Instrukcja obsługi Ampeg BA115HP
Ampeg
Versterker
BA115HP
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Ampeg BA115HP (8 stron) w kategorii Versterker. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/8
BA115HP
BA210
Bassamp Cube
User’s Guide
BA115HP/BA210 Bassamp Cube
2
TABLE OF CONTENTS:
Important Safeguards and Precautions . . . . . . . . . . . . . . . . . . . . .3
The Top Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4,5
The Electronic Tuner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
System Block Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Technical Specifications . . . . . . . . . . . . . . . . . . . . . . . . .back cover
IMPORTANT SAFETY INSTRUCTIONS
•READ, FOLLOW, HEED, AND KEEP ALL INSTRUCTIONS AND WARNINGS.
•DO NOT OPERATE NEAR ANY HEAT SOURCE AND DO NOT BLOCK ANY VENTILATION OPENINGS ON THIS APPARATUS. FOR
PROPER OPERATION, THIS UNIT REQUIRES 3” (75mm) OF WELL VENTILATED SPACE AROUND HEATSINKS AND OTHER AIR
FLOW PROVISIONS IN THE CABINET.
•DO NOT USE THIS APPARATUS NEAR SPLASHING, FALLING, SPRAYING, OR STANDING LIQUIDS.
•CLEAN ONLY WITH LINT-FREE DAMP CLOTH AND DO NOT USE CLEANING AGENTS.
•ONLY CONNECT POWER CORD TO A POLARIZED, SAFETY GROUNDED OUTLET WIRED TO CURRENT ELECTRICAL CODES AND
COMPATIBLE WITH VOLTAGE, POWER, AND FREQUENCY REQUIREMENTS STATED ON THE REAR PANEL OF THE APPARATUS.
•PROTECT THE POWER CORD FROM DAMAGE DUE TO BEING WALKED ON, PINCHED, OR STRAINED.
•UNPLUG THE APPARATUS DURING LIGHTNING STORMS OR WHEN UNUSED FOR LONG PERIODS OF TIME.
•ONLY USE ATTACHMENTS, ACCESSORIES, STANDS, OR BRACKETS SPECIFIED BY THE MANUFACTURER FOR
SAFE OPERATION AND TO AVOID INJURY.
•WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK OR FIRE, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE..
•SERVICE MUST BE PERFORMED BY QUALIFIED PERSONNEL.
•OUR AMPLIFIERS ARE CAPABLE OF PRODUCING HIGH SOUND PRESSURE LEVELS. CONTINUED EXPOSURE TO HIGH SOUND
PRESSURE LEVELS CAN CAUSE PERMANENT HEARING IMPAIRMENT OR LOSS. USER CAUTION IS ADVISED AND EAR PRO-
TECTION IS RECOMMENDED IF UNIT IS OPERATED AT HIGH VOLUME.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOIS-
TURE. TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER. NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
"IT IS NECESSARY FOR THE USER TO REFER TO THE INSTRUCTION MANUAL"
“ES NECESARIO QUE EL USUARIO SE REFIERA AL MANUAL DE INSTRUCCIONES.”
"REFERREZ-VOUS AU MANUAL D'UTILISATION"
EXPLANATION OF GRAPHICAL SYMBOLS:
EXPLICACION DE SIMBOLOS GRAFICOS:
EXPLICATION DES SYMBÔLES GRAPHIQUES:
"DANGEROUS VOLTAGE"
“VOLTAJE PELIGROSO”
"DANGER HAUTE TENSION"
==
PRECAUCION
RIESGO DE CORRIENTAZO
NO ABRA
PRECAUCION: PARA REDUCIR EL RIESGO DE INCENDIOS O DESCARGAS
ELECTRICAS, NO PERMITA QUE ESTE APARATO QUEDE EXPUESTO A LA
LLUVIA O LA HUMEDAD. PARA DISMINUOIR EL RIESGO DE CORRIENTAZO.
NO ABRA LA CUBIERTA. NO HAY PIEZAS ADENTRO QUE EL USARIO PUEDO
REPARAR DEJE TODO MANTENIMIENTO A LOS TECHNICOS CALIFICADOS.
ATTENTION
RISQUE D'ELECTROCUTION
NE PAS OUVRIR
ATTENTION: PROTÉGEZ CET APPAREIL DE LA PLUIE ET DE L'HUMIDITÉ
AFIN D'ÉVITER TOUT RISQUE D'INCENDIE OU D'ÉLECTROCUTION. POUR
REDUIRE D'ELECTROCUTION NE PAS ENLEVER LE COUVERCLE. AUCUNE
PIECE INTERNE N'EST REPRABLE PAR L'UTILISATEUR. POUR TOUTE
REPARATION, S'ADRESSER A UN TECHNICIEN QUALIFIE.
BA115HP/BA210 Bassamp Cube
3
IMPORTANT SAFEGUARDS AND PRECAUTIONS:
All Ampeg products are designed for continuous safe operation, as long as common sense
is used and steps are taken to help avoid certain problems. Abiding by the following rules
can help prevent damage to your amplifier, yourself and others.
•The amplifier is equipped with a three-pronged AC power cord. To reduce the risk of
electrical shock, remove or otherwise attempt to defeat the ground pin of theNEVER
power cord.
•Connect the amplifier ONLY to a properly grounded AC outlet of the proper voltage
for your amp.
•Avoid sudden temperature extremes, rain and moisture. Also, avoid sudden and
intense impact. (If the unit has been subjected to any of the preceding abuses, have
it looked at by an authorized service center.)
•NEVER set the amplifier on a support that might give out under its weight.
•Always keep the total speaker impedance at or above the rated load.
•Unplug the amplifier before cleaning it. spray liquid cleaners onto the ampli-NEVER
fier. Wipe it with a slightly dampened, lint-free cloth to remove dirt and film.
•Do not use the amplifier if it has sustained damage to the chassis, controls, or power
cord. Refer the unit to an authorized service center for inspection.
•Amplifiers capable of producing high volume levels are also capable of inflicting per-
manent hearing loss or damage, if the exposure to such levels is prolonged. Such
damage is progressive and irreversible!
Specyfikacje produktu
| Marka: | Ampeg |
| Kategoria: | Versterker |
| Model: | BA115HP |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Ampeg BA115HP, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Versterker Ampeg
3 Lipca 2024
3 Lipca 2024
2 Lipca 2024
2 Lipca 2024
2 Lipca 2024
2 Lipca 2024
1 Lipca 2024
1 Lipca 2024
30 Czerwca 2024
30 Czerwca 2024
Instrukcje Versterker
- Versterker Yamaha
- Versterker Pioneer
- Versterker Nedis
- Versterker Tangent
- Versterker Auna
- Versterker Pyle
- Versterker Samson
- Versterker Eden
- Versterker Vonyx
- Versterker NAD
- Versterker Harman Kardon
- Versterker Arcam
- Versterker Advance Acoustic
- Versterker Fender
- Versterker Power Dynamics
- Versterker Alecto
- Versterker Reloop
- Versterker Fenton
- Versterker American Audio
- Versterker Luxman
Najnowsze instrukcje dla Versterker
18 Września 2024
15 Września 2024
15 Września 2024
15 Września 2024
13 Września 2024
12 Września 2024
12 Września 2024
12 Września 2024
10 Września 2024
7 Września 2024