more than 2 seconds.

STEP 2

The screen will display the default wheel size setting of 2074mm (700 x 20C), and

the M/hr icon will flash. Press the top key (B) to select either miles (M/hr) or kilome-

ters (KM/hr).

STEP 3

Set your choice and advance to the wheel size set-up screen by pressing the bottom

key (A) again.

10FC Wireless Cycle

Computer Owner's Manual

Speedometer &

Automatic Ride

Timer Functions

Speed Comparison

& Trip Distance

Functions

Average Speed

& Odometer

Functions

Maximum Speed &

Clock Functions

Selecting Miles

or Kilometers

Selecting Miles

or Kilometers

"A" Button

(BOTTOM)

"B" Button

(TOP)

3032 3v Lithium Battery

2032 3v Lithium Battery

DETERMINING WHEEL SIZE

The Ascent 10FC Wireless computer uses wheel circumference (measured in millime-

ters) to calculate speed and distance. Note that while your computer can be pro-

grammed to +/- 1mm for total accuracy, discrepancies of as much as 50mm will not

have a significant effect on the accuracy of the unit for most normal rides. The following

chart lists the programming sizes for some of the most popular tire sizes currently in

use. These numbers are estimations which may not precisely match the circumference

of your wheel due to variations in tire size between brands and models.

WHEEL SIZE CALCULATION

If your specific tire size is not listed in the chart, follow these steps to measure wheel cir-

cumference.

STEP 1

Stand your bicycle upright. With your tire inflated to its proper pressure, rotate your

front wheel so that the valve is located at the bottom (6 o’clock position). Make a

mark on the floor to indicate the valve location.

STEP 2

Roll the bicycle forward in a straight line for one complete wheel revolution, until the

valve is again at the bottom. Make a mark on the floor to indicate the valve location.

STEP 3

Measure the distance between the marks in millimeters (1 inch = 25.4mm). This

value is your wheel circumference. Enter this value in the computer (see

“Programming Wheel Size”).

PROGRAMMING WHEEL SIZE

STEP 1

Once you select miles (M/hr) or kilome-

ters (KM/hr) and press the bottom key

(A), the computer will automatically

advance to the wheel size programming

screen.

STEP 2

The factory default setting is 2074 (700 x 20C). The right hand digit (4) will flash. Use

the top key (B) to adjust the value.

STEP 3

Press the bottom key (A) to set the value and advance to the next flashing digit (7).

STEP 4

Repeat this sequence until all digits have been set to the appropriate value.

STEP 5

Press the bottom key (A) one final time to enter the wheel size setting into memory,

and return to the AVS / ODO display screen.

SETTING THE CLOCK

The 10FC Wireless cycle computer is

equipped with a digital clock that displays

time of day in a 12 hour format.

STEP 1

With the computer in the MXS display

screen, press and hold the bottom key

(A) for 2 seconds.

STEP 2

The screen will clear and the hours will

flash. Advance the hours using the top

key (B). NOTE: Hold this key to quickly

advance the hours. Press the bottom key

(A) to set the value and advance to the

minutes setting.

Programming

Wheel Size

Display Showing

Clock Function

Setting the Clock

Function

Distance (in mm)

Valve Valve

26 x 1.7

26 x 1.9

27 x 1.0 700c Tubular

26 x 2.1 700 x 38c

26 x 2.0

700 x 25c

700 x 28c

700 x 32c

27 x 1-1/4

650 x 20c

700 x 23c

700 x 20c

650 x 23c

2035

2055

2075

2095

2140

2180

1945

1990

2124

2140

2155

2074 2170

2114 2130

TIRE SIZE TIRE SIZE TIRE SIZE

CIRC. CIRC. CIRC.

STEP 3

Advance the minutes using the top key (B). NOTE: Hold this key to quickly advance

the minutes. Press the bottom key (A) to set the value and return to the MXS display

screen.

