Instrukcja obsługi Anova D226


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Anova D226 (38 stron) w kategorii Podcinacz. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/38
D226
Owner s Manual (4 in 1): Petrol Brush cuer Petrol grass trimmer Petrol Pole Pruner / /
Long-reach petrol combuson engine hedge trimmer
English 1
INFORMATION TO SYMBOLS
Symbols
WARNING! A brush cutter or trimmer can be dangerous if used incorrectly or
carelessly, and can cause serious or fatal injury to the operator others. It is or
extremely important that you read and understand the contents of this owners
manual.
Please read the operators manual carefully and make sure you understand the
instructions before using the machine.
Always w r: ea
A protective helmet where there is a risk of falling objects
Approved hearing protection
Approv e protection ed ey
Max. speed of output shaft (if applicable) r , pm
Watch out for thrown objects and ricochets.
Wear sturdy, non-slip boots.
Always wear approved protective gloves.
Do not use saw blades
The operator of the machine must ensure, while working, that no persons or
anima come closer than 15 metres. ls
Machines tted with sa blades or ass blades can w gr be thro violently to wn
the side when the blade comes into contact with a fix object. This is called ed
blade thrust. The blade is capab le of an or amputating arm leg. ways k Al eep
people and animals least metres from the machine. at 15
Keep the machine a sucient distance away from electrical power lines.
Noise emission to the environment according to the European Community s
Directive. The machine s emission is specied in chapter Technical data and
on label.
English 2
INFORMATION TO SYMBOLS
Close the choke.
Open the choke.
The screw beside the "T" stamp is The Idle-speed adjustment screw.
The screw beside the "H" stamp is The High-speed adjustment screw.
The screw beside the "L" stamp is The Low-speed adjustment screw.
This machine shall always e a mixture of petrol and two-stroke oil. us
The chain oil tank
Adjust the oil pump
If you turn the rod by screwdriver follow the arrow to the "MAX" position, the
chain oil ow increase, and if you turn to the "MIN" position, decrease.
Shows the direction of the saw chain installation.
Machine can equip a typical metal blade three teeth blade.
Machine can equip a typical metal blade four teeth blade.
Do not use saw blades.
An arrow indicating rotation direction of cutting attachment.


Specyfikacje produktu

Marka: Anova
Kategoria: Podcinacz
Model: D226

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Anova D226, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Podcinacz Anova

Anova

Anova D546HXP Instrukcja

29 Grudnia 2024
Anova

Anova D226 Instrukcja

29 Grudnia 2024
Anova

Anova D553 Instrukcja

8 Października 2024
Anova

Anova D545 Instrukcja

8 Października 2024
Anova

Anova D536 Instrukcja

8 Października 2024
Anova

Anova D526 Instrukcja

8 Października 2024

Instrukcje Podcinacz

Najnowsze instrukcje dla Podcinacz