Instrukcja obsługi ART MX524

ART Konsola miksująca MX524

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla ART MX524 (16 stron) w kategorii Konsola miksująca. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/16

MX524

FIVE CHANNEL FOUR ZONE

FIVE CHANNEL FOUR ZONE FIVE CHANNEL FOUR ZONE MIC/LINE MIXER

MIC/LINE MIXER

MIC/LINE MIXER MIC/LINE MIXER

USER'S MANUAL

IMPORTANT SAFETY INSTRUCTIONS - READ FIRST

This symbol, wherever it appears, this symbol, wherever it appears,

alerts you to the presence of uninsulated alerts you to important operating and

dangerous voltages inside the enclosure maintenance instructions in the

that may be sucient to constitute a risk. accompanying literature. Please read

of shock the manual.

Read instructions Retain these safety and operating instructions for future reference. Heed

all warnings printed here and on the equipment. Follow the operating instructions printed in this

user guide.

Do not open There are no user serviceable parts inside. Refer any service work to qualied

technical personnel only.

Power sources Only connect the unit to mains power of the type described in this user guide

or marked on the rear panel. The power source must provide a good ground connection.

Power cord Use the power cord with sealed mains plug appropriate for your local main supply

as provided with the equipment. If the provided plug does not t into your outlet consult your

service agent. Route the power cord so that it is not likely to be walked on, stretched or pinched

by items placed upon or against.

Grounding Do not defeat the grounding and polarization means of the power cord plug. Do not

remove or tamper with the ground connection on the power cord.

Moisture To reduce the risk of re or electrical shock, do not expose the unit to rain, moisture

or use in damp or wet conditions. Do not place containers of liquid on it, which may spill into

any openings

Heat Do not locate the unit in a place close to excessive heat or direct sunlight, as this could

be a re hazard. Locate the unit away from any equipment which produces heat, such as power

supplies, power ampliers and heaters.

Environment Protect from excessive dirt, dust, heat, and vibration when operating and storing.

Avoid tobacco ash, drink spillage and smoke, especially that associated with smoke machines.

Handling Protect the controls from damage during transit. Use adequate padding if you need

to ship the unit. To avoid injury to yourself or damage to the equipment, take care when lifting,

moving or carrying the unit.

Servicing Switch off the equipment and unplug the power cord immediately if it is exposed to

moisture, spilled liquid or the power cord or plug becomes damaged during a lightning storm or

if smoke odor or noise is noted. Refer servicing to qualied technical personnel only.

Installation Install the unit in accordance with the instructions printed in the user guide.

INTRODUCTION

The ART MX524 Five Channel Four Zone Mic/Line Mixer is a versatile rack mount mixer that

combines Five independent input channels and routes them to four zone outputs. Channels one thru

four accept a balanced Line or Mic signal thru the Combo jack connector. CH5 accepts a line level

signal through RCA jacks. The unit has an independent selectable +48 Volt phantom power function

for channels one thru four. Channels one thru four can also accept unbalanced line-level signals. Each

channel has a level control and can be routed to any zone output. Separate level, bass and treble

controls adjust the sound of each input channel.

The ART MX524 may be used on stage, in the studio, or for permanent install applications including

conference rooms, corporate boardrooms, churches, restaurants, small clubs, health clubs and more.

A built-in power supply and triple high 19-inch rack mount format allows for easy installation and reliable

long-term operation.

Features

 Five input channels with individual level controls using XLR/Phono jacks with master level, bass

and treble controls

 CH1 Mic/Line Input (factory set) automatically ducks CH2 - CH5 outputs

 Balanced Mic/Line XLR inputs for channels one thru four

 Full +48V low-noise phantom power for channels one thru four mic inputs

 Front panel 1/8-inch stereo (TRS) mini-phone plug for Headphone monitoring

 Four sets of Euro Bloc connectors for the Zone outputs

 Telephone paging function

 Dc power back up

 Separate monitor outputs

 LED VU meter on all outputs

 Rear mount RCA Line inputs for additional audio inputs

 Rugged 3U rack-mount steel chassis with built-in power supply

 Perfect for stage, studio and permanent installations

 Three-year warranty

Unit Initial Setup

Before any audio connections are made, please review if the CH1 Mic/Line is needed as a main talk

over feature is for your application. The unit is factory setup for this feature. If you would prefer to use

Channels 1 thru 5 as just audio inputs then an internal jumper will need to be moved to disable the

feature. Please see the section labeled on page 11, “Dedicated CH1 Mic/Line Ducking and Rear Priority

Switch Function” to make this change.

Specyfikacje produktu

Marka:	ART
Kategoria:	Konsola miksująca
Model:	MX524

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z ART MX524, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje Konsola miksująca ART

ART MX624 Instrukcja

16 Września 2024

ART USBMix4 Instrukcja

10 Września 2024

ART EQ351 Instrukcja

6 Września 2024

ART MX622BT Instrukcja

30 Sierpnia 2024

ART 416 Instrukcja

30 Sierpnia 2024

ART MX821S Instrukcja

29 Sierpnia 2024

ART EQ-355 Instrukcja

21 Sierpnia 2024

ART MX524 Instrukcja

20 Sierpnia 2024

ART ProMIX Instrukcja

20 Sierpnia 2024

ART MacroMIX Instrukcja

9 Sierpnia 2024

Instrukcje Konsola miksująca

Najnowsze instrukcje dla Konsola miksująca

American Audio Q-D6 Instrukcja

15 Stycznia 2025

ADB ME1163 Instrukcja

15 Stycznia 2025

Samson L1200 Instrukcja

14 Stycznia 2025

Samson MDR624 Instrukcja

14 Stycznia 2025

Konig KN-DIGICON20 Instrukcja

11 Stycznia 2025

Vonyx STM500BT Instrukcja

11 Stycznia 2025

Rane Sixty-Four Instrukcja

11 Stycznia 2025

Wharfedale SL 1224 USB Instrukcja

11 Stycznia 2025

Glemm MXD 08 Instrukcja

10 Stycznia 2025

Alfatron ALF-VMix41 Instrukcja

8 Stycznia 2025