Instrukcja obsługi Argoclima ECOLIGHT 24

Argoclima klimatyzacja ECOLIGHT 24

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Argoclima ECOLIGHT 24 (41 stron) w kategorii klimatyzacja. Ta instrukcja była pomocna dla 15 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/41
Please read this manual carefully before installing and using the air conditioner, and
retain for future reference.
V
09/19
USER MANUAL and INSTALLATION GUIDE
INDOOR UNIT OUTDOOR UNIT
ECOLIGHT 9000 UI (WIFI) ECOLIGHT 9000 UE
ECOLIGHT 12000 UI (WIFI) ECOLIGHT 12000 UE
ECOLIGHT 18000 UI (WIFI) ECOLIGHT 18000 UE
ECOLIGHT 24000 UI (WIFI) ECOLIGHT 24000 UE
ECOLIGHT
SINGLE SPLIT AIR
CONDITIONERS – R32
V 09/19 42
Contents
Information for use
The Refrigerant 43
Precautions for use 44
Description of components 46
Guide to the remote control and display
Remote control buttons 47
Getting to know the display icons 48
Getting to know the remote control buttons 48
Getting to know the button combination functions 51
Operating guide 52
Replacing the remote control batteries 52
WiFi Guide 53
Emergency operation 63
Maintenance
Care and cleaning 63
Troubleshooting
Possible faults and solutions 64
Analysing faults and solutions 66
Installation instructions
Installation warnings 68
Choosing a location for installation 68
Electrical connection requirements 69
Installation
Indoor unit installation 69
Outdoor unit installation 73
Post-installation checks 76
Testing and operation
Functional testing 77
Appendices
Piping configuration 77
Safety operation of flammable refrigerant 78
Procedure for extending the piping 79
INFORMATION FOR CORRECT DISPOSAL OF THE PRODUCT IN ACCORDANCE WITH THE EUROPEAN DIRECTIVE
2012/19/EU
At the end of its working life this equipment must not be disposed of as an household waste. It must be taken to special local
community waste collection centres or to a dealer providing this service. Disposing of electrical and electronic equipment
separately avoids possible negative effects on the environment and human health deriving from an inappropriate disposal and
enables its components to be recovered and recycled to obtain significant savings in energy and resources. In order to
underline the dut
y
to dis
p
ose of this e
q
ui
p
ment se
p
aratel
y,
the
p
roduct is marked with a crossed-out dustbin.
V 09/19 43
The Refrigerant
To realize the function of the air conditioner unit, a special refrigerant circulates in the system.
The refrigerant is the fluoride R32 = GWP (Global warming potential). This refrigerant is
flammable and inodorous. It can lead to explosions under certain conditions, however the
flammability of this refrigerant is very low and it can be ignited only by fire.
Compared to other common refrigerants, R32 is a non-polluting refrigerant with no harm to
the ozonosphere and a lower effect upon the greenhouse effect. R32 has very good
thermodynamic features which lead to a really high energy efficiency. The units therefore
need less filling.
Warning:
Do not try to accelerate the defrosting process or to clean the appliance in different ways other than
those recommended by the manufacturer. Should repair be necessary, contact your nearest
authorized Argoclima Service Centre. Any repairs carried out by unqualified personnel may be
dangerous. The appliance has to be stored in a room that doesn’t have any continuously operating
ignition sources. (for example: open flames, an operating gas appliance or an operating electric
heater.) Do not pierce or burn.
Appliance has to be installed, operated and stored in a room with a floor area larger than X m2.
(Please refer to table "a" in section of " Safety Operation of Inflammable Refrigerant" for Space X.)
For repairs, strictly follow manufacturer’s instructions only for appliances filled with R32 flammable
gas. Be aware that refrigerants do not have any odour.
Appliance filled with flammable gas R32.
Before using the appliance, read the owner’s manual.
Before installing the appliance, read the installation manual.
Before repairing the appliance, read the service manual.
V 09/19 44
INFORMATION FOR USE
Precautions for use
WARNING
This product is not a toy. Children of less than 3 years should be
kept away unless continuously supervised.
This device is not intended for persons (including children aged
from 8 years and above) with reduced physical, sensory or mental
capabilities, or without the necessary experience and knowledge,
unless they have received the necessary supervision or instruction
concerning use of the appliance by a person responsible for their
safety.
Children aged from 3 and less than 8 years shall only switch on/off
the appliance provided that it has been placed or installed in its
intended normal operating position and they have been given
instruction concerning use of the appliance in a safe way and
understand the hazards involved. Children aged from 3 years and
less than 8 years shall not plug in, regulate and clean the
appliance or perform user maintenance.
To prevent the risk of fire, do not connect the air conditioner to a
multifunction socket.
Always disconnect the power before servicing or cleaning the unit.
To prevent the risk of electric shock or malfunction, do not spray
water on the indoor unit.
Do not spill water on the remote control.
To prevent the risk of electrical shock or damage, do not attempt
to repair the air conditioner yourself. After performing the checks
