Instrukcja obsługi APC Mobile Power Pack M12USWH
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla APC Mobile Power Pack M12USWH (2 stron) w kategorii bank mocy. Ta instrukcja była pomocna dla 7 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/2
User Manual
Mobile Power Pack M12USWH
I
Charge USB Devices
Charge devices using the original
USB cable that comes with the
unit, or another USB charging
cable.
Connect the mobile power pack
with the device to be charged and
press the POWER button for
about 1 second.
Charge the Power Pack
Inventory Safety and General
Information
Read this user manual carefully
before using the product, and
keep it for future reference.
• Do not short circuit this device. To avoid short
circuit, keep the device away from any metal
objects (e.g., hair clips and keys).
• It is normal that the battery will feel warm
during heavy use.
• Use this device as instructed to avoid electric
shock; do not disassemble.
• This unit is not user repairable; contact APC for
tech support related issues.
• CAUTION
RISK OF FIRE AND BURNS.
Do not open, crush, heat above 40°C or
incinerate. Follow manufacturer's instructions.
• During normal usage keep the device out in the
open to allow excess heat to dissipate.
• Charge M12USWH for 2.5 hours before initial
use.
• Keep the USB output port and micro-USB input
port clean and free of obstruction.
Failure to follow these instructions can result in
equipment damage.
Use the included charging cable
to connect the USB output port
of a USB charger or PC to the
micro-USB input port on the
power pack. (Note: some PCs in
sleep mode do no provide output
power to the USB port)
By USB charger By PC
.
LED Status Indicators
To check the remaining battery
charge of this device in standby
mode, press the POWER button
for about 1 second. The battery
capacity display will display
ho w mu ch ba ttery p owe r is
remaining
Indicator
Status Battery Full Battery
charging
Battery
inserted into
the UPS
Fault detected
on USB ports
Mobile
Power Pack
LEDs
All 5 LEDs
illuminate green
LEDs indicate
charge level.
Top LED
flashes.
One LED
illuminates
green from
bottom to top
All 5 LEDs
flash green
ma
001
a
Front View
m
a
002
a
Rear View
POWER button
1.0A USB port
2.4A USB port
Capacity Indicator LEDs
UPS connector (for use with BGE50ML only)
Micro-USB input
User Manual
USB cable
81-100%
61-80%
41-60%
21-40%
0-20%
Note: The charge times in this table
are approximate figures.
Device M12USWH
Smartphone 5x
Tablet ~ 1x
© 2015 APC by Schneider Electric. APC and the APC logo are owned by Schneider
Electric Industries S.A.S., or their affiliated companies. All other trademarks are
property of their respective owners.
EN 990-9674
03/2015
Using the mobile power pack with a UPS
This mobile power pack can be plugged into the APC Back-UPS
Connect BGE50ML to provide AC power backup for low power
networking equipment and also DC power via USB. The fastest way
to charge the mobile power pack is to charge it inside the UPS where
it will fully charge the battery in 2.5 hours. Simply insert the battery
into the opening in the front of the UPS. The battery can only go in
one direction, with the LEDs on top and USB ports on the bottom.
When plugged in the mobile power pack charges much faster than
when using the standard micro-USB input. To remove the mobile
power pack, simply pull the battery out.
Troubleshooting
Specifications
*1 The two (2) USB ports combined have a maximum output of
3.4A. If two (2) devices together draw more than 3.4A, overload
protection circuits will trigger and disable output.
APC by Schneider Electric IT
Customer Support Worldwide
For country specific customer support, go to the APC by
Schneider Electric Web site, www.apc.com.
Problem and Possible Cause Solution
The mobile power pack cannot be charged.
The PC is in sleep mode. Wake PC from sleep mode.
The temperature is outside of the recommended
temperature range for use. Stop using the mobile power pack until it is within the correct
temperature range.
The charging cable is malfunctioning. Carefully check if the charging cable is functioning. Clean the micro-
USB port in case there is an obstruction.
The mobile power pack cannot charge some devices.
The mobile power pack is not powered on. Press the POWER button on the mobile power pack.
The remaining capacity of the mobile power pack
is low. Charge the mobile power pack.
The mobile power pack’s automatic load detection
has detected no load and has powered off the unit. Press the POWER button on the mobile power pack.
The mobile power pack does not recognize or
detect the devices connected to it. Remove connected devices. Turn the unit on, reconnecting each
device one at a time. Some devices may require a dedicated charging
cable. The cable included with this device is a standard data cable.
The mobile device has overloaded the USB port or
a short circuit has occurred in the mobile device
connected to the mobile power pack.
