Instrukcja obsługi American DJ Ultra HEX Bar 12

American DJ Nie skategoryzowane Ultra HEX Bar 12

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla American DJ Ultra HEX Bar 12 (14 stron) w kategorii Nie skategoryzowane. Ta instrukcja była pomocna dla 6 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/14

User Instructions

4/15

specications, diagrams, images, and instructions herein are

subject to change without notice. ADJ Products, LLC logo and

identifying product names and numbers herein are trademarks

of ADJ Products, LLC. Copyright protection claimed includes all

forms and matters of copyrightable materials and information

now allowed by statutory or judicial law or hereinafter granted.

Product names used in this document may be trademarks or

registered trademarks of their respective companies and are

hereby acknowledged. All non-ADJ Products, LLC brands and

product names are trademarks or registered trademarks of their

respective companies.

ADJ Products, LLC and all aliated companies hereby dis-

claim any and all liabilities for property, equipment, building, and

electrical damages, injuries to any persons, and direct or indi-

rect economic loss associated with the use or reliance of any

information contained within this document, and/or as a result

of the improper, unsafe, unsucient and negligent assembly,

installation, rigging, and operation of this product.

Europe Energy Saving Notice

Energy Saving Matters (EuP 2009/125/EC)

Saving electric energy is a key to help protecting the enviroment.

Please turn o all electrical products when they are not in use. To

avoid power consumption in idle mode, disconnect all electrical

equipment from power when not in use. Thank you!

ULTRA HEX BAR 12

ADJ Products, LLC - www.adj.com - Ultra Hex Bar 12 User Manual Page 3

• Multi-Colors

• Six Operating Modes

• Electronic Dimming 0-100%

• Built in Microphone

• DMX-512 protocol

• 3-Pin DMX Connection

• 5 DMX Modes: 6 Channel Mode, 7 Channel Mode, 8 Channel

Mode, 12 Channel Mode, & 36 Channel Mode.

• ADJ RFC compatiable (Sold Separately)

• Power Cord Daisy Chain (See page 22)

Ultra Hex Bar 12 Warranty Registration

Ultra Hex Bar 12 Features

The Ultra Hex Bar 12 2 year limited warranty. Please fill out carries a

the enclosed warranty card to validate your purchase. All returned

service items whether under warranty or not, must be freight pre-paid

and accompany a return authorization (R.A.) number. The R.A. number

must be clearly written on the outside of the return package. A brief

description of the problem as well as the R.A. number must also be

written down on a piece of paper included in the shipping carton. If

the unit is under warranty, you must provide a copy of your proof of

purchase invoice. You may obtain a R.A. number by contacting our

customer support team on our customer support number. All pack-

ages returned to the service department not displaying a R.A. number

on the outside of the package will be returned to the shipper.

The unit should be mounted using a mounting clamp (not provided),

axing it to the mounting bracket that is provided with the unit.

Always ensure that the unit is rmly xed to avoid vibration and slip-

ping while operating. Always ensure that the structure to which you

are attaching the unit is secure and is able to support a weight of 10

times the unit’s weight. Also, always use a safety cable that can hold

12 times the weight of the unit when installing the xture.

The equipment must be installed by a professional, and it must be

installed in a place where it is out of the reach of people’s grasp.

Ultra Hex Bar 12 Installation

Ultra Hex Bar 12 Introduction

ADJ Products, LLC - www.adj.com - Ultra Hex Bar 12 User Manual Page 2

Unpacking: Thank you for purchasing the Ultra Hex Bar 12 by ADJ

Products, LLC. Every Ultra Hex Bar 12 has been thoroughly tested and

has been shipped in perfect operating condition. Carefully check the

shipping carton for damage that may have occurred during shipping.

If the carton appears to be damaged, carefully inspect your xture for

any damage and be sure all accessories necessary to operate the unit

has arrived intact. In the case damage has been found or parts are

missing, please contact our toll free customer support number for fur-

ther instructions. Do not return this unit to your dealer without rst con-

tacting customer support.

Introduction: The Ultra Hex Bar 12 is a DMX intelligent, LED bar fix-

ture. This xture can be used in a stand alone mode or connected in a

Master/Slave conguration. This par has six operating modes: Sound

Active mode, Auto mode, Program mode, RGBWA + UV dimmer mode,

Static Color mode, and DMX control mode.

Customer Support: ADJ Products, LLC provides a customer support

line, to provide set up help and to answer any question should you

encounter problems during your set up or initial operation. You may

also visit us on the web at www.adj.com for any comments or sugges-

tions. Service Hours are Monday through Friday 8:00 a.m. to 4:30 p.m.

Pacic Standard Time.

Voice: (800) 322-6337

Fax: (323) 582-2941

E-mail: support@americandj.com

Warning! To prevent or reduce the risk of electrical shock or re, do

not expose this unit to rain or moisture.

Caution! There are no user serviceable parts inside this unit. Do not

attempt any repairs yourself, doing so will void your manufactures war-

ranty. In the unlikely event your unit may require service please contact

ADJ Products, LLC.

PLEASE recycle the shipping carton when ever possible.

ADJ Products, LLC - www.adj.com - Ultra Hex Bar 12 User Manual Page 5

Ultra Hex Bar 12 Safety Precautions

ADJ Products, LLC - www.adj.com - Ultra Hex Bar 12 User Manual Page 4

• To reduce the risk of electrical shock or re, do not expose this unit

rain or moisture

• Do not spill water or other liquids into or on to your unit.