MAGNET, SENSOR AND BRACKET INSTALLATION

WHEEL MAGNET, TRANSMITTER AND BRACKET INSTALLATION

Because the 10FC is wireless, attaching the unit to your bike is simple and straight for-

ward. Begin by attaching the mounting bracket and head unit to the handlebars.

STEP 1

Clamp the bracket around the handlebars and

tighten in place. The 10FC uses an offset brack-

et that is designed to be supported by the han-

dlebar stem when installed. It is NOT necessarily

designed to fit directly over the center of the han-

dlebar stem, especially if this causes the bracket

to be bent or deformed. Install the 10FC bracket

so that the stem provides support and a firm

platform for the computer. The Ascent 10FC

bracket fits standard 26.0 - 26.4mm diameter

road handlebars. Shims are provided to fit small-

er 25.4mm diameter mountain or road bars.

Make sure not to over tighten the bracket as this

may result in breakage. The bracket needs to be

tightened only enough to prevent rotation on the

handlebar during normal riding.

STEP 2

Loosely mount the 10FC transmitter to the lead-

ing edge of the right fork blade using the flat rub-

ber block and the 2 zip-ties provided. The battery

cap should face up. On some bikes it may be

necessary to use the angled spacer that is pro-

vided in place of the flat spacer, in order to get

the transmitter to line up correctly with the head

unit.

STEP 3

Attach the wheel magnet loosely to one of the

spokes on the right side of the wheel, and adjust

the alignment of the magnet and transmitter so

that the magnet passes the transmitter within 1-

2mm of the small molded line near the top of the

transmitter case.

STEP 4

Once the transmitter and wheel magnet are aligned properly, securely tighten both in

place.

HEAD UNIT INSTALLATION

The head unit of the 10FC Wireless computer is designed to lock into the bracket. When

installing the head unit in the bracket, you should hear an audible “SNAP” indicating that

the unit is locked firmly in place. The head of the 10FC slides into the bracket from the

back to the front. NOTE: Because the 10FC is a wireless cycle computer, it will operate

even when the head unit is not fully secured in the bracket. BE SURE THAT THE HEAD

UNIT IS FULLY LOCKED IN PLACE IN THE BRACKET BEFORE USING THE UNIT.

TEST OF INSTALLATION

Once you complete the installation procedure, test the unit to make sure that it works.

STEP 1

Advance the computer to the SPD / ATM display screen.

STEP 2

Pick up the front of the bicycle and spin the front wheel. The computer should regis-

ter speed within 1-2 seconds. If you do not get a speed reading, check to be sure

that the wheel magnet and transmitter are aligned correctly, and that the space

between the magnet and transmitter is 1-2mm or less. Adjust as necessary and re-

test.

Correct

Incorrect

IncorrectCorrect

IncorrectIncorrect

Chapel Hill, NC Made in China, V.1 – April 2002

2 mm

Specyfikacje produktu

Marka:	Ascent
Kategoria:	komputer rowerowy
Model:	10FC

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Ascent 10FC, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje komputer rowerowy Ascent

Ascent IO Instrukcja

3 Lipca 2024

Ascent 10FC Instrukcja

3 Lipca 2024

Ascent Delta V Instrukcja

1 Lipca 2024

Instrukcje komputer rowerowy

Najnowsze instrukcje dla komputer rowerowy

BBB BCP-35W Instrukcja

12 Października 2024

Wahoo Elemnt Roam v2 Instrukcja

9 Października 2024

VDO R4 Instrukcja

7 Października 2024

VDO R5 Instrukcja

7 Października 2024

Sigma Eox View 1700 Instrukcja

7 Października 2024

IGPSport BSC100 Instrukcja

7 Października 2024

IGPSport iGS800 Instrukcja

7 Października 2024

Lezyne Super Instrukcja

5 Października 2024

Crivit HG01734A Instrukcja

4 Października 2024

Cateye Quick CC-RS100W Instrukcja

3 Października 2024