When the USB port encounters an error such as overload or a short,
the mobile power pack will flash all LEDs. If the error is not
removed the mobile power pack will enter into safe mode after 30
seconds. To deactivate safe mode, disconnect all devices from the
mobile power pack press the POWER button or connect the mobile
power pack to a USB charger as if charging.
The life of the mobile power pack has expired or a
fault has been detected. In the case where a system fault has been detected, contact your local
APC by Schneider Electric dealer or authorized APC by Schneider
Electric service agency.
Type Lithium-ion battery
Capacity 11400mAh
Rating 41.2 Wh
Input current (Maximum) micro-USB: 2.1A
Rated input voltage 5V dc
Output current USB1: 2.4A, USB2: 1.0A
Output voltage 5V
Capacity indicator light 5 level LEDs
Capacity indicator
brightness levels 50% in the UPS. As mobile power
pack 100% after pressing the POWER
button. 10% after 20 seconds when
charging a device or being charged.
Charging time 2.5 hours (UPS), 8 hours (micro-USB)
Dimensions (L x W x H) 5.1 x 2.9 x 0.9 in (13.0 x 7.4 x 2.2 cm)
Weight 0.6 lb (267g)
Operating temperature 32°F- 104°F (0°C- 40°C)
Smart Charging (2.4A
port only) Maximum output depends on the
client device.
b
u42
3a
bu4
24a
Battery Recycling
Information
Always dispose of used or spent batteries
properly.
Return the spent battery to an appropriate
facility for proper disposal and recycling.
Warranty
Schneider Electric IT (SEIT) warrants its products
to be free from defects in materials and
workmanship for a period of three (3) years from
the date of purchase. SE IT obligation under this
warranty is limited to repairing or replacing, at its
sole discretion, any such defective products. This
warranty does not apply to battery wear from use,
equipment that has been damaged by accident,
negligence or misapplication or has been altered
or modified in any way. SEIT standard procedure
is to replace the original unit with a factory
reconditioned unit. Customers who must have the
original unit back due to the assignment of asset
tags and set depreciation schedules must declare
such a need at first contact with an SEIT Technical
Support representative. SEIT will ship the
replacement unit once the defective unit has been
received by the repair department, or cross ship
upon the receipt of a valid credit card number. The
customer pays for shipping the unit to SEIT. SEIT
pays ground freight transportation costs to ship the
replacement unit to the customer. For full warranty
information refer to www.apc.com.
Specyfikacje produktu
| Marka: | APC |
| Kategoria: | bank mocy |
| Model: | Mobile Power Pack M12USWH |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z APC Mobile Power Pack M12USWH, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje bank mocy APC
6 Września 2024
2 Września 2024
27 Sierpnia 2024
22 Sierpnia 2024
22 Sierpnia 2024
20 Sierpnia 2024
6 Lipca 2024
24 Maja 2024
Instrukcje bank mocy
- bank mocy Samsung
- bank mocy Sven
- bank mocy Xiaomi
- bank mocy Lenovo
- bank mocy TP-Link
- bank mocy Voltcraft
- bank mocy Philips
- bank mocy Livoo
- bank mocy SilverCrest
- bank mocy LC-Power
- bank mocy Conceptronic
- bank mocy Asus
- bank mocy Nedis
- bank mocy Lenco
- bank mocy Bluetti
- bank mocy Majestic
- bank mocy Blaupunkt
- bank mocy Speed-Link
- bank mocy Einhell
- bank mocy Manhattan
- bank mocy Tripp Lite
- bank mocy SBS
- bank mocy Cooler Master
- bank mocy Jackery
- bank mocy Scosche
- bank mocy Icy Box
- bank mocy RYOBI
- bank mocy Natec
- bank mocy Gembird
- bank mocy Mestic
- bank mocy Lindy
- bank mocy Deltaco
- bank mocy Cobra
