Instrukcja obsługi Apart SUBLIME-W

Apart subwoofer SUBLIME-W

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Apart SUBLIME-W (8 stron) w kategorii subwoofer. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/8
The APart SUBLIME subwoofer is designed to reproduce a fat and deep bass despite its slim
dimensions.
This subwoofer is the ideal partner for the APart MASK2 satellite speakers. A custom made lter and
protection circuitry is incorporated inside the SUBLIME speaker, allowing optimal blending with the
MASK2 satellite speakers.
Optionally, you can use the SUBLIME speaker in an active speaker setup, using an active lter and
separate power amplier. You can use the SUBLIME up to 200 Hz.
The cabinet is only 12 cm deep, and the speaker and connection terminals are invisible when mounted
on the wall using the included wall mounting brackets.
It may look like a small heating radiator when mounted to the wall, but instead of heat, it will radiate
musical vibes in your room.
Due to its discrete design and small dimensions, the subwoofer is very easy to integrate even in the
most demanding environments. You can use it lying at on the oor, hide it under a bench, behind the
curtains, or even mount it on the wall using the included wall mounting brackets.
In order to get the most satisfying sound, it is essential that you read this section carefully prior to
connecting the subwoofer to your system.
It is generally believed that low frequencies are nondirectional and therefore, placement of a subwoofer
within the listening room is not critical ... however :
Please note that the performance of the subwoofer is directly related to its placement in the
listening room.
Placement close to a room corner, will increase the amount of bass output, while placing the subwoofer
along the middle of a wall, or out in the middle of a room will decrease the amount of bass output.
Experiment with a number of different placement options to nd the one that best suits your particular
room and musical taste.
Other locations will provide varying degrees of low bass impact and blending with your front speakers.
We recommend listening to your system, with the subwoofer in different room positions,
to obtain a location with an optimum response.
If you hear too little bass : try moving the subwoofer further towards the room corner or try reversing the
polarity of the satellites (phase reverse).
IMPORTANT NOTES: this speaker will perform awlessly only when you follow our
amplier and system recommendations.
Do not apply clipped or overloaded signals. Do not apply high power bass lower than 50 Hz.
This speaker is NOT magnetically shielded, so if you have a CRT screen, place the speaker at sufcient
distance from the screen. Modern plasma, LCD, TFT or LED screens are insensitive to magnetic
interference, so you can install this speaker close to such devices without limitations.
For possible and supported speaker/amp combinations, ask your dealer or take a look at our speaker
sets on our website :
www.apart-audio.com
We recommend to use the subwoofer mounted to the wall. Special mounting brackets are included.
First, position the subwoofer on a table with the connection terminals facing up (towards you).
Protect the surface by using the packing material. A speaker template with the location of the drill holes
is included with the subwoofer. Position the SPEAKER template on the subwoofer’s backplate and drill
the mounting holes with a 2 mm drill. Fix the brackets on the backplate.
Next, position the WALL template on the wall and mark the drill holes.
Fix the remaining brackets on the wall. Connect the speaker cable to the terminals.
Carefully slide the subwoofer over the wall brackets and push it rmly in place.
A few millimeters of tolerance allows you a nice t, and also some extra suspension,
resulting in good acoustical insulation from the wall.
This speaker has been carefully packed at the factory. Open the carton box and remove the speaker
from the packing. Do not use sharp objects to remove the protective bag from the speaker.
Place the speaker on a at surface. The mounting brackets are included in the packing.
When the product shows signs of damage caused by transportation, contact your dealer immediately.
Damage due to transport and rough handling is not covered by the manufacturers warranty.

Specyfikacje produktu

Marka: Apart
Kategoria: subwoofer
Model: SUBLIME-W

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Apart SUBLIME-W, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje subwoofer Apart

Apart

Apart LOUNGESET-BL Instrukcja

5 Października 2024
Apart

Apart Sublime Instrukcja

3 Października 2024
Apart

Apart SUBLIME-W Instrukcja

18 Września 2024
Apart

Apart SUB2201-BL Instrukcja

9 Sierpnia 2024
Apart

Apart SUB2201-W Instrukcja

5 Lipca 2024

Instrukcje subwoofer

Najnowsze instrukcje dla subwoofer

JL Audio

JL Audio SGR-10TW3 Instrukcja

13 Października 2024
Teufel

Teufel T6 Instrukcja

13 Października 2024
Polk

Polk DB1040 Instrukcja

10 Października 2024
OSD Audio

OSD Audio NERO DUAL X8 Instrukcja

9 Października 2024
OSD Audio

OSD Audio NERO WSA Instrukcja

9 Października 2024
Kicker

Kicker 51CWQ102 Instrukcja

9 Października 2024
Kicker

Kicker 51CWQ122 Instrukcja

9 Października 2024
Kicker

Kicker 43C84 Instrukcja

9 Października 2024
Kicker

Kicker 51CWQ124 Instrukcja

9 Października 2024
OSD Audio

OSD Audio FS12 Instrukcja

9 Października 2024