in the troubleshooting section, contact an authorised service
centre.
Do not obstruct the inlet or outlet. Otherwise, a fault may occur.
Contact a qualified technician if it is necessary to move the air
conditioner to another location.
Do not climb on or place heavy objects on the top panel of the
outdoor unit. Otherwise, there is a risk of damage or personal
injury.
Do not put fingers or other objects in the air inlet/outlet grilles.
Otherwise, there is a risk of damage or personal injury.
The air conditioner must be properly earthed. Improper earthing
can cause electrical shock.
V 09/19 45
Always install a circuit breaker. Otherwise, a fault may occur.
The unit must be installed and serviced by a qualified technician.
Otherwise, there is a risk of damage or personal injury.
WARNING
In case of smoke or burning
smell, turn off the power supply
and contact the service center.
If the problem persists, the unit
could be damaged and cause
electrical shock or fire.
It is necessary that power supply
adopts the special circuit with
protection through an air switch
and ensure it has sufficient
capacity . The unit switches on
or off automatically according to
user needs: do not turn on or
turn off the device frequently
otherwise it could suffer harmful
effects.
Do not cut or damage the power
cords and control cables. If the
power cable and the cable of the
control signal are damaged, they
must be replaced by a
professional technician.
The power supply must be
equipped with a special circuit to
prevent fire.
Otherwise, it may result in fire or
electric shock.
Disconnect the power supply if
the air conditioner is not used for
a long time
Otherwise, the accumulation of
dust can cause overheating.
Do not damage the power cord
or use an unauthorized cable.
Otherwise, it may cause
overheating or fire.
When cleaning the unit, stop
operation and turn off the power.
Otherwise, may occur electric
shock or damage.
The voltage rating of this product
is 220 - 240V, 50Hz. The
compressor vibrates strongly if
the voltage is too low, causing
damage to the cooling system.
The electrical components are
easily damaged if the voltage is
too high.
Do not attempt to repair the air
conditioner yourself.
An improper repair can cause
fire or electric shock. For this
reason, it is advisable to contact
a service center for repairs.
Check if the installed media is
sufficiently stable.
If damaged, it can cause the
equipment to fall and cause
injury.
Do not climb on the outdoor unit
or place anything on it.
The falling of the outdoor unit
can be dangerous
Earthing: The unit must be
properly grounded. The cable
grounding must be connected
with the appropriate device in
the building.
Operating limits
Operating range:
Cooling mode: from -15°C to +43°C (outdoor temperature)
Heating mode: from -15°C to +24°C (outdoor temperature)
Interrompere
l'alimentazione
elettrica.
V 09/19 46
Description of components
Indoor unit
The display may vary from the graphic above. Please refer to the purchased product for the actual
display content and positions)
ingresso aria air inlet
pannellino panel
filtro filter
Tasto ausiliario auxiliary button
Deflettore orizzontale horizontal flap
uscitadell’aria air outlet
Spia alimentazione power indicator
Finestrella ricevitore receiver window
Spia temperatura temperature indicator
telecomando remote control
V 09/19 48
Getting to know the display icons
Getting to know the remote control buttons
N.B.:
● This is a general use remote controller, it can be used for the air conditioners with multifunction.
For some functions, which the model doesn't have, if you press the corresponding button on the
remote controller the unit will keep the original running status.
●Once connected to the power source, the air conditioner will make a sound. At this point the
operation indicator " " is ON (red indicator). You can now operate the air conditioner by using the
remote controller.
● Pressing the ON/OFF button on the remote controller, the signal icon " " on the display of remote
controller will blink once and the air conditioner will make a sound, this means that the signal has
been sent to the air conditioner. In the ignition state, the display shows the corresponding function
icons.
● Pressing once again the ON/OFF button to turn off the unit, the set temperature and the clock icon
will be displayed on the display of remote controller (If timer on, timer off and light functions are set,
the corresponding icons will be displayed on the display of remote controller at the same time);
1. On/Off button
Press this button to turn on or off the unit. The sleep function will deactivate when the unit is turned
off.
2. Mode
button
Each time you press this button, a mode is selected in a sequence that goes from: AUTO, COOL,
DRY, FAN, and HEAT *, as the following:
When you select automatic mode, the air conditioner will operate automatically according to the
factory settings. The set temperature cannot be adjusted and will not be displayed. Pressing the
"FAN" button will allow you to adjust the fan speed. Pressing the "SWING" button will allow you
to adjust the angle of airflow.
When you select cool mode, the air conditioner will run in cool mode. The
indicator will
illuminate on the display. Press " " to adjust the set temperature. Press the "FAN" button ▲" or "▼