- bank mocy Trust
- bank mocy BLUEPALM
- bank mocy V7
- bank mocy LogiLink
- bank mocy Dell
- bank mocy AgfaPhoto
- bank mocy V-TAC
- bank mocy Ledlenser
- bank mocy Krüger&Matz
- bank mocy Emos
- bank mocy Ansmann
- bank mocy Cellular Line
- bank mocy Fresh 'n Rebel
- bank mocy Totolink
- bank mocy DreamGEAR
- bank mocy Pyle
- bank mocy Iogear
- bank mocy NGS
- bank mocy Monster
- bank mocy Zipper
- bank mocy ADATA
- bank mocy GoClever
- bank mocy Maginon
- bank mocy GoGen
- bank mocy Intenso
- bank mocy Brandson
- bank mocy Prestigio
- bank mocy Maglite
- bank mocy Aluratek
- bank mocy Hama
- bank mocy Busch + Müller
- bank mocy Verbatim
- bank mocy Goobay
- bank mocy Schwaiger
- bank mocy Insignia
- bank mocy Veripart
- bank mocy Vakoss
- bank mocy CAT
- bank mocy Denver
- bank mocy Anker
- bank mocy Hitachi
- bank mocy SereneLife
- bank mocy Silverstone
- bank mocy Boompods
- bank mocy CyberPower
- bank mocy EcoFlow
- bank mocy Klein Tools
- bank mocy Trevi
- bank mocy Technaxx
- bank mocy GPX
- bank mocy Vivanco
- bank mocy PowerPlus
- bank mocy Xtorm
- bank mocy Tascam
- bank mocy Laser
- bank mocy WAGAN
- bank mocy Best Buy
- bank mocy Adj
- bank mocy Power Traveller
- bank mocy Weather X
- bank mocy Fontastic
- bank mocy EGO
- bank mocy Mophie
- bank mocy Clas Ohlson
- bank mocy Savio
- bank mocy Varta
- bank mocy Belkin
- bank mocy ToughTested
- bank mocy Digipower
- bank mocy Goodis
- bank mocy Twelve South
- bank mocy ACME
- bank mocy Targus
- bank mocy Exibel
- bank mocy Auto Joe
- bank mocy Hähnel
- bank mocy Aukey
- bank mocy Brigmton
- bank mocy Sunstech
- bank mocy Techly
- bank mocy BlueBuilt
- bank mocy Ednet
- bank mocy Celestron
- bank mocy Steren
- bank mocy Audiosonic
- bank mocy Sandberg
- bank mocy Phoenix
- bank mocy Grixx
- bank mocy Konig
- bank mocy Valueline
- bank mocy Sweex
- bank mocy Waka Waka
- bank mocy Zagg
- bank mocy Leitz
- bank mocy Veho
- bank mocy Zens
- bank mocy Projecta
- bank mocy Vorago
- bank mocy IOttie
- bank mocy Iget
- bank mocy Emtec
- bank mocy Celly
- bank mocy XLayer
- bank mocy Wentronic
- bank mocy Urban Revolt
- bank mocy RAVPower
- bank mocy Satechi
- bank mocy Skullcandy
- bank mocy 4smarts
- bank mocy Monoprice
- bank mocy Avanca
- bank mocy Xline
- bank mocy Panamax
- bank mocy SKROSS
- bank mocy Vantec
- bank mocy IWalk
- bank mocy Mediacom
- bank mocy Auto-T
- bank mocy I.Sound
- bank mocy Billow
- bank mocy Techlink
- bank mocy Woxter
- bank mocy Maxell
- bank mocy Jupio
- bank mocy Energizer
- bank mocy Zalman
- bank mocy SunChargers
- bank mocy SIIG
- bank mocy Maxfield
- bank mocy Gp Batteries
- bank mocy Ross
- bank mocy Kogan
- bank mocy Duracell
- bank mocy Cygnett
- bank mocy Promate
- bank mocy Leotec
- bank mocy Tecxus
- bank mocy Iconbit
- bank mocy Goal Zero
- bank mocy CasePower
- bank mocy PNY
- bank mocy Bachmann
- bank mocy Alogic
- bank mocy Lenmar
- bank mocy Perfect Choice
- bank mocy Canyon
- bank mocy TSST Global
- bank mocy GP
- bank mocy Decoded
- bank mocy Silicon Power
- bank mocy Verico
- bank mocy Renogy
- bank mocy The Kase
- bank mocy Hamlet
- bank mocy Raidsonic
- bank mocy Approx
- bank mocy Bauhn
- bank mocy Voxx
- bank mocy Mizco
- bank mocy SACK It
- bank mocy Case-mate
- bank mocy Luxa2
- bank mocy Vultech
- bank mocy Urban Factory
- bank mocy Kanex
- bank mocy Yoobao
- bank mocy Atlantis Land
- bank mocy DCU
- bank mocy Zendure
- bank mocy Omnicharge
- bank mocy ACOPower
- bank mocy Rivacase
Najnowsze instrukcje dla bank mocy
13 Marca 2025
13 Marca 2025
10 Marca 2025
25 Lutego 2025
11 Lutego 2025
8 Lutego 2025
7 Lutego 2025
7 Lutego 2025
7 Lutego 2025
15 Stycznia 2025