• Do not attempt to operate this unit if the power cord has been

frayed or broken. Do not attempt to remove or break o the ground

prong from the electrical cord. This prong is used to reduce the risk

of electrical shock and re in case of an internal short.

• Disconnect from main power before making any type of connection.

• Do not remove the cover under any conditions. There are no user

serviceable parts inside.

• Never operate this unit when it’s cover is removed.

• Never plug this unit in to a dimmer pack

• Always be sure to mount this unit in an area that will allow proper

ventilation. Allow about 6” (15cm) between this device and a wall.

• Do not attempt to operate this unit, if it becomes damaged.

• This unit is intended for indoor use only, use of this product out`

doors voids all warranties.

• During long periods of non-use, disconnect the unit’s main power.

• Always mount this unit in safe and stable matter.

• Power-supply cords should be routed so that they are not likely to

be walked on or pinched by items placed upon or against them,

paying particular attention to the point they exit from the unit.

• Cleaning -The fixture should be cleaned only as recommended by

t he manufacturer. See page 22 for cleaning details.

• Heat -The appliance should be situated away from heat sources

such as radiators, heat registers, stoves, or other appliances (inclu-

d ing amplifiers) that produce heat.

• The fixture should be serviced by qualified service personnel when:

A. The power-supply cord or the plug has been damaged.

B. Objects have fallen, or liquid has been spilled into the appliance.

C. The appliance has been exposed to rain or water.

D. The appliance does not appear to operate normally or exhibits a

marked change in performance.

Power Supply: The ADJ Ultra Hex Bar 12 contains a automatic volt-

age switch, which will auto sense the voltage when it is plugged into

the power source. With this switch there is no need to worry about the

correct power voltage, this unit can be plugged in anywhere.

DMX-512: DMX is short for Digital Multiplex. This is a universal pro-

tocol used as a form of communication between intelligent fixtures

and controllers. A DMX controller sends DMX data instructions from

the controller to the fixture. DMX data is sent as serial data that trav-

els from fixture to fixture via the DATA “IN” and DATA “OUT” XLR ter-

minals located on all DMX fixtures (most controllers only have a DATA

“OUT” terminal).

DMX Linking: DMX is a language allowing all makes and models of

dierent manufactures to be linked together and operate from a single

controller, as long as all xtures and the controller are DMX compli-

ant. To ensure proper DMX data transmission, when using several

DMX fixtures try to use the shortest cable path possible. The order

in which fixtures are connected in a DMX line does not influence the

DMX addressing. For example; a fixture assigned a DMX address of 1

may be placed anywhere in a DMX line, at the beginning, at the end,

or anywhere in the middle. When a fixture is assigned a DMX address

of 1, the DMX controller knows to send DATA assigned to address 1

to that unit, no matter where it is located in the DMX chain.

Data Cable (DMX Cable) Requirements (For DMX Operation):

The Ultra Hex Bar 12 can be controlled via DMX protocol. The Ultra Hex

Bar 12 has 5 DMX channel modes, please see pages 7-8 for the dierent

modes. Your unit and your DMX controller require a standard 3-pin XLR

connector for data input and data output (Figure

1). We recommend Accu-Cable DMX cables.

If you are making your own cables, be sure to

use standard 110-120 Ohm shielded cable (This

cable may be purchased at almost all pro lighting

stores). Your cables should be made with a male

and female XLR connector on either end of the

cable. Also remember that DMX cable must be

daisy chained and cannot be split.

Notice: Be sure to follow gures two and three when making your own

cables. Do not use the ground lug on the XLR connector. Do not con-

Ultra Hex Bar 12 Set Up

Figure 1

Specyfikacje produktu

Marka:	American DJ
Kategoria:	Nie skategoryzowane
Model:	Ultra HEX Bar 12

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z American DJ Ultra HEX Bar 12, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje Nie skategoryzowane American DJ

American DJ UV COB Cannon Instrukcja

3 Kwietnia 2025

American DJ Encore Burst 100 IP Instrukcja

3 Kwietnia 2025

American DJ COB Cannon LP200ST Instrukcja

2 Kwietnia 2025

American DJ Encore LP5IP Instrukcja

2 Kwietnia 2025

American DJ Hydro Beam X12 Instrukcja

1 Kwietnia 2025

American DJ Ultra HEX Bar 12 Instrukcja

30 Marca 2025

American DJ Focus Flex Instrukcja

30 Marca 2025

American DJ POW-R Bar Rack USB Instrukcja

29 Marca 2025

Instrukcje Nie skategoryzowane

Najnowsze instrukcje dla Nie skategoryzowane

Planet PWR-240-48 Instrukcja

9 Kwietnia 2025

CaterChef 445001 Instrukcja

9 Kwietnia 2025

Daikin EKWCTRDI1V3 Instrukcja

9 Kwietnia 2025

Simplified MFG SP18CAT120 Instrukcja

9 Kwietnia 2025

AudioQuest Pegasus Instrukcja

9 Kwietnia 2025

Reolink P330 Instrukcja

9 Kwietnia 2025

Reolink NVS16-8MB8 Instrukcja

9 Kwietnia 2025

Drive Medical RTL12045 Instrukcja

9 Kwietnia 2025

Kern MBC-A05 Instrukcja

9 Kwietnia 2025

Daikin EKEXVA250 Instrukcja

9 Kwietnia 2025