Instrukcja obsługi Aputure amaran T2c

Aputure Ulga amaran T2c

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Aputure amaran T2c (13 stron) w kategorii Ulga. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/13
Product Manual
English
amaran T2c
by
Foreword
IMPORTANT SAFETY INSTRUCTIONS
- 2 -
When using this unit, basic safety precautions should always be followed, including
the following:
Thank you for purchasing "amaran" LED photography lights - amaran T2c.
Amaran T2c is amaran newly designed cost performance light fixture. Compact
structure design, compact and light , excellent texture. Has a high performance
level, such as high brightness, high color rendering index, can adjust the brightness,
etc. It can be used with variety of lighting accessories to achieve lighting effects and
enrich product usage patterns. So that the product to meet the needs of different
occasions light control, easy to achieve professional level photography.
1. Read and understand all instructions before using.
2. Close supervision is necessary when any fixture is used by or near children.
Do not leave the fixture unattended while in use.
3. Care must be taken as burns can occur from touching hot surfaces.
4. Do not operate the fixture if a cord is damaged, or if the fixture has been
dropped or damaged, until it has been examined by qualified service personnel.
5. Position any power cables such that they will not be tripped over, pulled,
or put into contact with hot surfaces.
6. If an extension cord is necessary, a cord with an amperage rating at least equal to
that of the fixture should be used. Cords rated for less amperage than the fixture
may overheat.
7. Always unplug the lighting fixture from the electrical outlet before cleaning
and servicing, or when not in use. Never yank the cord to remove the plug from
the outlet.
8. Let the lighting fixture cool completely before storing. Unplug the power cable
from lighting fixture before storing and store the cable at assigned space of the
carrying case.
9. To reduce the risk of electric shock, do not immerse this fixture in water or any
other liquids
10. To reduce the risk of fire or electric shock, do not disassemble this fixture.
Contact cs@aputure.com or take the lighting fixture to qualified service personnel
when service or repair is required. Incorrect reassembly may cause electric shock
when the lighting fixture is in use.
11. The use of any accessory attachment not recommended by the manufacturer
may increase the risk of fire, electric shock, or injury to any persons operating the
fixture.
12. Please power this fixture by connecting it to a grounded outlet.
13. Please do not block the ventilation or do not look at the LED light source directly
when it is powered on. Please do not touch the LED light source in any condition.
14. Please do not place the LED lighting fixture near any flammable object.
15. Only use a dry microfiber cloth to clean the product.
FCC Compliance Statement
16. Please do not use the light fixture in wet condition on account of electric shock
may be caused.
17. Please have the product checked by an authorized service personnel agent if
the product has a problem. Any malfunctions caused by unauthorized disassembly
are not covered by the warranty. The user may pay for maintenance.
18. We recommend only using the original Aputure cable accessories. Please note
that any malfunctions caused by using unauthorized accessories are not covered by
the warranty. The user may pay for maintenance.
19. This product is certified by RoHS, CE, KC, PSE, and FCC. Please operate the product
in full compliance with relevant country's standards. Any malfunctions caused by
incorrect use are not covered by warranty. The user may pay for maintenance.
20. The instructions and information in this manual are based on thorough,
controlled company testing procedures. Further notice will not be given if the
design or specifications change.
SAVE THESE INSTRUCTIONS
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that
may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate the
equipment.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or televisionreception,
which can be determined by turning the equipment off and on, the user is
encouraged to try reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment to an outlet on a different circuit than the receiver is
connected to.
Consult the dealer or an experienced radio/TV technician for help.
This device has been evaluated to meet general RF exposure requirements.
- 3 -


Specyfikacje produktu

Marka: Aputure
Kategoria: Ulga
Model: amaran T2c

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Aputure amaran T2c, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Ulga Aputure

Aputure

Aputure AL-MT9 Instrukcja

9 Października 2024
Aputure

Aputure amaran 100x Instrukcja

9 Października 2024
Aputure

Aputure amaran SM5c Instrukcja

9 Października 2024
Aputure

Aputure amaran 100x S Instrukcja

9 Października 2024
Aputure

Aputure amaran 200x S Instrukcja

9 Października 2024
Aputure

Aputure amaran T2c Instrukcja

9 Października 2024
Aputure

Aputure amaran P60x Instrukcja

9 Października 2024
Aputure

Aputure MT Pro Instrukcja

9 Października 2024
Aputure

Aputure amaran T4c Instrukcja

9 Października 2024

Instrukcje Ulga

Najnowsze instrukcje dla Ulga

Goobay

Goobay 30780 Instrukcja

15 Października 2024
QTX

QTX DM-X12 Instrukcja

15 Października 2024
Livarno

Livarno IAN 94799 Instrukcja

15 Października 2024
Astro

Astro Denia Instrukcja

13 Października 2024
AFX

AFX Grace GRCP07CBBK Instrukcja

12 Października 2024
AFX

AFX Point PNTP0107L30D1BK Instrukcja

12 Października 2024
Neewer

Neewer TL97C Instrukcja

9 Października 2024
Neewer

Neewer SRP18C Instrukcja

9 Października 2024
Ikea

Ikea STRÅLA 005.824.56 Instrukcja

9 Października 2024
Ikea

Ikea STRÅLA 705.829.38 Instrukcja

9 Października 2024