to adjust the fan speed. Pressing the "SWING" button will allow you to adjust the angle of airflow.
Send signal
Turbo mode
8℃ heating function
Set temperature
Set time
TIMER ON /TIMER OFF
Child lock
Up & down swing
Set fan speed
Light function
Temp. display type
:Set temp.
:Outdoor ambient temp.
:Indoor ambient temp.
Sleep mode
Heat mode
Fan mode
Dry mode
Cool mode
Auto mode
Operation mode
I feel function
X-fan mode
health function
ventilation operation
NOTICE: “ ” This is a general remote controller. Some models have this function while some
do not. Please refer to the actual models.
V 09/19 50
6. SLEEP button
In cool, heat or dry mode, press this button to start the SLEEP function. The icon will appear
on the remote control display. Press the button again to exit the SLEEP function. The icon
will disappear from the display.
The temperature will increase or decrease by 2 degrees over two hours according to the function
selected (cool/heat).
7. TEMP button
Pressing this button will allow you to display the set temperature, the indoor ambient temperature,
or the outdoor ambient temperature on the indoor unit's display. You can cycle through the
settings on the remote control display as shown below:
Nessuna visualizzazione no display
• When you select or “no display” with the remote control, the set temperature will appear
on the indoor unit's display.
• When you select with the remote control, the indoor ambient temperature will appear on
the indoor unit's display.
• When you select with the remote control, the outdoor ambient temperature will appear
on the indoor unit's display.
N.B.:
•
It is not possible to display the outdoor ambient temperature on all models. The indoor unit
will receive the signal but will display the set temperature.
•
The set temperature will appear on the unit's display on start-up, if enabled to do so.
• When you select to display the indoor or outdoor ambient temperature, the indoor unit will
display the corresponding temperature for three to five seconds, after which it will
automatically revert to displaying the set temperature.
8. TURBO button
In cool/heat mode, press this button to switch to rapid cool/heat mode. The icon will appear
on the remote-control display. Press this button again to exit the TURBO function. The icon
will disappear from the display.
9. I FEEL button
Press this button to start the I FEEL function. The icon will appear on the remote control
display. When you select this function, the remote control will send the detected ambient
temperature to the indoor unit, which will then adjust its operation automatically based on the
difference between the detected temperature and the set temperature.
Press the button again to exit the I FEEL function. The icon will disappear from the display.
The remote control should be positioned near the user when this function is selected. The
remote control should not be placed anywhere high or low temperatures may occur to
avoid inaccurate ambient temperature detection.
10. TIMER ON/OFF button
On a working unit, press this button to set the unit's power off time. When the unit is off, press
this button to set the unit's power-up time. By pressing this button, the HOUR ON or HOUR OFF
indicator starts blinking: if you press "▲" or "▼" buttons you can set the time (from 0.5 to 24) to
switch the unit off or on. Hold down the button "▲ ▼" or " " for 2 seconds to quickly change the
time until the desired time is reached. Press the TIMER button to confirm the TIMER settings
and the HOUR ON or HOUR OFF indication will stop blinking.
If the “HOUR” message flashes but does not follow any setting, it will stop flashing after 5
seconds. If the TIMER ON or OFF function is activated, press the TIMER button to cancel the
setting.
nessuna
visualizzazione
V 09/19 51
11. Wi-Fi button
Press this button to start the Wi-Fi function. When the Wi-Fi function is active, the "Wi-Fi" icon
will appear on the remote control display. When the remote control is off, press and hold the
"Mode" button and the "Wi-Fi" button simultaneously for 1 sec to return to the factory settings.
12. LIGHT button
Press this button to turn off the indoor unit's display light. The icon will disappear from the
remote control display.
Press this button again to turn on the display light. The icon will appear on the display.
Getting to know the button combination functions
Energy saving function
In cool mode, press the TEMP and CLOCK buttons simultaneously to start or stop the energy
saving function. When you start the energy saving function, "SE" will appear on the remote
control display and the air conditioner will automatically adjust the set temperature according to
the factory settings to achieve the best energy-saving effect. Press TEMP and CLOCK again
simultaneously to exit the energy saving function.
N.B.:
• When the energy saving function is enabled, the fan will operate at the default automatic speed
and cannot be adjusted.
• When the energy saving function is enabled, the set temperature cannot be adjusted. The
remote control will not send a signal to the unit when the TURBO button is pressed.
The SLEEP and energy saving functions cannot operate simultaneously. If the energy saving
function was set in cool mode, press the SLEEP button to cancel it. If the SLEEP function was
set in cool mode, start the energy saving function to cancel it.
8°C heating function
