Instrukcja obsługi ArmyTek Elf Micro-USB

ArmyTek Lampa Elf Micro-USB

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla ArmyTek Elf Micro-USB (2 stron) w kategorii Lampa. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/2
Model
Elf C1 Micro USB-
Elf C Micro USB2 -
LED / Optics
Cree XP-L / TIR
Brightness stabilization type
DIGITAL (CPU brightness control)
Light output, LED / OTF lumens*
1050 / 900
Peak beam intensity, candelas
2830
Hotspot / spill
70 ° / 1 0°2
Beam distance*
106 meters
Modes, light output (OTF lumens*)
and runtimes (measured with
18350 Li-Ion 0 mAh / 90
18650 Li-Ion 3 00mAh until the 4
light output drops to 10% of the
initial value)
Turbo
900 lm / 40min
900 lm / 2h
Main3
340 lm / 1h
340 lm / 4h
Main2
150 lm / 2.5h
150 lm / 10.5h
Main1
30 lm / 15h
30 lm / 55h
Firefly2
2.3 lm / 7d
2.3 lm / 25d
Firefly1
0.4 lm / 54d
0.4 lm / 200d
Power source
1x18350 Li-Ion
1x18650 Li-Ion
Size and weight (without batteries)
Length mm, body diameter 24 5mm, head 83 .
diameter 29mm, weight g62
Length mm, body diameter 24 5mm, head 112 .
diameter 29mm, weight g65
Specifications
Armytek Optoelectronics Inc. is a Canadian manufacturer that produces powerful and reliable flashlights designed especially for your
needs. The components made in the USA and Japan. .10 years no-hassle warranty
§Amazingly powerful multi-flashlight with up to 1 LED lumens brightness powered by only one battery.050
§Rechargeable flashlight with Micro-USB c .able
§TIR optics with light angles 70°:120° for wide light without a “tunnel vision” effect.
§Reliable headband made of soft elastic material for comfortable fixation of the lamp on the head.
§Easy operation and 6 convenient brightness modes.
§Due to a side switch button you can operate the multi-flashlight easily with one hand without shifting it aside.
§Magnet in the tailcap, removable clip and possibility of tail-stand for multipurpose use.
§Compact and light-weight but at the same time durable and multi-functional flashlight.
§Record runtimes up to 200 days of operation on one battery.
§Removable clip for fixation on a belt and flat tailcap for vertical standing.
§Total protection from water, dirt and dust penetration – flashlight continues to work even at the depth of 10 meters. Solid body
without long wires, weak rubber connectors and unnecessary boxes.
§Multicolor State Indication and ultra low current drain in OFF-state more than 25 years.
* Light output for flashlights with Warm light are about 7% less, beam distances are about 3% less.
Remember that old or low-quality disposal batteries can be damaged under heavy load and explode.
Elf Micro-USB
USER MANUAL
Thank you for choosing the products of Armytek Optoelectronics Inc., Canada.
Please read this manual carefully before using the flashlight.
Warnings
Specifications are subject to change without notice.
Armytek Optoelectronics Inc.
Web: www.armytek.com Email: service@armytek.com
Address: 13-85 West Wilmot St, Richmond Hill, Ontario, L4B 1K7, Canada
Care and Storage
1. Always follow the instructions from this manual and recommendations on battery usage.
2. Apply only the recommended power sources.
3. Do not reverse battery polarity.
4. Do not use different power sources together, i.e. old ones with new ones, charged with
discharged. Do not use different types of batteries combined as the element with less
capacity can be damaged.
5. Do not modify or recast the flashlight and its components as it will deprive you of the
warranty.
6. Do not allow water or any other liquid to leak into the flashlight.
7. Do not aim a switched-on flashlight at people's or animals' eyes – it can cause temporary
blindness.
8. Do not allow children to use the flashlight without your assistance.
The producer will not be liable for any harm done to the user if it was caused by
improper use of the product.
It is recommended to clean the threads and O-ring off dirt and old greases once or twice per year. Remember that protection reliable
from water and dust cannot be provided by worn out sealing. The fouling as well as lack of lubricant cause fast wear-out of threads and
sealing rings.
To clean the threads do the following:
1. Unscrew the tailcap and remove the sealing ring carefully with a toothpick (do not use sharp metal things as they can damage the ring).
2. Wipe the sealing ring thoroughly with a soft cloth (or tissue). Do not use solvents. If the sealing ring is worn out or damaged
replace it by a new one.
3. Clean the metal threads with a brush using ethanol. Be careful not to allow the applied liquid to get inside the flashlight or tailcap as
it can cause fails in functionality of the flashlight.
After cleaning lubricate the thread and the sealing ring with polyalphaolefin-based silica grease, e.g. Nyogel 760G.The application of
automotive and other improper grease can cause swelling and damage of the sealing rings.
In case of active operation and exploitation in dusty environments, it is recommended to perform cleaning and lubricating of the parts
as often as required.
THE MOST TECHNICALLY ADVANCED
Service and Warranty
Armytek provides free warranty repair for 10 years (excluding batteries, chargers, switches and connectors which have 2 years
warranty) from the date of buy with the document confirming the purchase.
Guarantee does not extend to damage during:
1. Improper usage.
2. Attempts to modify or repair the flashlight by nonqualified specialists.
3. Longtime application in chlorinated or polluted water, or other liquids (other than water).
4. High temperatures and chemicals' exposure (including the exposure of liquid from defected batteries).
5. Usage of low-quality batteries.
Operation
Initial Service
In OFF state:
Click: To turn on the last used mode.
