Instrukcja obsługi ArmyTek Wizard C2 WUV

ArmyTek Lamp Wizard C2 WUV

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla ArmyTek Wizard C2 WUV (27 stron) w kategorii Lamp. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/27
WIZARD C2 WUV
MULTI FLASHLIGHT
2 ENG USER MANUAL
5 GER BENUTZERANLEITUNG
9 FRA MANUEL D’UTILISATEUR
13 RUS РУКОВОДСТВО ПОЛЬЗОВАТЕЛЯ
17 FIN YTTÖOHJE
20 SWE ANVÄNDARMANUAL
23 NOR BRUKSANVISNING
26 POL INSTRUKCJA OBSŁUGI REV_00-0000
2 ENG USER MANUAL WIZARD C2 WUV REV_00-0000
ENG USER MANUAL
Thank you for choosing the products of Armytek.
Please read this manual carefully before using the flashlight.
Headlamp: simple one-hand operation, reliable headmount. Solid body
without long wires, weak rubber connectors and unnecessary boxes.
The flashlight is easily installed, removed and 18 rotatable in the
mount. Quick-release silicone ring provides additional fixation
Every Day Carry light: compact design, convenient side button, spe-
cial matt anti-abrasive finish without rough knurling, strong built-in tail
magnet and robust removable steel clip
Bicycle light: body made from durable and lightweight aircraft-grade
aluminium, improved shock resistance, spring in the tailcap for better
battery and driver protection. Constant light without flickering, optional
quick-release mount
4 LEDs: powerful beam of UV light up to 1.6 W and white light up
to 1100 lm thanks to 2 LEDs for each light
Ultraviolet light is for revealing house stains, detecting leaks, spotting
fluorescent marks, finding minerals, performing forensic investiga-
tions, verification of currency and passports authenticity
5 brightness modes for each type of light, easy operation with one
button, double click for switching between white and UV light
Convenient wide beam of fully upgraded optical system, TIR-lense
Specifications
is protected from scratches by tempered glass with anti-reflective
coating
Innovative technology allows using any standard 18650 Li-Ion bat-
teries and provides full protection against short circuit even in case of
contact between magnetic connector and metal objects
Active real-time temperature control to prevent overheating above
+58 °C and warning indication of low battery level
Total protection from water, dirt and dust in accordance with IP68
standard — flashlight continues to work even at 10 meters depth.
Withstands fallings from up to 10 meters
Robust and water resistant magnetic connector
Set description
Flashlight, 18650 Li-Ion 3200 mAh battery, magnetic USB charger, clip,
headmount, 2 spare O-rings, user manual.
The producer reserves the right to change the package at his own
discretion without modifying this manual. Specifications are sub-
ject to change without notice.
Model Wizard С2 WUV (White)
LED/Optics 2 x Cree XD16 (white) + 2 x Prolight PQ2N (ultraviolet)/TIR
Brightness stabilization type FULL (constant light)
White light Ultraviolet light
Light output 1100 lm 1595 mW
Peak beam intensity 2400 cd
Hotspot : Spill 70°:120°
Beam distance 98 m
Wavelength 400 nm
Modes, light output and
runtimes (measured with
18650 Li-Ion 3200 mAh
battery until the light output
drops to 10% of the initial
value)
Turbo 1100 lm/2 h 30 min (520 lm after 90 sec) 1595 mW/3 h
Main2 410 lm/4 h 491 mW/7 h 30 min
Main1 130 lm/13 h 120 mW/32 h
Firefly 0.6 lm/65 d 1 mW/9 d
Strobe 410 lm/1 Hz/17 h 1595 mW/1 Hz/15 h
Power source 1x18650 Li-Ion
Length/Body diameter/Head diameter 112 mm/20.4 mm/33 mm
Weight without/with battery 65 g /115 g
Dust, water and impact resistance IP68. Submersion at 10 m up to 2 h. Fallings from 10 m
XAll the above specifications are test results based on ANSI/NEMA FL1-2009 Standard. The tests are performed using the battery included in the set.
The data may vary due to environment, heat dissipation and other factors.
3WIZARD C2 WUV USER MANUAL ENGREV_00-0000
Initial Service
TO SET/REPLACE BATTERY
1. Unscrew the tailcap.
2. Place the battery with the positive contact (+) facing the head of the
flashlight.
3. Adjust the tailcap and tighten it as far as it can go.
The flashlight is ready for operation.
HOW TO CONNECT THE MAGNETIC CHARGER
Unscrew the tailcap to 1/4 of a circle and adjust the magnetic charger
to the tailcap.
CHARGER COLOR INDICATION
Charger not plugged in:
Green — device is in waiting mode.
Charger plugged in:
Green blinking — evaluation of battery voltage.
Red blinking — unscrew the tailcap to 1/4 for charging.
Orange blinking — USB power source voltage is too low for correct
continuation of charging or bad contact between charger and battery.
Clean the tailcap and the threads of the flashlight parts, use a dier-
ent power source.
Red — charging with rated charging current is going on.
Orange — USB power source voltage is too low, charging current may
be reduced.
Green — charging is finished.
Operation
Before use: Tighten the tailcap as far as it can go.
In OFF state:
1 click: To turn on the last used mode.
Press and hold: To turn on Firefly mode of the last used light. Keeping
button pressed will start cycling through modes of the chosen light.
Release to select.
In ON state:
1 click: To turn o the flashlight.
Press and hold: To start cycling through modes of the chosen light.
Release to select.
2 clicks: To change between white and ultraviolet light in any mode.
Add/Remove Strobe modes. Unscrew the tailcap to 1/4 while the
flashlight is o, press the button, tighten the tailcap while keeping the
button pressed and then unscrew it again.
Automemorizing. After switching o the last used mode is memorized
for quick access at next switching on.
Active temperature control. When the temperature of the flashlight
becomes close to +58 °С, brightness decreases to safe value, allowing
the flashlight to avoid overheating for a long period of time. In condi-
tions of good air-cooling the flashlight delivers light without stepping
down.
Low battery level. When the brightness is approximately <25% from
the nominal value, the LED will flash 2 times. If you are not sure wheth-
er or not it flashed, switch the flashlight o and on: in case the battery
is low, the flashes will repeat after 30 sec from switching on. At critical
level light output decreases to Firefly mode.
Lock-out function. Unscrew the tailcap to 1/4 for protection from
accidental switching on.
Warnings
For eective operation of the flashlight we recommend branded 18650
Li-Ion batteries without PCB (unprotected) no more than 70 mm long.
The flashlight can get hot in Turbo and Strobe modes quickly and
discharge the battery with high current. Don’t leave it without your
attention as very bright light might heat objects and cause fire.