In cool mode, press the TEMP and CLOCK buttons simultaneously to start or stop the 8°C
heating function. When this function is enabled, and 8°C will appear on the remote control
display and the air conditioner will continue to operate at 8°C. Press TEMP and CLOCK again
simultaneously to exit the 8°C heating function.
N.B.:
• When the 8°C heating function is enabled, the fan will operate at the default automatic speed
and cannot be adjusted. The remote control will not send a signal to the unit when the TURBO
button is pressed.
The SLEEP and 8°C heating functions cannot operate simultaneously. If the 8°C heating function
was set in cool mode, pressing the SLEEP button will cancel it. If the SLEEP function was set
in cool mode, starting the 8°C heating function will cancel it.
• When the temperature display is in °F, the remote control will show that the unit is operating at
46°F.
Remote control button lock function
Press "▲" and "▼" simultaneously to enable or disable the remote control button lock function.
When this function is enabled, will appear on the remote control display. If you attempt to
operate the remote control, the icon will flash three times and no signal will be sent to the
unit.
Switching temperature display
In OFF mode, press the "▼" and "MODE" buttons simultaneously to switch from a temperature
display in °C to °F.
V 09/19 52
Operating guide
General operations
1. When you connect the power, press the "ON/OFF" button on the remote control to turn the
air conditioner on.
2. Press the MODE button to select the desired operating mode: AUTO, COOL, DRY, FAN or
HEAT.
3. Press "▲ ▼" or " " to adjust the desired temperature. (The temperature cannot be adjusted in
automatic mode.)
4. Press the "FAN" button to set the desired fan speed: automatic, low, medium or high.
5. Press the "SWING" button to adjust the fan's angle of airflow.
Optional Operations
1. Press the SLEEP button to set the function sleep
2. Press the timer ON/ timer OFF button to set the timer ON or timer OFF
3. Press the LIGHT button to check the switching on or off of the different parts of the display
(this function may not be possible for some units)
4. Press the TURBO button to activate or deactivate the function TURBO.
Replacing the remote-control batteries
1. Remove the battery compartment cover, marked
with (see image to right), by sliding it in the
direction of the arrow.
2. Use only two AAA – LR03 1.5V batteries. Make
sure the + and – ends are facing the correct
direction.
3. Slide the battery compartment cover back into
place.
batterie batteries
reinserimento close
rimozione open
Coperchio vano batterie battery compartment cover
N.B.:
When the unit is operating, point the remote control's signal transmitter at the indoor unit's
receiver.
The distance between the transmitter and the receiver must not exceed 8 metres and should
remain free of obstacles.
If the room contains a fluorescent light or cordless telephone, signal interference can occur.
When the remote control is not used for a month or more, remove the batteries.
Use batteries of the same type when replacing the batteries, as necessary.
If the icons on the remote control display are blurred or not visible, replace the batteries.
INFORMATION FOR THE CORRECT DISPOSAL OF BATTERIES IN ACCORDANCE WITH EUROPEAN DIRECTIVE
2006/66/EC and MODIFICATIONS INTRODUCED BY DIRECTIVE 2013/56/EU
Replace batteries when they are depleted. At the end of their life, batteries must be disposed of separately from unsorted
waste. They must be taken to designated recycling centres or returned to a retailer providing this service. Separate disposal
of batteries helps to reduce the potential harmful effects on the environment and human health caused by their improper
disposal and also enables the re ving significant energy and resources. The covery and recycling of component materials, sa
requirement for separate disposal is indicated by the crossed-out wheelie bin label affixed to the appliance. Illegal disposal
of the product by the user is subject to administrative penalties as per current regulations.
V 09/19 53
WIFI GUIDE (ONLY FOR AIR CONDITIONERS WITH WIFI)
How to set and operate the air conditioner with Wifi
1. Make sure that the device (smartphone or Tablet) used is equipped with a standard version of
Android (version 4.4 or higher) and iOS (iOS7.0 or higher) as the operating system. For more details
refer to the App.
2. Units can be connected and controlled only via Wi-Fi network or via Hotspot function.
3. Routers with WEP encryption are not supported.
4. The application interface is universal for all products and many features may not match for all
units. It may vary depending on the operating system used or the update in use. Refer to the current
version.
5. If the access protection on your Router is active in the "MAC Filter" / "MAC address filter" item,
enable the access to the network of the MAC address of the device.
Installation and use instruction
1. Frame the QR Code using a QR Code Reader
or search for the "EWPE SMART" application in the app store
download and install the application.
Install the App by referring to its guide. Once the installation is complete, the icon
appears on the smartphone's home page.
NB:
Before starting any procedure, disconnect the power supply from the product, allow
a few minutes to pass and reconnect it.
V 09/19 55
Select the relevant type:
In case of residential air conditioner: the first box on left
After choosing the category of interest, proceed with the reset of the unit.
Different unit reset systems can be chosen depending on the type of unit / system and
remote control (with or without wifi key).
Follow step by step the operative instructions depending on the selected reset system.
V 09/19 56
After performing the reset following the instructions, click on Next to automatically add the unit
(it’s necessary to enter Wi-Fi password).
WIRE CONTROL OR
PORTABLE AIR
CONDITIONER (CONTROL
PANEL RESET)
Press the button on the touch
panel.
With the unit off, press and
hold the "Wifi" button for 10
seconds. When the unit
beeps, it means the reset has
been successful.
NB:
The configuration must be
done within 2 minutes. If it
does not happen within 2
minutes, repeat the reset
operation.
REMOTE CONTROL WITH WIFI
BUTTON
Direct the remote control towards
the unit.
With the remote control off, press
the "Mode" + "Wifi" buttons
simultaneously for 1 second.
When the unit beeps, it means
that the reset has been
successful.
NB:
The configuration must be done
within 2 minutes. If it does not
happen within 2 minutes, repeat
the reset operation..
REMOTE CONTROL WITHOUT WIFI
BUTTON (MODE and TURBO)
Direct the remote control towards
the unit.
Press the "Mode" + "Turbo"
buttons simultaneously for 10
seconds. After the unit has twice
produced an acoustic signal, this
will mean that the reset has been
successful.
NB:
The configuration must be done
within 2 minutes. If it does not
happen within 2 minutes, repeat
the reset operation
Alternatively, after setting and resetting the air conditioner, click on in the Add appliance manually
upper right corner to select the Wi-Fi network to associate.
V 09/19 57
Select the desired network and continue the configuration.
After performing the electrical reset of the unit and entering the information, perform a search for
the unit (Search appliance) and continue the configuration.
V 09/19 58
Configuration of the main functions
In the Homepage click on the device you wish to control and access the operating interface of it.
1. Select, operating mode, temperature and fan speed.
- Mode
1. Temperature for each mode: just slide your finger on the indicated temperature
2. Ventilation speed for each mode: just slide your finger on the fan symbol (the
adjustment possibilities vary depending on the mode)
3.
V 09/19 59
4. Set advanced functions
Click Function (Func) in the lower left corner of the interface to enter the advanced settings.
X-FAN function Vertical flap swinging Horizontal flap swinging
(if available)
Sleep function Light on indoor unit display Temperature unit conversion
V 09/19 60
Swing setting
Clic Up & down swing to turn the swing function on or off. Click the arrow in the lower right
corner of the icon to go to the next screen and set the swing level.
List of Preselections
Clic Timer. Then clic + and make adjustments.
Other functions
1. Homepage menu
Click on the profile picture in the upper left corner of the homepage and set each
menu function.
V 09/19 61
2. Group Control
Click Group Control to use the present devices (Ex. Change the group name to "hhh" and set up the devices
in the group list). When this group is working you can change the settings of the whole group.
3. Home Management
Click Home Management to create or manage a "family system". You can add new members to the
family system of the registered account.
V 09/19 62
4. Help
Press Help to view the instructions for EWPE SMART APP.
5. Feedback
Clic Feedback to send a feedback on the product.
V 09/19 63
6. How to reset the air conditioner WiFi module:
Turn off the unit with the remote control and disconnect the air conditioner power for at least 10
seconds. Reconnect the power supply. After 1 minute, press the "WiFi" and "Mode" buttons
simultaneously. If the air conditioner beeps, it means that the WiFi module has been reset correctly.
Attention: The configuration is carried out within 2 minutes. If it does not happen within 2 minutes,
repeat the reset operation.
Analysis of common network setting errors:
If the short distance control does not work, perform the checks specified below:
• Make sure the air conditioner power is connected.
• Make sure that the air conditioner's WiFi function is normally active.
• Make sure your phone's WiFi selects the corresponding air conditioner.
• Reset with the remote control and restart the setting from step 3.
It is important to remember what is listed below.
1. The WiFi function of the air conditioner takes about 1 minute to start.
2. The air conditioner is equipped with memory function.
Emergency operation
In the event of loss or failure of the remote control, use the emergency button located under the
indoor unit's front panel to turn the air conditioner on or off.
The unit will operate in automatic mode on start-up.
pannellino panel
Tasto ausiliario auxiliary button
MAINTENANCE
Care and cleaning
N.B.:
Disconnect the power before servicing or cleaning the unit.
Cleaning the casing of the indoor unit
Use a soft, damp cloth to clean the outer surface of the unit.
Do not use water that is too hot, solvents, petrol or other aggressive chemical compounds, talcum
powder or brushes. These may damage the colour or surface of the casing.
To remove stains, use warm water with a little neutral detergent.