Press and hold: To go through 2 Firefly modes (release to
select). Keeping button pressed will start cycling through the
Main modes.
In ON state:
Click: To turn off the flashlight.
Press and hold: To start cycling through the Main modes.
Double click: To turn on the Turbo mode. The second
double click brings back the last used mode.
For comfortable operation you have a convenient
momentary access to all the following modes:
Main. Short click from OFF-state activates the Main mode (if it
was the last mode used previously).
Firefly. Press and hold the button in OFF-state to turn on the
desired Firefly mode and then release immediately. Keeping
the button pressed will start cycling through the Main modes.
Turbo. The mode is activated by double click, when the
flashlight is on. To return to the last mode make double-click
again.
Cycling through the Main modes. In ON-state press and hold
the button (in any mode): the 3 Main modes will start
switching cyclically. Release the button to select the desired
mode. In Turbo mode it starts cycling through the Main
modes.
Automemorizing. After switching off the last used Mode is
memorized for quick 1-click access at next switching on.
Lock-out function. Unscrew the tailcap to 1/4 for the
protection from accidental switching on.
Warning indication shows the bat tery level and the
temperature inside the flashlight.
Low battery level. When it is < 25%, the color LED will show
the warning level – flashing in orange color once in 2 second.
With a further voltage reducing brightness will start to
decrease in steps for safety of the battery and user. If
brightness will be <25% from nominal value, the main LED
will flash 2 times. Critical battery level <10% is red indicated
once a second.
High temperature. When it increases to the warning level the
color LED flashes by orange 3 times once in 2 seconds. At
critical level it flashes by red 3 times once in 1 second,
brightness starts to reduce. After cooling down the brightness
increases to usual level.
To set/replace batteries:
1. Unscrew the tailcap.
2. Place the batteries with the positive contact (+) facing
the head of the flashlight.
3. Adjust the tailcap and tighten it as far as it can go.
The flashlight is ready for operation.
1. 2. 3.
Pass the end of the band through the clasp.B
( for Elf C2 Micro-USB)
Put in the band in the first clasp.A
Put in the bands through the
slots in the plastic holder
and fix the flashlight. Adjust
elastic bands to the size of
your head.
3.
Pass the band through the eye of the band .A B
( for Elf C2 Micro-USB)
5.
A
A
1.
2.
Pass the end of the band through the second clasp and fix it.A
4.
To use the headmount with the flashlight:
B
A
B
Click x2 Turbo
ON Turbo в
Turbo вLast mode
We DO NOT RECOMMEND to leave power sources inside the flashlight for a long storage period, as batteries (especially, non-rechargeable) can
leak for various reasons and damage the inner parts of the flashlight. If you want to keep your flashlight in a stand-by state with batteries in then
use new and high- andquality batteries store the flashlight in acceptable for batteries operational temperature and revise the batteries' state at
least once a month. If you have noticed any signs of batteries' defects then withdraw them from the flashlight and utilize. It is also recommended
to replace discharged batteries with new ones before the storage as the chance of leakage is higher with discharged batteries.
Press & Hold Firefly
OFF Firefly1 Firefly2в в
Click x1 Main
OFF Main (if last used)в
Press & Hold Cycling through Modes
Flashlight charging
OFF
Flashlight charging. Turn off the flashlight and connect the cable. The color of the button displays
the charging stage: red – the flashlight is charging, green – the flashlight is charged. If there is no
indication, the battery is removed or installed in the wrong polarity. Approximate time for charging
a fully discharged battery is 6-8 hours. We recommend using adapters with 1A and higher.
Lamp mode. The flashlight can work in lamp mode without battery, in Firefly1, Firefly2, Main1 and
Main2 modes. To do this, connect the cable and remove the battery. In this mode, the selection of
brightness modes is carried out by holding the button. Turn on and off – click. There is no color
indication in the lamp mode.
Warning Critical
2 sec
Low Battery Indication
< %25
1 sec
< %10
Warning Critical
High Temperature Indication
WARM HOT
2 sec 1 sec
Main1 Main2в
ез
Main3
Set description
Items included in the package:
1 - Flashlight
2 - Clip
3 - User manual
4 - 2 spare O-rings
5 - 18650 (Li-Ion battery Elf C2 Micro-USB)
18350 Li-Ion battery (Elf C1 Micro-USB)
6 - Magnet
7 - Lanyard
8 - Headband (2 straps
for Elf C2 Micro-USB)
9 - Plastic holder
Elf Micro-USB
2 3
8
x2
4
9
5
17
ьYour flashlight can inconsiderably differ from the pictures in the manual.
ьThe producer reserves the right to change the package at his own discretion without modifying this manual.
6


Specyfikacje produktu

Marka: ArmyTek
Kategoria: Lampa
Model: Elf Micro-USB

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z ArmyTek Elf Micro-USB, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Lampa ArmyTek

ArmyTek

ArmyTek Tiara C1 Instrukcja

3 Października 2024
ArmyTek

ArmyTek Zippy WR Instrukcja

3 Października 2024
ArmyTek

ArmyTek Viking Pro Instrukcja

3 Października 2024
ArmyTek

ArmyTek Wizard C2 WUV Instrukcja

3 Października 2024
ArmyTek

ArmyTek Predator Pro Instrukcja

3 Października 2024
ArmyTek

ArmyTek Wizard C2 WR Instrukcja

3 Października 2024
ArmyTek

ArmyTek Tiara C1 Pro Instrukcja

3 Października 2024
ArmyTek

ArmyTek Wizard Magnet Instrukcja

3 Października 2024
ArmyTek

ArmyTek Wizard C2 Instrukcja

3 Października 2024

Instrukcje Lampa

Najnowsze instrukcje dla Lampa