Instrukcja obsługi Aperion Intimus 5B

Aperion głośnik Intimus 5B

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Aperion Intimus 5B (4 stron) w kategorii głośnik. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/4
18151 SW Boones Ferry Road , P ortland OR 97224
- 888 . 8 80.8992
Intimus 5B
5.25" 2-Way Bookshelf Speaker
Owner’s Guide
Features
• 1" Audiophile-grade silk-dome tweeter
• 5.25" Woven fiberglass composite woofer
• HD-X3™ Impedance leveling crossover
technology
• Magnetic shielding
• Furniture-grade finish
• 5-Way gold-plated binding posts
• Anti-Resonant Cabinet
• Acoustically transparent grille
Specifications
Frequency Response: (+/- 3dB) 75-20,000 Hz
(+/- 6dB) 62-22,000 Hz
Nominal Impedance: 6 Ohms
Sensitivity: 84 dB
Recommended Power: 50 - 150 Watts
Driver Configuration: 2-Way
Enclosure: Ported, 1" HDF
Dimensions: 12" H x 6.75" W x 8" D
Weight: 14 lbs.
Connections
To connect your speaker to your receiver you will
need standard 2 conductor, stranded speaker
wire. For instructions on installation, please read
below.
Preparing the Wire
1) Separate the last 4" of your speaker wire into
two pieces.
2) Strip 1/2" off the shielding off of the end of
each wire (see A below).
3) Twist the exposed copper strands with your
fingers until they are tightly unified. Be sure
there are no “flyaway” strands (see B below).
If You’re Using Bare Wire
1) Unscrew the binding posts on the back of
your speaker by turning counter-clockwise.
2) Insert the bare speaker wire into the hole in
the binding post and tighten it securely by
turning clockwise.
If You’re Using Banana Plugs
1) Be sure to follow the instructions on your
banana plugs to attach them to the wire.
2) Screw the binding posts in completely by
turning clockwise.
3) Insert them into the open end of the binding
post.
Note: As you make your connections, be sure to
connect the positive terminals on your receiver
to the positive terminals on your speakers.
Most two conductor wire has screen printing on
one side to help you differentiate between the
two strands (see image below).
AB
CA UTI O N
RISK OF ELECTRIC S HOCK
DO NOT OPEN
+
-
+
-
Features, Specifications, and Connections
2) In the crossover menu, select a crossover
point of 80Hz. If you’d like, you may set the
crossover point anywhere from 80Hz - 100Hz to
satisfy your listening tastes. (If your speakers are
set to “Large” your receiver should automatically
bypass the crossover.)
3) In the speaker distance menu, measure and
input the distance between your primary listen-
ing position and your speakers (see 2 below).
4) In the channel level menu you can set the vol-
ume level for each of the speakers in your system
(see 3 below). The goal is to adjust each speaker
to be the same loudness at your listening posi-
tion. You can set this by ear, but we recommend
using an SPL meter for best results. An SPL
meter can be purchased on our website. www.
aperionaudio.com.
Placement Recommendations
Each room is unique and unless the room was
specifically designed to be a home theater, its
acoustic properties will not be perfect. How-
ever, the following guidelines will help you get
the most out of your speakers. Try to match the
placement diagrams below as closely as you
can. If you’re using them as a surround speak-
ers, they should be placed about two feet above
the listeners’ ears. Also, don’t be afraid to ex-
periment with placement. Often a small differ-
ence in placement can yield a big improvement
in sound.
Setup
Setting up speakers through your multi-channel
receiver only requires a few simple steps. You
may have a receiver that has an auto calibra-
tion microphone, and while these are conve-
nient, they are not always accurate. For best
results, we recommend accessing the setup
menu of your receiver and manually setting up
the speakers. Most modern receivers use an On
Screen Display setup menu (OSD) that makes
setup a breeze.
1) In your receiver’s setup menu, go to “Speak-
er Setup” or “Speaker Configuration”. The
setting for this speaker should be “Small” (See
1 below).
Speaker Distance
Quit: SETUP
a. Units
b. Front L/R
c. Center
d. Surr Right
e. Surr Back R
f. Surr Back L
g. Surr Left
h. Subwoofer
feet
:12.0
:12.0
:11.0
:10.5
:8
:10
:13
2
Level Calibration
Quit: SETUP
a. Left
b. Center
c. Right
d. Surr Right
e. Surr Back R
f. Surr Back L
g. Surr Left
h. Subwoofer
: +1dB
: +6dB
: 0dB
: +3dB
: +7dB
: +5dB
: +5dB
: +6dB
3
a. Subwoofer
b. Front
c. Center
d. Surr L/R
e. Surr Back
:Yes
:Small
:Small
:Small
Quit: SETUP
1
:Small
Ideal Stereo Placement
45 to 60
Ideal Home Theater Placement
45 to 60
Left Front Right Front
Center
Left
Surround
Right
Surround
Back Right
Surround
Back Left
Surround
Left Front Right Front
Placement and Setup

Specyfikacje produktu

Marka: Aperion
Kategoria: głośnik
Model: Intimus 5B

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Aperion Intimus 5B, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje głośnik Aperion

Aperion

Aperion Intimus 5B Instrukcja

20 Września 2024
Aperion

Aperion Zona Instrukcja

20 Września 2024
Aperion

Aperion Verus Grand Instrukcja

17 Września 2024

Instrukcje głośnik

Najnowsze instrukcje dla głośnik

Yamaha

Yamaha DZR10-D Instrukcja

11 Grudnia 2024
Yamaha

Yamaha DZR15-D Instrukcja

11 Grudnia 2024
Yamaha

Yamaha DXS15XLF-D Instrukcja

11 Grudnia 2024
Yamaha

Yamaha NS-2000A Instrukcja

11 Grudnia 2024
Bogen

Bogen WMT1AS Instrukcja

11 Grudnia 2024
Ruark Audio

Ruark Audio Sabre-R Instrukcja

11 Grudnia 2024
Antelope

Antelope R4S Instrukcja

11 Grudnia 2024
Antelope

Antelope Atlas i8 Instrukcja

11 Grudnia 2024
MB

MB PESSPROVS62A Instrukcja

11 Grudnia 2024
MB

MB PESSPROVS32A Instrukcja

11 Grudnia 2024