Do not pour water onto the air conditioner to clean it. This may damage the internal components
or cause a short circuit.
N.B.: Do not remove the panel when cleaning the unit.
tasto ausiliario
pannellino
V 09/19 64
Cleaning the filters
Open the panel
Lift the front panel of the indoor unit, as shown.
Remove the filters
Remove the filters by lifting one of the
bottom corners and pulling them
downwards, as shown.
Clean the filters
• Use a vacuum cleaner to clean the filters.
• If they are very dirty, use water (below 45°C)
and leave to dry in a cool, dark place.
Refit the filters
Refit the filters and close the front panel.
N.B.:
The filters should be cleaned every three months, or more frequently if the room is very dusty.
WARNING!
When you remove the filters, avoid contact with the heat exchanger (there is a risk of
cuts or abrasion).
Do not use a hairdryer to dry the filters; the heat can cause damage and warping.
Before-use checks
1. Check that the air inlet and outlet are free of obstructions.
2. Check that the circuit breaker, plug and socket are in good working order.
3. Check that the filters are clean.
4. Check that the outdoor unit's support bracket is not damaged or corroded. If it is, contact the
service centre.
5. Check that the piping is not damaged.
After-use checks
1. Disconnect the power supply.
2. Clean the indoor unit's panel and filters.
3. Check that the outdoor unit's support bracket is not damaged or corroded. If it is, contact the
service centre.
N.B.
1. Many packaging materials are recyclable materials. Please dispose of them in the
appropriate recycling unit.
2. If you want to remove the air conditioner, please contact your local dealer or local service
provider for the correct disposal method.
TROUBLESHOOTING
Possible faults and solutions
WARNING
Do not attempt to repair the unit yourself. Improper repair can cause electric shocks or fire.
Disconnect the unit from the power supply before contacting your local Technical Service Centre.
Carry out the following checks before contacting your Technical Service Centre:
V 09/19 65
Fault Check Solution
The indoor unit
does not receive
the signal from
remote control or
the remote
control does not
seem to be
working
Is there noticeable interference (e.g. static
electricity, stable voltage)?
Pull out the plug. After about 3 minutes
reinsert the plug and restart the unit.
Is the remote control within the signal
reception range?
Are there any obstacles between the
remote control and the receiver?
The maximum signal reception distance
is 8 m. The remote control will not work
beyond this distance.
Remove the obstacles.
Is the remote control pointed at the
receiver?
Point the remote control at the receiver
on the indoor unit.
Is the remote control's sensitivity low? Are
icons blurred or missing?
Check the batteries. If the batteries are
very low, replace them.
Do icons fail to appear on the display
when you operate the remote control?
Check if the remote control is damaged.
If it is, replace it.
Is there a fluorescent light in the room? Position the remote control next to the
indoor unit.
Turn off the fluorescent light and try
again.
No air comes out
of the indoor unit
Is the indoor unit's air inlet or outlet
blocked?
Remove the obstruction.
In heat mode, has the indoor temperature
reached the set temperature?
Once the set temperature has been
reached, the indoor unit will stop blowing
out air.
Has heat mode only recently been
selected?
To prevent blasts of cold air from being
blown out, there will be a delay of
several minutes before operation begins
(this is normal).
The air
conditioner is not
working
Is there a power cut? Wait for the power to be restored.
Has the plug come loose? Reinsert the plug.
Has the circuit breaker tripped or has the
fuse blown?
Have the circuit breaker or fuse replaced
by a qualified technician.
Is the wiring faulty? Have it replaced by a qualified
technician.
Was the unit restarted immediately after
shutdown?
Wait 3 minutes and then restart the unit.
Is the setting on the remote control
correct?
Reset the function.
The indoor unit's
air outlet
produces a mist
Is the indoor temperature and humidity
high?
Indoor air cools rapidly. Wait for the
indoor temperature and humidity to fall
and the mist to disappear.
The set
temperature
cannot be
adjusted
Is the unit operating in automatic mode? The temperature cannot be adjusted in
automatic mode. Change the operating
mode if you want to adjust the
temperature.
Does the desired temperature fall outside
the available temperature range?
The available temperature range is: 16 –
30°C.
The desired level
of heating/cooling
cannot be
achieved
Is the voltage too low? Wait for the voltage to return to normal.
Is the filter dirty? Clean the filter.
Does the set temperature fall within the
available temperature range?
Adjust the temperature to within the
available range.
A
re there any doors or windows open? Close any doors and windows.
The unit is
emitting
unpleasant smells
Is there an odour source (e.g. furniture,
cigarettes, etc.)?
Eliminate the odour source.
Clean the filter.
The air
conditioner turns
on suddenly
Are there any sources of interference (e.g.
lightning, wireless devices, etc.)?
Disconnect the power supply and then
reconnect it. Turn the unit on again.
The outdoor unit
produces steam
Has heat mode been selected? Steam production when defrosting in
heat mode is a normal phenomenon.