Specyfikacje produktu

Marka: ArmyTek
Kategoria: Lamp
Model: Wizard C2 WUV

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z ArmyTek Wizard C2 WUV, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Lamp ArmyTek

ArmyTek

ArmyTek Tiara C1 Instrukcja

3 Października 2024
ArmyTek

ArmyTek Zippy WR Instrukcja

3 Października 2024
ArmyTek

ArmyTek Viking Pro Instrukcja

3 Października 2024
ArmyTek

ArmyTek Wizard C2 WUV Instrukcja

3 Października 2024
ArmyTek

ArmyTek Predator Pro Instrukcja

3 Października 2024
ArmyTek

ArmyTek Wizard C2 WR Instrukcja

3 Października 2024
ArmyTek

ArmyTek Tiara C1 Pro Instrukcja

3 Października 2024
ArmyTek

ArmyTek Wizard Magnet Instrukcja

3 Października 2024
ArmyTek

ArmyTek Wizard C2 Instrukcja

3 Października 2024

Instrukcje Lamp

Najnowsze instrukcje dla Lamp

Fenix

Fenix E-Spark Instrukcja

3 Października 2024
Fenix

Fenix TK20R V2.0 Instrukcja

3 Października 2024
Fenix

Fenix PD36R Pro Instrukcja

3 Października 2024
Fixpoint

Fixpoint 45268 Instrukcja

3 Października 2024
Chauvet

Chauvet 4Bar LTBT ILS Instrukcja

3 Października 2024
Chauvet

Chauvet 4BAR ILS Instrukcja

3 Października 2024