Instrukcja obsługi ART USB Dual Pre Project Series

ART system hi-fi USB Dual Pre Project Series

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla ART USB Dual Pre Project Series (12 stron) w kategorii system hi-fi. Ta instrukcja była pomocna dla 13 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/12
USB Dual Pre
User’s Manual
IMPORTANT SAFETY INSTRUCTION – READ FIRST
This symbol, whenever it appears, This symbol, wherever it appears, alerts you
alerts you to the presence of uninsulated to important operating and maintenance
dangerous voltage inside the enclosure-voltage instructions in the accompanying literature.
that may be sufficient to constitute a risk of shock. Please read the manual.
Read instructions:
Retain these safety and operating instructions for future reference. Heed all warnings printed here and on the
equipment. Follow the operating instructions printed in this user manual.
Do not open:
There are no user serviceable parts inside. Refer any service work to qualified technical personnel only.
Power sources:
Connect the units power supply to mains power only of the type described in this user manual or marked on
the power supply.
Power supply:
Use the power supply with sealed mains plug appropriate for your local mains supply as provided with the
equipment. If the provided supply does not fit into your outlet consult your service agent. Route the power cord
so that it is not likely to be walked on, stretched or pinched by items placed upon or against it.
Grounding:
Do not defeat the grounding and polarization means of the power supply.
Moisture:
To reduce the risk of fire or electrical shock do not expose the unit to moisture or use in damp or wet condi-
tions. Do not place container of liquid on unit.
Heat:
Do not locate the unit close to excessive heat or direct sunlight, as this could cause a fire hazard. Locate the
unit away from any equipment, which produces heat such as: power supplies, power amplifiers and heaters.
Environment:
Protect from excessive dirt, dust, heat, and vibration when operating and storing. Avoid tobacco ash, drink
spillage and smoke, especially that associated with smoke machines.
Handling:
Protect the controls from damage during transit. Use adequate padding if you need to ship the unit. To avoid
injury to yourself or damage to the equipment, take care when lifting, moving, or carrying the unit.
Servicing:
Unplug power immediately if equipment is exposed to moisture, the power supply becomes damaged during a
lightning storm or if smoke odor or noise is noted. Refer servicing to qualified technical personnel only.
Installation:
Install the unit in accordance with the instructions printed in the user manual.
INTRODUCTION:
The USB Dual Pre is a full-featured high quality dual portable preamplifier and computer interface
packed into a compact rugged case. It is designed to work over a wide variety of applications from
remote field recording to desktop/studio tracking. Each of the two low noise input channels has up to
48 dB of clean gain with signal present and clip LED indicators. Inputs can be either XLR balanced or
1/4-inch TRS. Each of the 1/4-inch TRS outputs is buffered low impedance balanced.
The USB Dual Pre can be externally powered from the mains via a wide range of external power
adapters, or from an internal 9 Volt battery, or from the USB bus itself, or any combination of these
power sources. When running off of the battery alone, you should get in excess of 50 hours of opera-
tion when phantom power is off. Battery life drops to around 20 hours (depending on microphone)
when phantom powering from the battery alone (still enough time to get through a session).
The built-in low noise +48 Volt phantom power supply allows you to power up to 2 microphones as
well as the preamplifier when running from any power sources including the USB bus.
For monitoring, an 1/8-inch TRS mini headphone jack with level and monitor mix controls on the rear
allow for latency free local monitoring of the inputs while recording as well as playback monitoring of
the USB bus. The monitor mix is also routed to the ¼-inch TRS balanced outputs. This lets you use
the 1/4-inch outputs as either a preamplifier out or as the monitor feed to your powered monitors.
The USB interface is fully compliant with the USB 1.1 specification and uses USB adaptive mode for
playback and USB asynchronous mode for record. It will work with the USB audio device drivers built
into Windows 98SE/ME/2000/XP/Vista 32bit and Apple OS9.1/OSX computers with native USB
support. No special drivers are needed.
The compact black anodized all aluminum case with rubber sides makes for a rugged design. The
USB Dual Pre will provide years of trouble free service and its high quality audio channels and
versatile powering options make the USB Dual Pre the obvious choice in a wide variety of applica-
tions from Podcasting/Broadcasting to Tracking and Monitoring.
With the USB Dual Pre, your laptop, and a pair of quality microphones you can do some serious
remote recording.
Key Features Include:
• USB Connectivity to Desktop and Laptop Computers
• Low Noise Fully Balanced XLR and 1/4-inch TRS “Combo” Inputs
• Up to 48 dB of Clean Gain
• Built-in Low Noise +48 Volt Phantom Power Supply
• Latency Free Monitoring Mix and Level Controls
• Independent Channel Gain Controls
• 1/4-inch TRS Balanced Monitor and 1/8-inch Headphone Monitor Outputs
• Includes Recording & Production Software
• Compact, Stackable all Aluminum Chassis
• Flexible 3-way Power from USB, External Supply, or 9 Volt Battery

Specyfikacje produktu

Marka: ART
Kategoria: system hi-fi
Model: USB Dual Pre Project Series

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z ART USB Dual Pre Project Series, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje system hi-fi ART

ART

ART USBMix6 Instrukcja

27 Września 2024
ART

ART HQ-231 Instrukcja

25 Września 2024
ART

ART Patch In Instrukcja

13 Września 2024
ART

ART USB Dual Pre Project Series Instrukcja

5 Lipca 2024

Instrukcje system hi-fi

Najnowsze instrukcje dla system hi-fi

AKAI

AKAI EIE Pro Instrukcja

13 Października 2024
Sharp

Sharp XL-540H Instrukcja

11 Października 2024
Kenwood

Kenwood M-9000S Instrukcja

10 Października 2024
GoGen

GoGen MSC 472 BTDAB Instrukcja

9 Października 2024
Morel

Morel SUB-10X Instrukcja

9 Października 2024
Morel

Morel USUB 803 Instrukcja

9 Października 2024
Morel

Morel Soundsub PSW8e-w Instrukcja

9 Października 2024
Morel

Morel Sopran 934 Instrukcja

9 Października 2024
NAD

NAD M10 V3 Instrukcja

9 Października 2024
NUVO

NUVO NV-MPS4-E Instrukcja

8 Października 2024