Specyfikacje produktu

Marka: Argoclima
Kategoria: klimatyzacja
Model: ECOLIGHT 24

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Argoclima ECOLIGHT 24, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje klimatyzacja Argoclima

Argoclima

Argoclima Maya Instrukcja

28 Grudnia 2024
Argoclima

Argoclima LOKI PLUS WF Instrukcja

19 Grudnia 2024
Argoclima

Argoclima NEWAGE PLUS 9000 UI Instrukcja

7 Października 2024
Argoclima

Argoclima NEWAGE PLUS 12000 UI Instrukcja

7 Października 2024
Argoclima

Argoclima CHARM PLUS 18000 Instrukcja

3 Października 2024
Argoclima

Argoclima CHARM PLUS 12000 Instrukcja

3 Października 2024
Argoclima

Argoclima CHARM PLUS 9000 Instrukcja

3 Października 2024
Argoclima

Argoclima ECOLIGHT 24 Instrukcja

2 Października 2024
Argoclima

Argoclima GREENSTYLE PLUS 24000 UE Instrukcja

2 Października 2024
Argoclima

Argoclima ECOLIGHT 24000 UE Instrukcja

2 Października 2024

Instrukcje klimatyzacja

Najnowsze instrukcje dla klimatyzacja

Hyundai

Hyundai WSHN50DUAL9 Instrukcja

25 Marca 2025
VOX

VOX PMF09CH Instrukcja

18 Marca 2025
VOX

VOX PQF12CH Instrukcja

18 Marca 2025
VOX

VOX PQA12C Instrukcja

18 Marca 2025
VOX

VOX PMJ09C Instrukcja

18 Marca 2025
Toshiba

Toshiba RAC-WK1011ESCWU Instrukcja

18 Marca 2025
Toshiba

Toshiba RAC-WK0812ESCWRU1 Instrukcja

18 Marca 2025
Midea

Midea AG16Black-24NXD0-I Instrukcja

12 Marca 2025
Midea

Midea MSX-12NXD0 Instrukcja

12 Marca 2025
Midea

Midea AEP2-12NXD6-I Instrukcja

12 Marca 2025