Instrukcja obsługi Antec SP1


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Antec SP1 (20 stron) w kategorii głośnik. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/20
User Manual
Manuel d’ utilisation
Getting Started
Please fully charge SP1 before initial use. Connect the included
Micro-USB cable to your SP1 and a USB slot of any PC or Mac to
charge. The RED LED will turn on while charging and will turn off
when fully charged.
Push and hold the center button for 6-8 seconds until the LED
constantly flashes white. You are now in Pairing Mode. See your
phone/music device manual for pairing instructions.
Pairing Mode
EN
Volume down Volume up
Center Button
Troubleshooting
The device is malfunctioning
• Always check for proper charge and make sure that the device is On
The device is creating distortion or the sound quality is poor
• Lower the volume on the SP1 and increase the volume on your phone
or device
• Connect the SP1 directly to your device using the 3.5 mm cable
• Check the charge of the SP1 and your mobile audio device and recharge
if necessary
• Re-pair the devices using the instructions listed under the “Pairing
Mode” section
The SP1 fails to pair with Bluetooth enabled device
• Confirm that your device is Bluetooth compatible and that the Bluetooth
setting is enabled
• Re-pair the devices following the instructions listed under the “Pairing
Mode” section
The signal drops or connection fails in Bluetooth mode
• Move the SP1 closer to your mobile device
Answer/End Calls
Press the center button to answer and end calls.
To Make a Call
Use your phone to dial. Your SP1 will then function as a speakerphone.
EN


Specyfikacje produktu

Marka: Antec
Kategoria: głośnik
Model: SP1

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Antec SP1, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje głośnik Antec

Antec

Antec SP-0 Instrukcja

27 Września 2024
Antec

Antec Rockus 3D 2.1 Instrukcja

27 Września 2024
Antec

Antec SP1 Instrukcja

8 Września 2024

Instrukcje głośnik

Najnowsze instrukcje dla głośnik