Instrukcja obsługi Ampeg SVT-8 Pro
Ampeg
Versterker
SVT-8 Pro
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Ampeg SVT-8 Pro (9 stron) w kategorii Versterker. Ta instrukcja była pomocna dla 12 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/9
Bass Amplifier
Bass Amplifier
User's Guide for the
INPUT
–12dB
MUTE
0 10
1 2 3 4 5
PEAK
ULTRA HIGH
BRIGHT
GAIN
0 10 0 10
MIDRANGE
0 10
ON
TREBLE DRIVE POWER
POWER
MASTER
FAULT
LIMIT
ON
POWER REDUCTION
PULL ON
BASSULTRA LOW
1 2 3 4 5
FREQUENCY
SVT-8 PRO Bass Amplifier
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators,
heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades with
one wider than the other. A grounding-type plug has two
blades and a third grounding prong. The wide blade or the
third prong are provided for your safety. If the provided
plug does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
10.
Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the point
where they exit from the apparatus.
11.
Only use attachments/accessories specified by the
manufacturer.
12.
Use only with a cart, stand, tripod, bracket,
or table specified by the manufacturer, or sold
with the apparatus. When a cart is used, use
caution when moving the cart/apparatus
combination to avoid injury from tip-over.
13.
Unplug this apparatus during lightning storms or when
unused for long periods of time.
14.
Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been damaged
in any way, such as power-supply cord or plug is damaged,
liquid has been spilled or objects have fallen into the
apparatus, the apparatus has been exposed to rain or
moisture, does not operate normally, or has been dropped.
15.
Please keep the unit in a good ventilation environment.
IMPORTANT SAFETY INSTRUCTIONS
16.
Do not overload wall outlets and extension cords as this
can result in a risk of fire or electric shock.
17.
This apparatus shall not be exposed to dripping or
splashing, and no object filled with liquids, such as vases
or beer glasses, shall be placed on the apparatus.
18.
This apparatus has been designed with Class-I
construction and must be connected to a mains socket
outlet with a protective earthing connection (the third
grounding prong).
19.
The MAINS plug or an appliance coupler is used as the
disconnect device, so the disconnect device shall remain
readily operable.
20.
For the terminals marked with symbol of “ ” may be
of sufficient magnitude to constitute a risk of electric shock.
The external wiring connected to the terminals requires
installation by an instructed person or the used of ready-
made leads or cords.
21.
The apparatus should be connected to a mains socket
outlet.
22.
No naked flame sources, such as lighted candles,
should be placed on the apparatus.
23.
To reduce the risk of damage, do not set the amplifier
on the feet of the rear panel. It is unstable and could easily
tip over. Use the feet on the bottom of the amplifier instead.
CAUTION AVIS
RISK OF ELECTRIC . DO NOT OPENSHOCK
RISQUE DE ELECTRIQUE. NE PAS OUVRIRCHOC
CAUTION: REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK)TO
NO USER-SE RVICEABLE PARTS INSIDE. REFER SERVICING QUALIFIED PERSONNELTO
ATTENTION: POUR EVITER LES RISQUES DE CHOC ELECTRIQUE, NE PAS ENLEVER LE COUVERCLE.
AUCUN ENTRETIEN DE PIECES INTERIEURES PAR L'USAGER.
CONFIER L'ENTRETIEN AU PERSONNEL QUALIFIE.
AVIS: POUR EVITER LES RISQUES D'INCENDIE OU D'ELECTROCUTION, N'EXPOSEZ S CET TICLE PA AR
A A LA PLUIE OU L'HUMIDITE
The lightning flash with arrowhead symbol within an equilateral triangle is
intended to alert the user to the presence of uninsulated "dangerous
voltage" within the product's enclosure, that may be of sufficient magnitude
to constitute a risk of electric shock to persons.
Le symbole éclair avec point de flèche à l'intérieur d'un triangle équilatéral
est utilisé pour alerter l'utilisateur de la présence à l'intérieur du coffret de
"voltage dangereux" non isolé d'ampleur suffisante pour constituer un risque
d'éléctrocution.
The exclamation point within an equilateral triangle is intended to alert the
user of the presence of important operating and maintenance (servicing)
instructions in the literature accompanying the appliance.
