Instrukcja obsługi APC GUPXC75FS


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla APC GUPXC75FS (52 stron) w kategorii nieskategoryzowany. Ta instrukcja była pomocna dla 22 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/52
Gutor PXC
25-100 kVA
Operation
03/2018
www.schneider-electric.com
Legal Information
The Schneider Electric brand and any registered trademarks of Schneider Electric
Industries SAS referred to in this guide are the sole property of Schneider Electric
SA and its subsidiaries. They may not be used for any purpose without the owner's
permission, given in writing. This guide and its content are protected, within the
meaning of the French intellectual property code (Code de la propriété
intellectuelle français, referred to hereafter as "the Code"), under the laws of
copyright covering texts, drawings and models, as well as by trademark law. You
agree not to reproduce, other than for your own personal, noncommercial use as
defined in the Code, all or part of this guide on any medium whatsoever without
Schneider Electric's permission, given in writing. You also agree not to establish
any hypertext links to this guide or its content. Schneider Electric does not grant
any right or license for the personal and noncommercial use of the guide or its
content, except for a non-exclusive license to consult it on an "as is" basis, at your
own risk. All other rights are reserved.
Electrical equipment should be installed, operated, serviced, and maintained only
by qualified personnel. No responsibility is assumed by Schneider Electric for any
consequences arising out of the use of this material.
As standards, specifications, and designs change from time to time, please ask for
confirmation of the information given in this publication.
25-100 kVA
Table of Contents
Important Safety Instructions — SAVE THESE
INSTRUCTIONS .........................................................................................5
FCC Statement ..........................................................................................6
Safety Precautions .....................................................................................6
Overview ......................................................................................................9
UPS without Transformer ............................................................................9
System Overview..................................................................................9
UPS with Transformer............................................................................... 11
System Overview................................................................................ 11
User Interface ..........................................................................................15
Display...............................................................................................18
View System Status ............................................................................20
View System Configuration..................................................................21
Operation ................................................................................................... 23
Operation Modes......................................................................................23
Operation Procedures...............................................................................25
Turn on the UPS .................................................................................25
Turn off the UPS .................................................................................25
Transfer from Normal Operation to ECO Mode ......................................25
Transfer from ECO Mode to Normal Operation ......................................25
Transfer from Normal Operation to Requested Static Bypass
Operation ...........................................................................................25
Transfer from Requested Static Bypass Operation to Normal
Operation ...........................................................................................26
Transfer from Normal Operation to Maintenance Bypass
Operation ...........................................................................................26
Transfer from Maintenance Bypass Operation to Normal
Operation ...........................................................................................27
Transfer from Normal Operation or ECO Mode to Maintenance
Bypass Operation Redundant Parallel UPS System N+1.....................29
Transfer from Maintenance Bypass Operation to Normal Operation or
ECO Mode – Redundant Parallel UPS System N+1...............................30
View the Event Log .............................................................................31
Clear the Event Log ............................................................................31
View the Alarms..................................................................................31
View Diagnosis ...................................................................................32
View Statistics ....................................................................................33
Clear Statistics ...................................................................................33
Configuration .............................................................................................34
Set the Date and Time ..............................................................................34
Set Up the Display ....................................................................................34
Reset the Display Language to English ......................................................35
Set , , , and ..........................35Auto Start Auto Boost LCM Alerts ECO Mode
Set Battery Charge Mode.......................................................................... 36
Maintenance ..............................................................................................37
Replace the Filters....................................................................................37
Perform LED and Display Test ...................................................................37
990–9969B–001 3


Specyfikacje produktu

Marka: APC
Kategoria: nieskategoryzowany
Model: GUPXC75FS
Kolor produktu: Srebrny
Wysokość produktu: 2100 mm
Szerokość produktu: 1200 mm
Głębokość produktu: 800 mm
Waga produktu: 693000 g
Ilość: 1
Certyfikaty: FCC Part 15 class A\nUL 1778
Zakres temperatur (eksploatacja): -10 - 40 °C
Zakres wilgotności względnej: 0 - 95 %
Układ: Tower
Zakres temperatur (przechowywanie): -15 - 40 °C
Dopuszczalna wilgotność względna: 0 - 95 %
Dopuszczalna wysokość podczas eksploatacji (n.p.m.): 0 - 3048 m
Dopuszczalna wysokość (n.p.m.): 0 - 5000 m

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z APC GUPXC75FS, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje nieskategoryzowany APC

Instrukcje nieskategoryzowany

Najnowsze instrukcje dla nieskategoryzowany

Meec Tools

Meec Tools 010-084 Instrukcja

6 Października 2024
Outwell

Outwell Scenic Road 250 Instrukcja

5 Października 2024
Impact

Impact QuikBalance Instrukcja

4 Października 2024
Impact

Impact CA-112 Instrukcja

4 Października 2024
Impact

Impact LS-BHA Instrukcja

4 Października 2024
Impact

Impact LKB-5C Instrukcja

4 Października 2024
Impact

Impact RST-001 Instrukcja

4 Października 2024