Instrukcja obsługi Aluratek AMAP01F

Aluratek oczyszczacz powietrza AMAP01F

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Aluratek AMAP01F (2 stron) w kategorii oczyszczacz powietrza. Ta instrukcja była pomocna dla 12 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/2
Air Inlet
Sensor Air Outlet
Operation Panel
Air Quality Indicator
Filter Reminder
Air Quality
Timer Setting
Sleep
Timer Power
Speed
Open directly from the side
Speed Setting
qsg Q10607 Copyright © 2022 Aluratek, Inc. All Rights Reserved.
model AMAP01F
Quick Start Guide
HEPA H13 with PM2.5 Monitor
Air Purifier
Filter
Package Contents
Your order has been carefully packaged and inspected.
The following accessories should be included in your
package. Please inspect the contents of the package to
ensure that you have received all items and that nothing
has been damaged. If you discover a problem, please
contact us immediately for assistance.
Product Highlights Operation Operation
Filter Installation Purifier Instructions
Operation
Purifier Instructions
Operation
Filter maintenance WARNING!!! This equipment has been tested and
found to comply with the limits of a Class B digital
device, pursuant to part 15 of the FCC rules.
These limits are designed to provide reasonable
protection against harmful interference in a
residential installation.
This equipment generates, uses and can radiate
radio frequency energy and, if not installed and
used in accordance with the instruction, may cause
harmful interference to radio communications.
However, there is no guarantee that interference
will not occur in a particular installation. If this
equipment does cause harmful interference to
radio or television reception, which can be
determined by turning the equipment off and on,
the user is encouraged to try to correct the
interference by whatever measures may be
required to correct the interference.
Radio and TV Interference Statement Technical Support and Warranty
If you need further assistance, please contact the
Aluratek support department for troubleshooting
prior to returning this device.
E-mail: support@aluratek.com
Web: www.aluratek.com/helpdesk
Local (Irvine, CA): 714-586-8730
Toll free: 1-866-580-1978
Aluratek warrants this product against defect
in material or workmanship for 1 YEAR
from the date of purchase.
For more information, please visit:
https://aluratek.com/warranty-return-policy
You can register your product online at:
https://aluratek.com/product-registration
1. Remove the air inlet cover
2. Remove the filter
3. Remove the plastic bag from the filter and reinsert
4. Replace the air inlet cover
After the purifier is plugged in to a wall outlet, you will hear
a single beep with the display lights up for a second, then
it will go to standby mode where the display will be off with
the power button light up in red.
Air Quality indicator:
Green good means air quality
Yellow moderate means air quality
Red bad means air quality.
This purifier uses a Hepa Carbon filter. It is suggested to
be replaced every two months.
After a run time of 1500 hours, the purifier’s replacement
filter icon will light up.
• Place the filter in a ventilated place
• Do not expose to excessive sunlight
• Do not wash the filter with water
• Unplug the power plug before replacing the filter,
cleaning and maintenance
• Do not operate with the filter removed as this may cause
equipment failure
• Unplug the power cord when the purifier is idle for a long
period of time
To power on the purifier, press the power
button, the display will light up and the
purifier will enter auto mode.
When the purifier is on, you can press the
timer button to set the timer between 1-8
hours. You can verify the timer is set when
you see the timer icon lit on the display.
The timer can be cancelled by press and
hold the timer button for about 3 seconds.
You can change the speed of the fan by
pressing the fan icon to change between
auto (A), slow (1), medium (2), fast (4)
and sleep (SLE).
For Sleep mode, the fan speed will
change to slow with the display turned off
except the sleep icon. To exit sleep mode,
just touch the screen and change the fan
speed to other settings.
When the filter reminder icon is lit, please
change the filter. Once the filter is replaced,
during standby mode, press and hold the
filter button to reset the filter life counter.
To power off the purifier, press the power
button, the display will turn off and the
power button will light up in red.
Power
Timer
Speed
Sleep
Reset
Power
OFF

Specyfikacje produktu

Marka: Aluratek
Kategoria: oczyszczacz powietrza
Model: AMAP01F

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Aluratek AMAP01F, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje oczyszczacz powietrza Aluratek

Aluratek

Aluratek AMAP01F Instrukcja

14 Września 2024

Instrukcje oczyszczacz powietrza

Najnowsze instrukcje dla oczyszczacz powietrza

Ulsonix

Ulsonix AIRCLEAN 20G Instrukcja

15 Października 2024
Winix

Winix AUS-5500 Instrukcja

14 Października 2024
Gorenje

Gorenje H08WB Instrukcja

9 Października 2024
Clean Air Optima

Clean Air Optima CA-510 Pro Smart Instrukcja

9 Października 2024
Ufesa

Ufesa PF4500 Instrukcja

9 Października 2024
Ufesa

Ufesa Clean Air Connect PF6500 Instrukcja

9 Października 2024
Ufesa

Ufesa PF3500 Instrukcja

9 Października 2024
Samsung

Samsung AX32BG3100GB Instrukcja

9 Października 2024
GE

GE AHG50LE Instrukcja

9 Października 2024
Miele

Miele PAC 1200 Instrukcja

9 Października 2024