Le point d'exclamation à l'intérieur d'un triangle équilatéral est employé
pour alerter les utilisateurs de la présence d'instructions importantes pour le
fonctionnement et l'entretien (service) dans le livret d'instruction
accompagnant l'appareil.
Correct disposal of this product: This symbol indicates that this product should not be disposed of with your household waste,
according to the WEEE directive (2002/96/EC) and your national law. This product should be handed over to an authorized
collection site for recycling waste electrical and electronic equipment (EEE). Improper handling of this type of waste could have
a possible negative impact on the environment and human health due to potentially hazardous substances that are generally
associated with EEE. At the same time, your cooperation in the correct disposal of this product will contribute to the effective
usage of natural resources. For more information about where you can drop off your waste equipment for recycling, please
contact your local city office, waste authority, or your household waste disposal service.
PORTABLE CART
WARNING
TABLE OF CONTENTS
Important Safety Instructions .................................................2
Introduction / Features ..........................................................3
The Front Panel ....................................................................4
The Rear Panel .....................................................................5
Some Suggested Settings / Rack Mounting ............................6
Troubleshooting / Block Diagram ...........................................7
Technical Specifications .........................................................8
WARNING — To reduce the risk of fire or electric shock, do not
expose this apparatus to rain or moisture.
CONSIGNES DE SECURITE IMPORTANTES
- LIRE, SUIVRE TOUTES LES INSTRUCTIONS ET LES PRECAUTIONS D’UTILISATION
- NE PAS UTILISER PROCHE D’UNE SOURCE DE CHALEUR ET NE PAS BLOQUER OU OBSTRUER LE SYSTEME DE VENTILATION SUR CET APPAREIL. POUR UNE
UTILISATION CONFORME, CET APPAREIL NECESSITE ENVIRON 7CM D’ESPACE BIEN VENTILE AUTOUR DE SON SYSTEME DE REFROIDISSEMENT, AINSI QU’UN COURANT
D’AIR FRAIS CONSTANT
- NE PAS UTILISER CET APPAREIL PROCHE D’UNE SOURCE LIQUIDE
- NETTOYER SEULEMENT A L’AIDE D’UN CHIFFON DOUX ET SEC ET NE PAS UTILISER DE PRODUITS MENAGERS
- CONNECTER UNIQUEMENT LE CABLE D’ALIMENTATION FOURNI SUR UNE PRISE AVEC MISE A LA TERRE, ET COMPATIBLE AVEC LA TENSION, L’INTENSITE ET LA
FREQUENCE REQUISES INDIQUEES SUR LA FACE ARRIERE DE L’APPAREIL
- S’ASSURER DE NE PAS MARCHER, PLIER OU TIRER SUR LE CABLE D’ALIMENTATION
- DEBRANCHER L’APPAREIL LORS D’UNE TEMPETE OU LORS D’UNE TRES LONGUE PERIODE DE NON UTILISATION
- UTILISER UNIQUEMENT DES ACCESSOIRES SPECIFIES PAR LE FABRICANT POUR UNE UTILISATION EN TOUTE SECURITE ET POUR EVITER DES BLESSURES
- ATTENTION: AFIN DE PREVENIR TOUT RISQUE DE CHOCS ELECTRIQUES OU DE DEBUT D’INCENDIE, NE PAS EXPOSER CET APPAREIL A LA PLUIE ET A L’HUMIDITE
- TOUT ENTRETIEN DOIT ETRE FAIT PAR UN TECHNICIEN QUALIFIE
- NOS AMPLIFICATEURS PEUVENT PRODUIRE DE TRES HAUTES PRESSIONS ACOUSTIQUES QUI PEUVENT CAUSER DES DOMMAGES AUDITIFS PERMANENTS OU
DEFINITIFS. L’UTILISER AVEC UNE GRANDE PRECAUTION EST CONSEILLE ET DES PROTECTIONS AUDITIVES SONT RECOMMANDEES POUR UNE UTILISATION A FORT
VOLUME.
- ATTENTION: CET APPAREIL REQUIERT UNE PRISE MURALE AVEC MISE A LA TERRE, AUX NORMES ACTUELLES ET COMPATIBLE AVEC LES SPECIFICATIONS
ELECTRIQUES SE TROUVANT EN FACE ARRIERE DE L’APPAREIL. LA PRISE ELECTRIQUE DOIT RESTER ACCESSIBLE POUR DEBRANCHER L’APPAREIL EN CAS DE DEFAUT
PENDANT L’UTILISATION
- CET APPAREIL DOIT ETRE DEBRANCHE SI IL N’EST PAS UTILISE
Elimination correcte du produit : Ce symbole indique que ce produit ne doit pas être éliminé avec les ordures ménagères, comme le prévoiT la directive WEEE (2002/96/
EC) et votre loi nationale.
