Instrukcja obsługi Arris SURFboard SBM1000

Arris Niesklasyfikowane SURFboard SBM1000

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Arris SURFboard SBM1000 (82 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 6 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/82
User Guide
ARRIS SURFboard®
SBM1000 SMART Video Adapter Kit*
*SBM1100
SBM1400
© 2013 ARRIS Enterprises, Inc. All rights reserved.
No part of this publication may be reproduced in any form or by any means or used to make any derivative work (such as translation,
transformation, or adaptation) without written permission from ARRIS Enterprises, Inc. (“ARRIS”). ARRIS reserves the right to revise this
publication and to make changes in content from time to time without obligation on the part of ARRIS to provide notification of such revision or
change.
ARRIS, SURFboard, and the ARRIS logo are trademarks or registered trademarks of ARRIS Enterprises, Inc. All other trademarks are the property
of their respective owners.
MOTOROLA and the Stylized M Logo are trademarks or registered trademarks of Motorola Trademark Holdings, LLC, and are used by ARRIS
under license. All other product or service names are the property of their respective owners.
ARRIS provides this guide without warranty of any kind, implied or expressed, including, but not limited to, the implied warranties of
merchantability and fitness for a particular purpose. ARRIS may make improvements or changes in the product(s) described in this manual at
any time.
Safety and Regulatory Information
SBM1000 SMART Video Adapter Kit User Guide iii
590631- -a 001
Safety and Regulatory
Information
IMPOR
IMPOR
IMPOR
IMPORIMPORTANT SA
TANT SA
TANT SA
TANT SATANT SAFETY
FETY
FETY
FETY FETY INSTR
INSTR
INSTR
INSTRINSTRUCTIONS
UCTIONS
UCTIONS
UCTIONSUCTIONS
Read This Before You Begin — When using your equipment, basic safety precautions should always be followed to reduce
the risk of fire, electric shock, and injury to persons, including the following:
Read all of the instructions listed here and/or in the user manual before you operate this device. Give particular attention to
all safety precautions. Retain the instructions for future reference.
This device must be installed and used in strict accordance with manufacturer’s instructions, as described in the user
documentation that is included with the device.
Comply with all warning and caution statements in the instructions. Observe all warning and caution symbols that are affixed
to this device.
To prevent fire or shock hazard, do not expose this device to rain or moisture. The device must not be exposed to dripping or
splashing. Do not place objects filled with liquids, such as vases, on the device.
This device was qualified under test conditions that included the use of the supplied cables between system components. To
ensure regulatory and safety compliance, use only the provided power and interface cables and install them properly.
Different types of cord sets may be used for connections to the main POWER supply circuit. Use only a main line cord that
complies with all applicable device safety requirements of the country of use.
Installation of this device must be in accordance with national wiring codes and conform to local regulations.
Operate this device only from the type of power source indicated on the device’s marking label. If you are not sure of the type
of power supplied to your home, consult your dealer or local power company.
Do not overload outlets or extension cords, as this can result in a risk of fire or electric shock. Overloaded AC outlets,
extension cords, frayed power cords, damaged or cracked wire insulation, and broken plugs are dangerous. They may result in
a shock or fire hazard.
Route power supply cords so that they are not likely to be walked on or pinched by items placed upon or against them. Pay
particular attention to cords where they are attached to plugs and convenience receptacles, and examine the point where they
exit from the device.
Place this device in a location that is close enough to an electrical outlet to accommodate the length of the power cord.
Place the device to allow for easy access when disconnecting the power cord of the device from the AC wall outlet.
Do not connect the plug into an extension cord, receptacle, or other outlet unless the plug can be fully inserted with no part of
the blades exposed.
Place this device on a stable surface.
Avoid damaging the device - -with static by touching the coaxial cable when it is attached to the earth grounded coaxial cable
TV wall outlet.
Always first touch the coaxial cable connector on the device when disconnecting or reconnecting the Ethernet cable from the
device or user’s PC.
It is recommended that the customer install an AC surge protector in the AC outlet to which this device is connected. This is to
avoid damaging the device by local lightning strikes and other electrical surges.
Postpone installation until there is no risk of thunderstorm or lightning activity in the area.
Do not use this product near water: for example, near a bathtub, washbowl, kitchen sink or laundry tub, in a wet basement, or
near a swimming pool.
i


Specyfikacje produktu

Marka: Arris
Kategoria: Niesklasyfikowane
Model: SURFboard SBM1000

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Arris SURFboard SBM1000, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Niesklasyfikowane Arris

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane

Stihl

Stihl HT 70 Instrukcja

15 Października 2024
Ernesto

Ernesto H14270 Instrukcja

15 Października 2024
Uniden

Uniden BT MIC KIT Instrukcja

15 Października 2024
Vaude

Vaude Omnis Bike 26 Instrukcja

15 Października 2024
ART

ART ProChannel II Instrukcja

15 Października 2024
Aukey

Aukey DR02J Instrukcja

15 Października 2024
Master Lock

Master Lock 653EURD Instrukcja

15 Października 2024
Roland

Roland FR-18 Diatonic Instrukcja

15 Października 2024