Instrukcja obsługi Andis AGC2

Andis kosiarka AGC2

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Andis AGC2 (20 stron) w kategorii kosiarka. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/20
USE AND CARE
MODEL AGC2
LITERATURE PACKET #04959
Item pictured may differ from actual product
El artículo ilustrado puede diferir del producto real
Il est possible que l’article sur la photo soit différent du produit réel
2
E N G L I S H
Congratulations – you just went first class when you bought this Andis
product. Careful workmanship and quality design have been the hallmarks of
Andis products since 1922.
IMPORTANT SAFEGUARDS
When using an electrical appliance, basic precautions should always
be followed, including the following: Read all instructions before
using the Andis clipper.
DANGER: To reduce the risk of electric shock:
1. Do not reach for an appliance that has fallen into water. Unplug
immediately.
2. Do not use while bathing or in a shower.
3. Do not place or store appliance where it can fall or be pulled into
a tub or sink. Do not place in or drop into water or other liquid.
4. Always unplug this appliance from the electrical outlet
immediately after using.
5. Unplug this appliance before cleaning, removing or assembling parts.
WARNING: To reduce the risk of burns, fire electric shock,
or injury to persons:
1. An appliance should never be left unattended when plugged in.
2. Close supervision is necessary when this appliance is used by, on
or near children or individuals with certain disabilities.
3. Use this appliance only for its intended use as described in this
manual. Do not use attachments not recommended by Andis.
4. Never operate this appliance if it has a damaged cord or plug, if it
is not working properly, if it has been dropped or damaged, or
dropped into water. Return the appliance to an Andis Authorized
Service Station for examination and repair.
5. Keep the cord away from heated surfaces.
6. Never drop or insert any object into any opening.
7. Do not use outdoors or operate where aerosol (spray) products
are being used or where oxygen is being administered.
3
8. Do not use this appliance with a damaged or broken blade or
comb, as injury to the skin may occur.
9. To disconnect turn control to “off” then remove plug from outlet.
10. WARNING: During use, do not place or leave appliance where it
may be (1) damaged by an animal or (2) exposed to the weather.
SAVE THESE INSTRUCTIONS
THIS PRODUCT INTENDED FOR PROFESSIONAL USE
To reduce the risk of electric shock, this appliance has a polarized plug (one
blade is wider than the other). This plug will fit in a polarized outlet only one
way. If the plug does not fit fully in the outlet, reverse the plug. If it still does
not fit, contact a qualified electrician to install the proper outlet. Do not change
the plug in any way.
OPERATING INSTRUCTIONS
Please read the following instructions before using your new Andis clipper. Give
it the care that a fine precision built instrument deserves and it will give you
years of service. Plug cord into electrical outlet, operate 120 volt, 60 cycle AC
electrical current or as noted on unit.
2-SPEED OPERATION
Your Andis clipper comes with normal and high speed operation (Diagram A).
Use the normal setting (setting #1) for most cutting needs. Use the high speed
setting (setting #2) for cutting through heavy hair. To start clipper move switch
button by pressing down on the lock mechanism and moving to the #1 or #2
position. To stop, press down on the lock mechanism and move switch button
back to original position. After using your Andis clipper, rewrap cord, and store
in a safe place.
REMOVING BLADE SET
To remove blade set, first make sure your clipper motor is switched “OFF”. Push
blade release mechanism under blade hinge (Diagram B). While holding down
the blade release mechanism, push down on blade, then gently pull the blade
forward (Diagram C), and slide it off the blade hinge. If your blade hinge should
snap closed and is flush with the clipper, use a small standard screwdriver to
pry the tongue of the hinge out (Diagram D). Hair may accumulate in the NOTE:
front cavity of the housing under the blade. If this happens, you can clean out
the hair by brushing out the cavity with a small brush or an old toothbrush while
the blade is off the clipper (See Diagram E for location of cavity being referenced).

Specyfikacje produktu

Marka: Andis
Kategoria: kosiarka
Model: AGC2

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Andis AGC2, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje kosiarka Andis

Andis

Andis AGC2 Instrukcja

7 Września 2024

Instrukcje kosiarka

Najnowsze instrukcje dla kosiarka

Hecht

Hecht 5564 SX Instrukcja

15 Października 2024
Craftsman

Craftsman 25365 Instrukcja

15 Października 2024
AL-KO

AL-KO Solo 4758 VSI Instrukcja

15 Października 2024
AL-KO

AL-KO Classic 4.64 SP-S Instrukcja

15 Października 2024
Gardena

Gardena PowerMax 36 A Li Instrukcja

15 Października 2024
Einhell

Einhell BG-PM 46 Instrukcja

14 Października 2024
Stihl

Stihl RMA 235 Instrukcja

13 Października 2024
Einhell

Einhell GC-PM 46 S Instrukcja

11 Października 2024
BaByliss

BaByliss Pro FX660E Instrukcja

11 Października 2024
Conair

Conair HC108RGB Instrukcja

9 Października 2024