Ce produit doit être remis à un site de recyclage des déchets électriques et des équipements électroniques (EEE).
Un mauvais recyclage de ce type de déchet peut avoir de possibles impacts négatifs sur l’environnement et la santé humaine dus aux émanations de substances.
Dans un même temps, votre coopération à un recyclage correct de ce produit contribuera à la bonne utilisation des ressources naturelles.
Pour connaître l’endroit où il est possible de recycler ces équipements, merci de contacter votre mairie, les services de recyclages ou le service des déchets ménagers.
NOTE: This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to part 15 of
the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instruc-
tions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interfer-
ence to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
• Reorientorrelocatethereceivingantenna.
• Increasetheseparationbetweentheequipmentandthe
receiver.
• Connecttheequipmentintoanoutletonacircuitdifferent
from that to which the receiver is connected.
• Consultthedealeroranexperiencedradio/TVtechnicianfor
help.
CAUTION: Changes or modifications to this device not expressly
approved by LOUD Technologies Inc. could void the user's authority
to operate the equipment under FCC rules.
This apparatus does not exceed the Class A/Class B (whichever
is applicable)
limits for radio noise emissions from digital appara-
tus as
set out in the radio interference regulations of the Canadian
Department
of Communications.
ATTENTION — Le présent appareil numérique n’émet pas de
bruits radioélectriques dépassant las limites applicables aux appa-
reils numériques de class A/de class B (selon le cas) prescrites
dans le réglement sur le brouillage radioélectrique édicté par les
ministere des communications du Canada.
Exposure to extremely high noise levels may cause permanent
hearing loss. Individuals vary considerably in susceptibility to noise-
induced hearing loss, but nearly everyone will lose some hearing
if exposed to sufficiently intense noise for a period of time. The
U.S. Government’s Occupational Safety and Health Administration
(OSHA) has specified the permissible noise level exposures shown
in the following chart.
According to OSHA, any exposure in excess of these per-
missible limits could result in some hearing loss. To ensure against
potentially dangerous exposure to high sound pressure levels, it is
recommended that all persons exposed to equipment capable of
producing high sound pressure levels use hearing protectors while
the equipment is in operation. Ear plugs or protectors in the ear
canals or over the ears must be worn when operating the equip-
ment in order to prevent permanent hearing loss if exposure is in
excess of the limits set forth here:
Duration, per
day in hours
Sound
Level dBA, Slow
Response
Typical Example
8 90 Duo in small club
6 92
4 95 Subway Train
3 97
2 100 Very loud classical music
1.5 102
1 105 The boss screaming at his minions about
manual deadlines
0.5 110
0.25 or less 115 Loudest parts at a rock concert
Specyfikacje produktu
| Marka: | Ampeg |
| Kategoria: | Versterker |
| Model: | SVT-8 Pro |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Ampeg SVT-8 Pro, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Versterker Ampeg
3 Lipca 2024
3 Lipca 2024
2 Lipca 2024
2 Lipca 2024
2 Lipca 2024
2 Lipca 2024
1 Lipca 2024
1 Lipca 2024
30 Czerwca 2024
30 Czerwca 2024
Instrukcje Versterker
- Versterker Yamaha
- Versterker Pioneer
- Versterker Nedis
- Versterker Tangent
- Versterker Auna
- Versterker Pyle
- Versterker Samson
- Versterker Eden
- Versterker Vonyx
- Versterker NAD
- Versterker Harman Kardon
- Versterker Arcam
- Versterker Advance Acoustic
- Versterker Fender
- Versterker Power Dynamics
- Versterker Alecto
- Versterker Reloop
- Versterker Fenton
- Versterker American Audio
- Versterker Luxman
Najnowsze instrukcje dla Versterker
18 Września 2024
15 Września 2024
15 Września 2024
15 Września 2024
13 Września 2024
12 Września 2024
12 Września 2024
12 Września 2024
10 Września 2024
7 Września 2024